=======================================================================
VERITAS Volume Manager 5.0 MP3HF1 for Linux

This is a hotfix patch 1 for Veritas Volume Manager 5.0MP3 on Linux.
This patch can only be installed on top of the following:
		VERITAS Volume Manager 5.0MP3
=======================================================================
SmartMove can be used to migrate online to thin provisioning capable 
storage arrays and automatically reclaim unused space. In 5.0 MP3 GA, 
SmartMove only applies to the vxplex command and is turned off by 
default. This hotfix extends SmartMove to all supported VxVM move 
operations, layered volumes and instant snapshots. With the hotfix,
the default behavior is to use SmartMove for VxVM volumes that 
contain disks that are known to be thin, typically through automated 
discovery of device attributes.
=======================================================================

Patch Installation Instructions:
--------------------------------

o Before-the-upgrade :-
  (a) Stop I/Os to all the VxVM volumes.
  (b) Umount any filesystems with VxVM volumes.
  (c) Stop applications using any VxVM volumes.

o Select the appropriate RPMs for your system, and upgrade to the new patch.

(for rhel4_x86_64)
# rpm -ev --nodeps VRTSvxvm-platform
# rpm -ev --nodeps VRTSvxvm-common
# rpm -ihv VRTSvxvm-common-5.0.30.01-MP3HF1_RHEL4.i686.rpm
# rpm -ihv VRTSvxvm-platform-5.0.30.01-MP3HF1_RHEL4.x86_64.rpm

(for rhel4)
# rpm -ev --nodeps VRTSvxvm-platform
# rpm -ev --nodeps VRTSvxvm-common
# rpm -ihv VRTSvxvm-common-5.0.30.01-MP3HF1_RHEL4.i686.rpm
# rpm -ihv VRTSvxvm-platform-5.0.30.01-MP3HF1_RHEL4.i686.rpm

(for rhel5_x86_64)
# rpm -ev --nodeps VRTSvxvm-platform
# rpm -ev --nodeps VRTSvxvm-common
# rpm -ihv VRTSvxvm-common-5.0.30.01-MP3HF1_RHEL5.i686.rpm
# rpm -ihv VRTSvxvm-platform-5.0.30.01-MP3HF1_RHEL5.x86_64.rpm

(for rhel5)
# rpm -ev --nodeps VRTSvxvm-platform
# rpm -ev --nodeps VRTSvxvm-common
# rpm -ihv VRTSvxvm-common-5.0.30.01-MP3HF1_RHEL5.i686.rpm
# rpm -ihv VRTSvxvm-platform-5.0.30.01-MP3HF1_RHEL5.i686.rpm

(for sles9_x86_64)
# rpm -ev --nodeps VRTSvxvm-platform
# rpm -ev --nodeps VRTSvxvm-common
# rpm -ihv VRTSvxvm-common-5.0.30.01-MP3HF1_SLES9.i586.rpm
# rpm -ihv VRTSvxvm-platform-5.0.30.01-MP3HF1_SLES9.x86_64.rpm

(for sles9)
# rpm -ev --nodeps VRTSvxvm-platform
# rpm -ev --nodeps VRTSvxvm-common
# rpm -ihv VRTSvxvm-common-5.0.30.01-MP3HF1_SLES9.i586.rpm
# rpm -ihv VRTSvxvm-platform-5.0.30.01-MP3HF1_SLES9.i586.rpm

(for sles10_x86_64)
# rpm -ev --nodeps VRTSvxvm-platform
# rpm -ev --nodeps VRTSvxvm-common
# rpm -ihv VRTSvxvm-common-5.0.30.01-MP3HF1_SLES10.i586.rpm
# rpm -ihv VRTSvxvm-platform-5.0.30.01-MP3HF1_SLES10.x86_64.rpm

(for sles10)
# rpm -ev --nodeps VRTSvxvm-platform
# rpm -ev --nodeps VRTSvxvm-common
# rpm -ihv VRTSvxvm-common-5.0.30.01-MP3HF1_SLES10.i586.rpm
# rpm -ihv VRTSvxvm-platform-5.0.30.01-MP3HF1_SLES10.i586.rpm

After installing the appropriate RPMs run "vxinstall" to re-enable vxconfigd.