* * * READ ME * * * * * * Symantec Volume Manager 6.2.1 * * * * * * Patch 400 * * * Patch Date: 2017-09-25 This document provides the following information: * PATCH NAME * OPERATING SYSTEMS SUPPORTED BY THE PATCH * PACKAGES AFFECTED BY THE PATCH * BASE PRODUCT VERSIONS FOR THE PATCH * SUMMARY OF INCIDENTS FIXED BY THE PATCH * DETAILS OF INCIDENTS FIXED BY THE PATCH * INSTALLATION PRE-REQUISITES * INSTALLING THE PATCH * REMOVING THE PATCH * KNOWN ISSUES PATCH NAME ---------- Symantec Volume Manager 6.2.1 Patch 400 OPERATING SYSTEMS SUPPORTED BY THE PATCH ---------------------------------------- AIX PACKAGES AFFECTED BY THE PATCH ------------------------------ VRTSvxvm BASE PRODUCT VERSIONS FOR THE PATCH ----------------------------------- * Symantec Dynamic Multi-Pathing 6.2 * Symantec Storage Foundation 6.2 * Symantec Storage Foundation Cluster File System HA 6.2 * Symantec Storage Foundation for Oracle RAC 6.2 * Symantec Storage Foundation HA 6.2 * Symantec Volume Manager 6.2 SUMMARY OF INCIDENTS FIXED BY THE PATCH --------------------------------------- Patch ID: 6.2.1.400 * 3913126 (3910432) When a mirror volume is created two log plexes are created by default. * 3915780 (3912672) "vxddladm assign names" causes ASM disks' user-group ownership/permissions loss affecting Oracle databases on system. * 3915781 (3910805) Data corruption can happen during "vxdisk resize" operation against GPT disk * 3917323 (3917786) Storage of cold data on dedicated SAN storage spaces increases storage cost and maintenance.Move cold data from local storage to cloud storage. Patch ID: 6.2.1.300 * 3802857 (3726110) On systems with high number of CPUs, Dynamic Multi-Pathing (DMP) devices may perform considerably slower than OS device paths. * 3803497 (3802750) VxVM (Veritas Volume Manager) volume I/O-shipping functionality is not disabled even after the user issues the correct command to disable it. * 3851117 (3662392) In the Cluster Volume Manager (CVM) environment, if I/Os are getting executed on slave node, corruption can happen when the vxdisk resize(1M) command is executing on the master node. * 3852148 (3852146) Shared DiskGroup(DG) fails to import when "-c" and "-o noreonline" options are specified together * 3854788 (3783356) After Dynamic Multi-Pathing (DMP) module fails to load, dmp_idle_vector is not NULL. * 3863971 (3736502) Memory leakage is found when transaction aborts. * 3871040 (3868444) Disk header timestamp is updated even if the disk group(DG) import fails. * 3874737 (3874387) Disk header information is not logged to the syslog sometimes even if the disk is missing and dg import fails. * 3875933 (3737585) "Uncorrectable write error" or panic with IOHINT in VVR (Veritas Volume Replicator) environment * 3877637 (3878030) Enhance VxVM DR tool to clean up OS and VxDMP device trees without user interaction. * 3879334 (3879324) VxVM DR tool fails to handle busy device problem while LUNs are removed from OS * 3880573 (3886153) vradmind daemon core dump occurs in a VVR primary-primary configuration because of assert() failure. * 3881334 (3864063) Application I/O hangs because of a race between the Master Pause SIO (Staging I/O) and the Error Handler SIO. * 3881335 (3867236) Application IO hang happens because of a race between Master Pause SIO(Staging IO) and RVWRITE1 SIO. * 3889284 (3878153) VVR 'vradmind' deamon core dump. * 3889850 (3878911) QLogic driver returns an error due to Incorrect aiusize in FC header * 3893134 (3864318) Memory consuming keeps increasing when reading/writing data against VxVM volume with big block size. * 3894783 (3628743) New BE takes too much time to startup during live upgrade on Solaris 11.2 * 3897764 (3741003) After removing storage from one of multiple plex in a mirrored DCO (Data Change Object) volume, entire DCO volume is detached and DCO object is having BADLOG flag marked because of a flag reset missing. * 3898129 (3790136) File system hang observed due to IO's in Ditry Region Logging (DRL). * 3898169 (3740730) While creating volume using vxassist CLI, dco log volume length specified at command line was not getting honored. * 3898175 (3748862) 'vxmpio' should handle a case when devices are busy such as rootvg devices. * 3898296 (3767531) In Layered volume layout with FSS configuration, when few of the FSS_Hosts are rebooted, Full resync is happening for non-affected disks on master. * 3902626 (3795739) In a split brain scenario, cluster formation takes very long time. * 3903647 (3868934) System panic happens while deactivate the SIO (staging IO). * 3904790 (3795788) Performance degrades when many application sessions open the same data file on the VxVMvolume. * 3904792 (3169854) Enabling DMP (Dynamic Multi-Pathing) native support fails on some AIX TL levels due to boot image size limit. * 3904796 (3853049) The display of stats delayed beyond the set interval for vxstat and multiple sessions of vxstat impacted the IO performance. * 3904797 (3857120) Commands like vxdg deport which try to close a VxVM volume might hang. * 3904800 (3860503) Poor performance of vxassist mirroring is observed on some high end servers. * 3904801 (3686698) vxconfigd was getting hung due to deadlock between two threads * 3904802 (3721565) vxconfigd hang is seen. * 3904804 (3486861) Primary node panics when storage is removed while replication is going on with heavy IOs. * 3904805 (3788644) Reuse raw device number when checking for available raw devices. * 3904806 (3807879) User data corrupts because of the writing of the backup EFT GPT disk label during the VxVM disk-group flush operation. * 3904807 (3867145) When VVR SRL occupation > 90%, then output the SRL occupation is shown by 10 percent. * 3904810 (3871750) In parallel VxVM vxstat commands report abnormal disk IO statistic data * 3904811 (3875563) While dumping the disk header information, human readable timestamp was not converted correctly from corresponding epoch time. * 3904819 (3811946) When invoking "vxsnap make" command with cachesize option to create space optimized snapshot, the command succeeds but a plex I/O error message is displayed in syslog. * 3904822 (3755209) The Veritas Dynamic Multi-pathing(VxDMP) device configured in Solaris Logical DOMains(LDOM) guest is disabled when an active controller of an ALUA array is failed. * 3904824 (3795622) With Dynamic Multipathing (DMP) Native Support enabled, Logical Volume Manager (LVM) global_filter is not updated properly in lvm.conf file. * 3904825 (3859009) global_filter of lvm.conf is not updated due to some paths of LVM dmpnode are reused during DDL(Device Discovery Layer) discovery cycle. * 3904833 (3729078) VVR(Veritas Volume Replication) secondary site panic occurs during patch installation because of flag overlap issue. * 3904834 (3819670) When smartmove with 'vxevac' command is run in background by hitting 'ctlr-z' key and 'bg' command, the execution of 'vxevac' is terminated abruptly. * 3904851 (3804214) VxDMP (Dynamic Multi-Pathing) path enable operation fails after the disk label is changed from guest LDOM. Open fails with error 5 on the path being enabled. * 3904858 (3899568) Adding tunable dmp_compute_iostats to start/stop the iostat gathering persistently. * 3904859 (3901633) vxrsync reports error during rvg sync because of incorrect volume end offset calculation. * 3904861 (3904538) IO hang happens during slave node leave or master node switch because of racing between RV(Replicate Volume) recovery SIO(Staged IO) and new coming IOs. * 3904863 (3851632) Some VxVM commands fail when you use the localized messages. * 3904864 (3769303) System pancis when Cluster Volume Manager (CVM) group is brought online * 3905471 (3868533) IO hang happens because of a deadlock situation. * 3906251 (3806909) Due to some modification in licensing , for STANDALONE DMP, DMP keyless license was not working. * 3907017 (3877571) Disk header is updated even if the dg import operation fails * 3907593 (3660869) Enhance the Dirty region logging (DRL) dirty-ahead logging for sequential write workloads DETAILS OF INCIDENTS FIXED BY THE PATCH --------------------------------------- This patch fixes the following incidents: Patch ID: 6.2.1.400 * 3913126 (Tracking ID: 3910432) SYMPTOM: When a mirror volume is created two log plexes are created by default. DESCRIPTION: - For a mirror/RAID 5 volumes a log plex is reqquired. Due to a bug in the code we are creating two log plex records while creation of a volume. RESOLUTION: Code changes are done to create a single log plex by default. * 3915780 (Tracking ID: 3912672) SYMPTOM: "vxddladm assign names" command results in the ASM disks losing their ownership/permission settings which may affect the Oracle databases DESCRIPTION: The command "vxddladm assign names" calls a function which creates raw and block device nodes and set the user-group ownership/permissions as per the mode stored in in-memory record structure. The in-memory records are not getting created (it is NULL) before going to that function. Hence no setting of permissions after device nodes' creation. RESOLUTION: Code changes are done to make sure that in-memory records of user-group ownership/permissions of each dmpnode from vxdmprawdev file gets created before the function call which creates device nodes and sets permissions on them. * 3915781 (Tracking ID: 3910805) SYMPTOM: Data corruption can happen during "vxdisk resize" operation against GPT disk. DESCRIPTION: VxVM doesn't use first 48 sectors on GPT disk. During vxdisk resize, VxVM needs to use absolute offset for disk IO. Due to code defect, such 48 sectors offset is still counted in during disk resize. RESOLUTION: Code has been changed to address the incorrect IO offset during resize for GPT disk. * 3917323 (Tracking ID: 3917786) SYMPTOM: Storage of cold data on dedicated SAN storage spaces increases storage cost and maintenance. DESCRIPTION: The local storage capacity is consumed by cold or legacy files which are not consumed or processed frequently. These files occupy dedicated SAN storage space, which is expensive. Moving such files to public or private S3 cloud storage services is a better cost-effective solution. Additionally, cloud storage is elastic allowing varying service levels based on changing needs. Operational charges apply for managing objects in buckets for public cloud services using the Storage Transfer Service. RESOLUTION: You can now migrate or move legacy data from local SAN storage to a target Private or public cloud. Patch ID: 6.2.1.300 * 3802857 (Tracking ID: 3726110) SYMPTOM: On systems with high number of CPUs, DMP devices may perform considerably slower than OS device paths. DESCRIPTION: In high CPU configuration, I/O statistics related functionality in DMP takes more CPU time because DMP statistics are collected on per CPU basis. This stat collection happens in DMP I/O code path hence it reduces the I/O performance. Because of this, DMP devices perform slower than OS device paths. RESOLUTION: The code is modified to remove some of the stats collection functionality from DMP I/O code path. Along with this, the following tunable need to be turned off: 1. Turn off idle lun probing. #vxdmpadm settune dmp_probe_idle_lun=off 2. Turn off statistic gathering functionality. #vxdmpadm iostat stop Notes: 1. Please apply this patch if system configuration has large number of CPU and if DMP performs considerably slower than OS device paths. For normal systems this issue is not applicable. * 3803497 (Tracking ID: 3802750) SYMPTOM: Once VxVM (Veritas Volume Manager) volume I/O-shipping functionality is turned on, it is not getting disabled even after the user issues the correct command to disable it. DESCRIPTION: VxVM (Veritas Volume Manager) volume I/O-shipping functionality is turned off by default. The following two commands can be used to turn it on and off: vxdg -g <dgname> set ioship=on vxdg -g <dgname> set ioship=off The command to turn off I/O-shipping is not working as intended because I/O-shipping flags are not reset properly. RESOLUTION: The code is modified to correctly reset I/O-shipping flags when the user issues the CLI command. * 3851117 (Tracking ID: 3662392) SYMPTOM: In the CVM environment, if I/Os are getting executed on slave node, corruption can happen when the vxdisk resize(1M) command is executing on the master node. DESCRIPTION: During the first stage of resize transaction, the master node re-adjusts the disk offsets and public/private partition device numbers. On a slave node, the public/private partition device numbers are not adjusted properly. Because of this, the partition starting offset is are added twice and causes the corruption. The window is small during which public/private partition device numbers are adjusted. If I/O occurs during this window then only corruption is observed. After the resize operation completes its execution, no further corruption will happen. RESOLUTION: The code has been changed to add partition starting offset properly to an I/O on slave node during execution of a resize command. * 3852148 (Tracking ID: 3852146) SYMPTOM: In a CVM cluster, when importing a shared diskgroup specifying both -c and -o noreonline options, the following error may be returned: VxVM vxdg ERROR V-5-1-10978 Disk group : import failed: Disk for disk group not found. DESCRIPTION: The -c option will update the disk ID and disk group ID on the private region of the disks in the disk group being imported. Such updated information is not yet seen by the slave because the disks have not been re-onlined (given that noreonline option is specified). As a result, the slave cannot identify the disk(s) based on the updated information sent from the master, causing the import to fail with the error Disk for disk group not found. RESOLUTION: The code is modified to handle the working of the "-c" and "-o noreonline" options together. * 3854788 (Tracking ID: 3783356) SYMPTOM: After DMP module fails to load, dmp_idle_vector is not NULL. DESCRIPTION: After DMP module load failure, DMP resources are not cleared off from the system memory, so some of the resources are in NON-NULL value. When system retries to load, it frees invalid data, leading to system panic with error message BAD FREE, because the data being freed is not valid at that point. RESOLUTION: The code is modified to clear up the DMP resources when module failure happens. * 3863971 (Tracking ID: 3736502) SYMPTOM: When FMR is configured in VVR environment, 'vxsnap refresh' fails with below error message: "VxVM VVR vxsnap ERROR V-5-1-10128 DCO experienced IO errors during the operation. Re-run the operation after ensuring that DCO is accessible". Also, multiple messages of connection/disconnection of replication link(rlink) are seen. DESCRIPTION: Inherently triggered rlink connection/disconnection causes the transaction retries. During transaction, memory is allocated for Data Change Object(DCO) maps and is not cleared on abortion of a transaction. This leads to a problem of memory leak and eventually to exhaustion of maps. RESOLUTION: The fix has been added to clear the allocated DCO maps when transaction aborts. * 3871040 (Tracking ID: 3868444) SYMPTOM: Disk header timestamp is updated even if the disk group import fails. DESCRIPTION: While doing dg import operation, during join operation disk header timestamps are updated. This makes difficult for support to understand which disk is having latest config copy if dg import is failed and decision is to be made if force dg import is safe or not. RESOLUTION: Dump the old disk header timestamp and sequence number in the syslog which can be referred on deciding if force dg import would be safe or not * 3874737 (Tracking ID: 3874387) SYMPTOM: Disk header information is not logged to the syslog sometimes even if the disk is missing and dg import fails. DESCRIPTION: In scenarios where disk has config copy enabled and get active disk record, then disk header information was not getting logged even though the disk is missing thereafter dg import fails. RESOLUTION: Dump the disk header information even if the disk record is active and attached to the disk group. * 3875933 (Tracking ID: 3737585) SYMPTOM: Customer encounters following "Uncorrectable write error or below panic in VVR environment: [000D50D0]xmfree+000050 [051221A0]vol_tbmemfree+0000B0 [05122294]vol_memfreesio_start+00001C [05131324]voliod_iohandle+000050 [05131740]voliod_loop+0002D0 [05126438]vol_kernel_thread_init+000024 DESCRIPTION: IOHINT structure allocated from VxFS is also freed by VxFS after IO done from VxVM. IOs to VxVM with VVR needs 2 phases, SRL(Serial Replication Log) write and Data volume write, VxFS gets IO done after SRL write and doesnt wait for Data Volume write completion, so if Data volume write gets started or done after VxFS frees IOHINT, it may cause write IO error or double free panic due to freeing memory wrongly as per corrupted IOHINT info. RESOLUTION: Code changes were done to clone the IOHINT structure before writing to data volume. * 3877637 (Tracking ID: 3878030) SYMPTOM: Enhance VxVM(Veritas Volume Manager) DR(Dynamic Reconfiguration) tool to clean up OS and VxDMP(Veritas Dynamic Multi-Pathing) device trees without user interaction. DESCRIPTION: When users add or remove LUNs, stale entries in OS or VxDMP device trees can prevent VxVM from discovering changed LUNs correctly. It even causes VxVM vxconfigd process core dump under certain conditions, users have to reboot system to let vxconfigd restart again. VxVM has DR tool to help users adding or removing LUNs properly but it requires user inputs during operations. RESOLUTION: Enhancement has been done to VxVM DR tool. It accepts '-o refresh' option to clean up OS and VxDMP device trees without user interaction. * 3879334 (Tracking ID: 3879324) SYMPTOM: VxVM(Veritas Volume Manager) DR(Dynamic Reconfiguration) tool fails to handle busy device problem while LUNs are removed from OS DESCRIPTION: OS devices may still be busy after removing them from OS, it fails 'luxadm - e offline ' operation and leaves staled entries in 'vxdisk list' output like: emc0_65535 auto - - error emc0_65536 auto - - error RESOLUTION: Code changes have been done to address busy devices issue. * 3880573 (Tracking ID: 3886153) SYMPTOM: In a VVR primary-primary configuration, if 'vrstat' command is runing, vradmind core dump may occur with the stack like below: __assert_c99 StatsSession::sessionInitReq StatsSession::processOpReq StatsSession::processOpMsgs RDS::processStatsOpMsg DBMgr::processStatsOpMsg process_message DESCRIPTION: vrstat command initiates StatSession which need to send initilization request to secondary. On Secondary there is assert() to ensure it's secondary that processing the request. In primary-primary configuration it leads to core dump. RESOLUTION: The code changes have been made to fix the issue by returning failure to StatSession initiator. * 3881334 (Tracking ID: 3864063) SYMPTOM: Application I/O hangs after the Master Pause command is issued. DESCRIPTION: Some flags (VOL_RIFLAG_DISCONNECTING or VOL_RIFLAG_REQUEST_PENDING) in VVR (Veritas Volume Replicator) kernel are not cleared because of a race between the Master Pause SIO and the Error Handler SIO. This causes the RU (Replication Update) SIO to fail to proceed, which leads to I/O hang. RESOLUTION: The code is modified to handle the race condition. * 3881335 (Tracking ID: 3867236) SYMPTOM: Application IO hang happens after issuing Master Pause command. DESCRIPTION: The flag VOL_RIFLAG_REQUEST_PENDING in VVR(Veritas Volume Replicator) kernel is not cleared because of a race between Master Pause SIO and RVWRITE1 SIO resulting in RU (Replication Update) SIO to fail to proceed thereby causing IO hang. RESOLUTION: Code changes have been made to handle the race condition. * 3889284 (Tracking ID: 3878153) SYMPTOM: VVR (Veritas Volume Replicator) 'vradmind' deamon core dump in following stack. #0 __kernel_vsyscall () #1 raise () from /lib/libc.so.6 #2 abort () from /lib/libc.so.6 #3 __libc_message () from /lib/libc.so.6 #4 malloc_printerr () from /lib/libc.so.6 #5 _int_free () from /lib/libc.so.6 #6 free () from /lib/libc.so.6 #7 operator delete(void*) () from /usr/lib/libstdc++.so.6 #8 operator delete[](void*) () from /usr/lib/libstdc++.so.6 #9 inIpmHandle::~IpmHandle (this=0x838a1d8, __in_chrg=) at Ipm.C:2946 #10 IpmHandle::events (handlesp=0x838ee80, vlistsp=0x838e5b0, ms=100) at Ipm.C:644 #11 main (argc=1, argv=0xffffd3d4) at srvmd.C:703 DESCRIPTION: Under certain circumstances 'vradmind' daemon may core dump freeing a variable allocated in stack. RESOLUTION: Code change has been done to address the issue. * 3889850 (Tracking ID: 3878911) SYMPTOM: QLogic driver returns following error due to Incorrect aiusize in FC header FC_ELS_MALFORMED, cnt=c60h, size=314h DESCRIPTION: When creating CT pass-through command to be sent, the ct_aiusize we specify in request header does not conform to FT standard. Hence during the sanity check of FT header in OS layer, it reports error and get_topology() failed. RESOLUTION: Code changes have been done so that ct_aiusize is in compliance with FT standard. * 3893134 (Tracking ID: 3864318) SYMPTOM: Memory consuming keeps increasing when reading/writing data against VxVM volume with big block size. DESCRIPTION: In case incoming IO size is too big for a disk to handle, VxVM will split it into smaller ones to move forward. VxVM will allocate memory to backup the those split IOs. Due to code defect, the allocated space doesn't got freed when split IOs are completed. RESOLUTION: The code is modified to free VxVM allocated memory after split IOs competed. * 3894783 (Tracking ID: 3628743) SYMPTOM: On Solaris 11.2, New boot environment takes long time to start up during live upgrade. Here deadlock is seen in ndi_devi_enter( ), when loading VxDMP driver and Deadlocks caused by VXVM drivers due to use of Solaris ddi_pathname_to_dev_t or ddi_hold_devi_by_path private interfaces. DESCRIPTION: Here deadlocks caused by VXVM drivers due to use of Solaris ddi_pathname_to_dev_t or e_ddi_hold_devi_by_path private interface and ddi_pathname_to_dev_t/e_ddi_hold_devi_by_path are Solaris internal use only routine and is not multi-thread safe. Normally this is not a problem as the various VXVM drivers don't unload or detach, however there are certain conditions where our _init routines might be called which can expose this deadlock condition. RESOLUTION: Code is modified to resolve deadlock. * 3897764 (Tracking ID: 3741003) SYMPTOM: In CVM (Cluster Volume Manager) environment, after removing storage from one of multiple plex in a mirrored DCO volume, the DCO volume is detached and DCO object is having BADLOG flag marked. DESCRIPTION: When one plexs storage of a mirrored volume is removed, only that plex should be detached instead of entire volume. While IO reading is undergoing on a failed DCO plex, the local failed IO gets restarted and shiped to other nodes for retry, which also gets failed, since the storage is removed from other nodes as well. Because a flag reset is missing, the failed IO returns error result in entire volume is detached and marked as BADLOG flag even though the IO is successful from an alternate plex. RESOLUTION: Code changes are added to handle this case for the Resiliency of VxVM in Partial-Storage outage scenario. * 3898129 (Tracking ID: 3790136) SYMPTOM: File system hang can be observed sometimes due to IO's hung in DRL. DESCRIPTION: There might be some IO's hung in DRL of mirrored volume due to incorrect calculation of outstanding IO's on volume and number of active IO's which are currently in progress on DRL. The value of the outstanding IO on volume can get modified incorrectly leading to IO's on DRL not to progress further which in turns results in a hang kind of scenario. RESOLUTION: Code changes have been done to avoid incorrect modification of value of outstanding IO's on volume and prevent the hang. * 3898169 (Tracking ID: 3740730) SYMPTOM: While creating volume using vxassist CLI, dco-log length specified as command line parameter was not getting honored. E.g. -> bash # vxassist -g make logtype=dco dcolen= VxVM vxassist ERROR V-5-1-16707 Specified dcologlen() is less than minimum dcologlen(17152) DESCRIPTION: While creating volume, using dcologlength attribute of dco-volume in vxassist CLI, the size of dcolog specified is not correctly parsed in the code, because of which it internally compares the size with incorrectly calculated size & throws the error indicating that size specified isn't sufficient. So the values in comparison was incorrect. Hence changed the code to compare the user-specified value passes the minimum-threshold value or not. RESOLUTION: The code is changed to Fix the issue, which honors the length value of dcolog volume specified by user in vxassist CLI. * 3898175 (Tracking ID: 3748862) SYMPTOM: When vxmpio does not handle a case for busy devices with respect to rootvg and it throws below error. Method error (/usr/lib/methods/ucfgdevice): 0514-062 Cannot perform the requested function because the specified device is busy. DESCRIPTION: vxmpio enable removes the corresponding devices, and if the devices are busy then it throws error. This behavior was designed to perform proper cleanup of ODM entries and requires the applications to stop using the devices. However, in case of rootvg the devices will always be busy since rootvg cannot be stopped. Hence, vxmpio should ignore busy errors. This leaves some stale devices which should be cleaned up after reboot by the startup scripts. RESOLUTION: Code is modified to handle busy errors on rootvg devices. * 3898296 (Tracking ID: 3767531) SYMPTOM: In Layered volume layout with FSS configuration, when few of the FSS_Hosts are rebooted, Full resync is happening for non-affected disks on master. DESCRIPTION: In configuration, where there are multiple FSS-Hosts, with layered volume created on the hosts. When the slave nodes are rebooted , few of the sub-volumes of non-affected disks are fully getting synced on master. RESOLUTION: Code-changes have been made to sync only needed part of sub- volume. * 3902626 (Tracking ID: 3795739) SYMPTOM: In a split brain scenario, cluster formation takes very long time. DESCRIPTION: In a split brain scenario, the surviving nodes in the cluster try to preempt the keys of nodes leaving the cluster. If the keys have been already preempted by one of the surviving nodes, other surviving nodes will receive UNIT Attention. DMP (Dynamic Multipathing) then retries the preempt command after a delayof 1 second if it receives Unit attention. Cluster formation cannot complete untill PGR keys of all the leaving nodes are removed from all the disks. If the number of disks are very large, the preemption of keys takes a lot of time, leading to the very long time for cluster formation. RESOLUTION: The code is modified to avoid adding delay for first couple of retries when reading PGR keys. This allows faster cluster formation with arrays that clear the Unit Attention condition sooner. * 3903647 (Tracking ID: 3868934) SYMPTOM: System panic in the stack like below, while deactivate the VVR(VERITAS Volume Replicator) batch write SIO: panic_trap+000000 vol_cmn_err+000194 vol_rv_inactive+000090 vol_rv_batch_write_start+001378 voliod_iohandle+000050 voliod_loop+0002D0 vol_kernel_thread_init+000024 DESCRIPTION: When VVR do batch write SIO, if it fails to reserve VVR IO memory, the SIO will be put on queue for restart and then will be deactivated. If the deactivation blocked for some time since cannot get the lock, and during this period, the SIO is restarted due to the IO memory reservation request satisfied, the SIO would be corrupted due to be deactivated twice. Hence it causes the system panic. RESOLUTION: Code changes have been made to remove the unnecessary SIO deactivation after VVR IO memory reservation failed. * 3904790 (Tracking ID: 3795788) SYMPTOM: Performance degradation is seen when many application sessions open the same data file on Veritas Volume Manager (VxVM) volume. DESCRIPTION: This issue occurs because of the lock contention. When many application sessions open the same data file on the VxVM volume, the exclusive lock is occupied on all CPUs. If there are a lot of CPUs in the system, this process could be quite time- consuming, which leads to performance degradation at the initial start of applications. RESOLUTION: The code is modified to change the exclusive lock to the shared lock when the data file on the volume is open. * 3904792 (Tracking ID: 3169854) SYMPTOM: On some AIX TL levels, following error messages display when DMP native support is enabled: VxVM vxdmpadm ERROR V-5-1-16951 boot image size exceeding the system limit, trying to recover VxVM vxdmpadm ERROR V-5-1-16952 system recovery successful, but DMP support for LVM bootability could not be enabled It can also stop AIX bootup procedure, displaying below message on the console: PReP-BOOT : Unable to load full PReP image DESCRIPTION: On some AIX TL levels, the default boot image size is large. When DMP native support is enabled, the boot image size exceeds AIX limit of 32MB. As a result, the system cannot boot up. RESOLUTION: The code is modified to significantly decrease DMP component size in AIX boot image when DMP native support is enabled. * 3904796 (Tracking ID: 3853049) SYMPTOM: On a server with more number CPUs, the stats output of vxstat is delayed beyond the set interval. Also multiple sessions of vxstat is impacting the IO performance. DESCRIPTION: The vxstat acquires an exclusive lock on each CPU in order to gather the stats. This would affect the consolidation and display of stats in an environment with huge number of CPUs and disks. The output of stats for interval of 1 second can get delayed beyond the set interval. Also the acquisition of lock happens in the IO path which would affect the IO performance due contention of these locks. RESOLUTION: The code modified to remove the exclusive spin lock. * 3904797 (Tracking ID: 3857120) SYMPTOM: If the volume is shared in a CVM configuration, the following stack traces will be seen under a vxiod daemon suggesting an attempt to drain I/O. In this case, CVM halt will be blocked and eventually time out. The stack trace may appear as: sleep+0x3f0 vxvm_delay+0xe0 volcvm_iodrain_dg+0x150 volcvmdg_abort_complete+0x200 volcvm_abort_sio_start+0x140 voliod_iohandle+0x80 or cv_wait+0x3c() delay_common+0x6c vol_mv_close_check+0x68 vol_close_device+0x1e4 vxioclose+0x24 spec_close+0x14c fop_close+0x8c closef2+0x11c closeall+0x3c proc_exit+0x46c exit+8 post_syscall+0x42c syscall_trap+0x188 Since the vxconfigd would be busy in transaction of trying to close the volume or drain the IO then all the other threads which send a request to vxconfigd will hang. DESCRIPTION: VxVM maintains an I/O count of the in-progress I/O on the volume. When two threads from VxVM asynchronously manipulate the I/O count on the volume, the race between these threads might lead to stale I/O count remaining on the volume even though the volume has actually completed all I/Os . Since there is an invalid pending I/O count on the volume due to the race condition, the volume cannot be closed. RESOLUTION: This issue has been fixed in the VxVM code manipulating the I/O count to avoid the race condition between the two threads. * 3904800 (Tracking ID: 3860503) SYMPTOM: Poor performance of vxassist mirroring is observed compared to using raw dd utility to do mirroring . DESCRIPTION: There is huge lock contention on high end server with large number of cpus, because doing copy on each region needs to obtain some unnecessary cpu locks. RESOLUTION: VxVM code has been changed to decrease the lock contention. * 3904801 (Tracking ID: 3686698) SYMPTOM: vxconfigd was getting hung due to deadlock between two threads DESCRIPTION: Two threads were waiting for same lock causing deadlock between them. This will lead to block all vx commands. untimeout function will not return until pending callback is cancelled (which is set through timeout function) OR pending callback has completed its execution (if it has already started). Therefore locks acquired by callback routine should not be held across call to untimeout routine or deadlock may result. Thread 1: untimeout_generic() untimeout() voldio() volsioctl_real() fop_ioctl() ioctl() syscall_trap32() Thread 2: mutex_vector_enter() voldsio_timeout() callout_list_expire() callout_expire() callout_execute() taskq_thread() thread_start() RESOLUTION: Code changes have been made to call untimeout outside the lock taken by callback handler. * 3904802 (Tracking ID: 3721565) SYMPTOM: vxconfigd hang is seen with below stack. genunix:cv_wait_sig_swap_core genunix:cv_wait_sig_swap genunix:pause unix:syscall_trap32 DESCRIPTION: In FMR environment, write is done on a source volume having space-optimized(SO) snapshot. Memory is acquired first and then ILOCKs are acquired on individual SO volumes for pushed writes. On the other hand, a user write on SO snapshot will first acquire ILOCK and then acquire memory. This causes deadlock. RESOLUTION: Code is modified to resolve deadlock. * 3904804 (Tracking ID: 3486861) SYMPTOM: Primary node panics with below stack when storage is removed while replication is going on with heavy IOs. Stack: oops_end no_context page_fault vol_rv_async_done vol_rv_flush_loghdr_done voliod_iohandle voliod_loop DESCRIPTION: In VVR environment, when write to data volume failson primary node, error handling is initiated. As a part of it, SRL header will be flushed. As primary storage is removed, flushing will fail. Panic will be hit as invalid values will be accessed while logging error message. RESOLUTION: Code is modified to resolve the issue. * 3904805 (Tracking ID: 3788644) SYMPTOM: When DMP (Dynamic Multi-Pathing) native support enabled for Oracle ASM environment, if we constantly adding and removing DMP devices, it will cause error like: /etc/vx/bin/vxdmpraw enable oracle dba 775 emc0_3f84 VxVM vxdmpraw INFO V-5-2-6157 Device enabled : emc0_3f84 Error setting raw device (Invalid argument) DESCRIPTION: There is a limitation (8192) of maximum raw device number N (exclusive) of /dev/raw/rawN. This limitation is defined in boot configuration file. When binding a raw device to a dmpnode, it uses /dev/raw/rawN to bind the dmpnode. The rawN is calculated by one-way incremental process. So even if we unbind the device later on, the "released" rawN number will not be reused in the next binding. When the rawN number is increased to exceed the maximum limitation, the error will be reported. RESOLUTION: Code has been changed to always use the smallest available rawN number instead of calculating by one-way incremental process. * 3904806 (Tracking ID: 3807879) SYMPTOM: Writing the backup EFI GPT disk label during the disk-group flush operation may cause data corruption on volumes in the disk group. The backup label could incorrectly get flushed to the disk public region and overwrite the user data with the backup disk label. DESCRIPTION: For EFI disks initialized under VxVM (Veritas Volume Manager), it is observed that during a disk-group flush operation, vxconfigd (veritas configuration daemon) could stop writing the EFI GPT backup label to the volume public region, thereby causing user data corruption. When this issue happens, the real user data are replaced with the backup EFI disk label RESOLUTION: The code is modified to prevent the writing of the EFI GPT backup label during the VxVM disk-group flush operation. * 3904807 (Tracking ID: 3867145) SYMPTOM: When VVR SRL occupation > 90%, then output the SRL occupation is shown by 10 percent. DESCRIPTION: This is kind of enhancement, to show the SRL Occupation when it's more than 90% is previously shown with 10 percentage gap. Here the enhancement is to show the logs with 1 percentage granularity. RESOLUTION: Changes are done to show the syslog messages wih 1 percent granularity, when SRL is filled > 90%. * 3904810 (Tracking ID: 3871750) SYMPTOM: In parallel VxVM(Veritas Volume Manager) vxstat commands report abnormal disk IO statistic data. Like below: # /usr/sbin/vxstat -g -u k -dv -i 1 -S ...... dm emc0_2480 4294967210 4294962421 -382676k 4294967.38 4294972.17 ...... DESCRIPTION: After VxVM IO statistics was optimized for huge CPUs and disks, there's a race condition when multiple vxstat commands are running to collect disk IO statistic data. It causes disk's latest IO statistic value become smaller than previous one, hence VxVM treates the value overflow so that abnormal large IO statistic value is printed. RESOLUTION: Code changes are done to eliminate such race condition. * 3904811 (Tracking ID: 3875563) SYMPTOM: While dumping the disk header information, human readable timestamp was not converted correctly from corresponding epoch time. DESCRIPTION: When disk group import fails if one of the disk is missing while importing the disk group, it will dump the disk header information the syslog. But, human readable time stamp was not getting converted correctly from corresponding epoch time. RESOLUTION: Code changes done to dump disk header information correctly. * 3904819 (Tracking ID: 3811946) SYMPTOM: When invoking "vxsnap make" command with cachesize option to create space optimized snapshot, the command succeeds but the following error message is displayed in syslog: kernel: VxVM vxio V-5-0-603 I/O failed. Subcache object <subcache-name> does not have a valid sdid allocated by cache object <cache-name>. kernel: VxVM vxio V-5-0-1276 error on Plex <plex-name> while writing volume <volume-name> offset 0 length 2048 DESCRIPTION: When space optimized snapshot is created using "vxsnap make" command along with cachesize option, cache and subcache objects are created by the same command. During the creation of snapshot, I/Os from the volumes may be pushed onto a subcache even though the subcache ID has not yet been allocated. As a result, the I/O fails. RESOLUTION: The code is modified to make sure that I/Os on the subcache are pushed only after the subcache ID has been allocated. * 3904822 (Tracking ID: 3755209) SYMPTOM: The Dynamic Multi-pathing(DMP) device configured in Solaris LDOM guest is disabled when an active controller of an ALUA array is failed. DESCRIPTION: DMP in guest environment monitors cached target port ID of virtual paths in LDOM. If a controller of an ALUA array fails for some reason, active/primary target port ID of an ALUA array will be changed in I/O domain resulting in stale entry in the guest. DMP in the guest wrongly interprets this target port change to mark the path as unavailable. This causes I/O on the path to be failed. As a result the DMP device is disabled in LDOM. RESOLUTION: The code is modified to not use the cached target port IDs for LDOM virtual disks. * 3904824 (Tracking ID: 3795622) SYMPTOM: With Dynamic Multi-Pathing (DMP) Native Support enabled, LVM global_filter is not updated properly in lvm.conf file to reject the newly added paths. DESCRIPTION: With DMP Native Support enabled, when new paths are added to existing LUNs, LVM global_filter is not updated properly in lvm.conf file to reject the newly added paths. This can lead to duplicate PV (physical volumes) found error reported by LVM commands. RESOLUTION: The code is modified to properly update global_filter field in lvm.conf file when new paths are added to existing disks. * 3904825 (Tracking ID: 3859009) SYMPTOM: pvs command will show the duplicate PV messages since global_filter of lvm.conf is not updated after fiber switch or storage controller get rebooted. DESCRIPTION: When fiber switch or storage controller reboot, some paths dev No. may get reused during DDL reconfig cycle, in this case VxDMP(Veritas Dynamic Multi-Pathing) wont treat them as newly added devices. For those devices belong to LVM dmpnode, VxDMP will not trigger lvm.conf update for them. As a result, the global_filter of lvm.conf will not be updated. Hence the issue. RESOLUTION: The code has been changed to update lvm.conf correctly. * 3904833 (Tracking ID: 3729078) SYMPTOM: In VVR environment, the panic may occur after SF(Storage Foundation) patch installation or uninstallation on the secondary site. DESCRIPTION: VXIO Kernel reset invoked by SF patch installation removes all Disk Group objects that have no preserved flag set, because the preserve flag is overlapped with RVG(Replicated Volume Group) logging flag, the RVG object won't be removed, but its rlink object is removed, result of system panic when starting VVR. RESOLUTION: Code changes have been made to fix this issue. * 3904834 (Tracking ID: 3819670) SYMPTOM: When smartmove with 'vxevac' command is run in background by hitting 'ctlr-z' key and 'bg' command, the execution of 'vxevac' is terminated abruptly. DESCRIPTION: As part of "vxevac" command for data movement, VxVM submits the data as a task in the kernel, and use select() primitive on the task file descriptor to wait for task finishing events to arrive. When "ctlr-z" and bg is used to run vxevac in background, the select() returns -1 with errno EINTR. VxVM wrongly interprets it as user termination action and hence vxevac is terminated. Instead of terminating vxevac, the select() should be retried untill task completes. RESOLUTION: The code is modified so that when select() returns with errno EINTR, it checks whether vxevac task is finished. If not, the select() is retried. * 3904851 (Tracking ID: 3804214) SYMPTOM: VxDMP (Dynamic Multi-Pathing) path enable operation fails after the disk label is changed from guest LDOM. Open fails with error 5 (EIO) on the path being enabled. Following error messages can be seen in /var/adm/messages: vxdmp: [ID 808364 kern.notice] NOTICE: VxVM vxdmp V-5-3-0 dmp_open_path: Open failed with 5 for path 237/0x30 vxdmp: [ID 382146 kern.notice] NOTICE: VxVM vxdmp V-5-0-112 [Warn] disabled path 237/0x30 belonging to the dmpnode 307/0x38 due to open failure DESCRIPTION: While a disk is exported to the Solaris LDOM, Solaris OS in the control/IO domain holds NORMAL mode open on the existing partitions of the DMP node. If the disk partitions/label is changed from LDOM such that some of the older partitions are removed, Solaris OS in the control/IO domain does not know about this change and continues to hold NORMAL mode open on those deleted partitions. If a disabled DMP path is enabled in this scenario, the NORMAL mode open the path fails and path enable operation errors out. This can be worked around by detaching and reattaching the disk to the LDOM. Due to a problem in DMP code, the stale NORMAL mode open flag was not being reset even when the DMP disk was detached from the LDOM. This was preventing the DMP path to be enabled even after the DMP disk was detached from the LDOM. RESOLUTION: Code was fixed to reset NORMAL mode open when the DMP disk is detached from the LDOM. With this fix, DMP disk will have to reattached to the LDOM only once after the disk labels change. When the disk is reattached, it will get the correct open mode (NORMAL/NDELAY) on the partitions that exist after label change. * 3904858 (Tracking ID: 3899568) SYMPTOM: "vxdmpadm iostat stop" as per design cannot stop the iostat gathering persistently. To avoid Performance & Memory crunch related issues, it is generally recommended to stop the iostat gathering.There is a requirement to provide such ability to stop/start the iostat gathering persistently in those cases. DESCRIPTION: Today DMP iostat daemon is stopped using - "vxdmpadm iostat stop". but this is not persistent setting. After reboot this would be lost and hence customer needs to also have to put this in init scripts at appropriate place for persistent effect. RESOLUTION: Code is modified to provide a tunable "dmp_compute_iostats" which can start/stop the iostat gathering persistently. Notes: Use following command to start/stop the iostat gathering persistently. # vxdmpadm settune dmp_compute_iostats=on/off. * 3904859 (Tracking ID: 3901633) SYMPTOM: Lots of error messages like the following are reported while performing RVG sync. VxVM VVR vxrsync ERROR V-5-52-2027 getdigest response err [192.168.10.101:/dev/vx/dsk/testdg/v1 <- 192.168.10.105:/dev/vx/dsk/testdg/v1] [[ndigests sent=-1 ndigests received=0]] VxVM VVR vxrsync ERROR V-5-52-2027 getdigest response err [192.168.10.101:/dev/vx/dsk/testdg/v1 <- 192.168.10.105:/dev/vx/dsk/testdg/v1] [[ndigests sent=-2 ndigests received=0]] DESCRIPTION: While performing last volume region read and sync, volume end offset calculation is not correct, which may lead to over volume end read and sync, result in an internal variable became negative number and vxrsync reports error. It can happen if volume size is not multiple of 512KB, plus the last 512KB volume region is partly in use by VxFS. RESOLUTION: Code changes have been done to fix the issue. * 3904861 (Tracking ID: 3904538) SYMPTOM: RV(Replicate Volume) IO hang happens during slave node leave or master node switch. DESCRIPTION: RV IO hang happens because of SRL(Serial Replicate Log) header is updated by RV recovery SIO. After slave node leave or master node switch, RV recovery could be initiated. During RV recovery, all new coming IOs should be quiesced by setting NEED RECOVERY flag on RV to avoid racing. Due to a code defect, this flag is removed by transaction commit, result in conflicting between new IOs and RV recovery SIO. RESOLUTION: Code changes have been made to fix this issue. * 3904863 (Tracking ID: 3851632) SYMPTOM: When you use the localized messages, some VxVM commands fail while mirroring the volume through vxdiskadm. The error message is similar to the following: ? [y, n, q,?] (: y) y /usr/lib/vxvm/voladm.d/bin/disk.repl: test: unknown operator 1 DESCRIPTION: The issue occurs when the output of the vxdisk list command appears in the localized format. When the output is not translated into English language, a mismatch of messages is observed and command fails. RESOLUTION: The code is modified to convert the output of the necessary commands in the scripts into English language before comparing it with the expected output. * 3904864 (Tracking ID: 3769303) SYMPTOM: System pancis when CVM group is brought online with below stack: voldco_acm_pagein voldco_write_pervol_maps_instant voldco_map_update voldco_write_pervol_maps volfmr_copymaps_instant vol_mv_get_attmir vol_subvolume_get_attmir vol_plex_get_attmir vol_mv_fmr_precommit vol_mv_precommit vol_commit_iolock_objects vol_ktrans_commit volconfig_ioctl ns_capable volsioctl_real mntput path_put vfs_fstatat from_kgid_munged read_tsc vols_ioctl vols_compat_ioctl compat_sys_ioctl sysenter_dispatch voldco_get_accumulator DESCRIPTION: In case of layered volumes, when 'vxvol' comamnd is triggered through 'vxrecover' command with '-Z vols(implicit) option, only the volumes passed through CLI are started, the respective top level volumes remain unstarted. As a result, associated DCO volumes also remain unstarted. At this point of time, if any of the plex of sub-volume needs to be attached back, vxrecover will trigger it. With DCO version 30, vxplex command tries to perform some map manipulation as a part of plex-attach transaction. If the DCO volume is not started before plex attach, the in-core DCO contents are improperly loaded and this leads to panic. RESOLUTION: The code is modified to handle the starting of appropriate associated volumes of a layered volume group. * 3905471 (Tracking ID: 3868533) SYMPTOM: IO hang happens when starting replication. VXIO deamon hang with stack like following: vx_cfs_getemap at ffffffffa035e159 [vxfs] vx_get_freeexts_ioctl at ffffffffa0361972 [vxfs] vxportalunlockedkioctl at ffffffffa06ed5ab [vxportal] vxportalkioctl at ffffffffa06ed66d [vxportal] vol_ru_start at ffffffffa0b72366 [vxio] voliod_iohandle at ffffffffa09f0d8d [vxio] voliod_loop at ffffffffa09f0fe9 [vxio] DESCRIPTION: While performing DCM replay in case Smart Move feature is enabled, VxIO kernel needs to issue IOCTL to VxFS kernel to get file system free region. VxFS kernel needs to clone map by issuing IO to VxIO kernel to complete this IOCTL. Just at the time RLINK disconnection happened, so RV is serialized to complete the disconnection. As RV is serialized, all IOs including the clone map IO form VxFS is queued to rv_restartq, hence the deadlock. RESOLUTION: Code changes have been made to handle the dead lock situation. * 3906251 (Tracking ID: 3806909) SYMPTOM: During installation of volume manager installation using CPI in key-less mode, following logs were observed. VxVM vxconfigd DEBUG V-5-1-5736 No BASIC license VxVM vxconfigd ERROR V-5-1-1589 enable failed: License has expired or is not available for operation transactions are disabled. DESCRIPTION: While using CPI for STANDALONE DMP installation in key less mode, volume manager Daemon(vxconfigd) cannot be started due to a modification in a DMP NATIVE license string that is used for license verification and this verification was failing. RESOLUTION: Appropriate code changes are incorporated to resolve the DMP keyless License issue to work with STANDALONE DMP. * 3907017 (Tracking ID: 3877571) SYMPTOM: Disk header is updated even if the dg import operation fails DESCRIPTION: When dg import fails because of the disk failure, importing dg forcefully needs checking the disks having latest configuration copy. But, it is very difficult to decide which disk to choose without disk header update logs. RESOLUTION: Improved the logging to track the disk header changes. * 3907593 (Tracking ID: 3660869) SYMPTOM: Enhance the DRL dirty-ahead logging for sequential write workloads. DESCRIPTION: With the current DRL implementation, when sequential hints are passed by the above FS layer, further regions in the DRL are dirtied to ensure that the write on the DRL is saved when the new IO on the region comes. But with the current design, there is a flaw and the number of IO's on the DRL are similar to the number of IO's on the data volume. Because of the flaw, same region is being dirtied again and again as part of the DRL IO. This can lead to performance hit as well. RESOLUTION: In order to improve the performance, the number of IO's on the DRL are reduced by enhancing the implementation of Dirty-ahead logging with DRL. INSTALLING THE PATCH -------------------- Run the Installer script to automatically install the patch: ----------------------------------------------------------- Please be noted that the installation of this P-Patch will cause downtime. To install the patch perform the following steps on at least one node in the cluster: 1. Copy the patch vm-aix-Patch-6.2.1.400.tar.gz to /tmp 2. Untar vm-aix-Patch-6.2.1.400.tar.gz to /tmp/hf # mkdir /tmp/hf # cd /tmp/hf # gunzip /tmp/vm-aix-Patch-6.2.1.400.tar.gz # tar xf /tmp/vm-aix-Patch-6.2.1.400.tar 3. Copy the latest available 621 CPI hotfix to /tmp/hf 4. Untar latest available 621 CPI hotfix to to /tmp/hf 5. Install the hotfix(Please be noted that the installation of this P-Patch will cause downtime.) To install the patch 6.2.1.400 will also need a CPI hotfix. If do not use the CPI hotfix may failed when upgrade. # pwd /tmp/hf # ./installVRTSvxvm621P4 -require /tmp/hf/CPI_6.2.1_P12.pl [<host1> <host2>...] 6. To bring all the services and modules up execute # ./ installVRTSvxvm621P4 -start -require /tmp/hf/CPI_6.2.1_P12.pl 7. To stop all the services. # ./ installVRTSvxvm621P4 -stop -require /tmp/hf/CPI_6.2.1_P12.pl You can also install this patch together with 6.2.1 maintenance release using Install Bundles 1. Download this patch and extract it to a directory 2. Change to the Veritas InfoScale 6.2.1 directory and invoke the installmr script with -patch_path option where -patch_path should point to the patch directory # ./installmr -patch_path [<path to this patch>] -require /tmp/hf/CPI_6.2.1_P12.pl [<host1> <host2>...] Install the patch manually: -------------------------- If the currently installed VRTSvxvm is below 6.2.1.400 level, upgrade VRTSvxvm to 6.2.1.000 level before installing this patch. AIX maintenance levels and APARs can be downloaded from the IBM web site: http://techsupport.services.ibm.com 1. Since the patch process will configure the new kernel extensions, a) Stop I/Os to all the VxVM volumes. b) Ensure that no VxVM volumes are in use or open or mounted before starting the installation procedure. c) Stop applications using any VxVM volumes. 2. Check whether root support or DMP native support is enabled. If it is enabled, it will be retained after patch upgrade. # vxdmpadm gettune dmp_native_support If the current value is 'on', DMP native support is enabled on this machine. # vxdmpadm native list vgname=rootvg If the output is some list of hdisks, root support is enabled on this machine 3. Proceed with patch installation as mentioned below a. Before applying this VxVM 6.2.1.400 patch, stop the VEA Server's vxsvc process: # /opt/VRTSob/bin/vxsvcctrl stop b. If your system has Veritas Operation Manager(VOM) configured then check whether vxdclid daemon is running, if it is running then stop vxdclid daemon. Command to check the status of vxdclid daemon #/opt/VRTSsfmh/etc/vxdcli.sh status Command to stop the vxdclid daemon #/opt/VRTSsfmh/etc/vxdcli.sh stop c. To apply this patch, use following command: # installp -ag -d ./VRTSvxvm.bff VRTSvxvm d. To apply and commit this patch, use following command: # installp -acg -d ./VRTSvxvm.bff VRTSvxvm NOTE: Please refer installp(1M) man page for clear understanding on APPLY & COMMIT state of the package/patch. e. Reboot the system to complete the patch upgrade. #reboot f. If you have stopped vxdclid daemon before upgrade then re-start vxdclid daemon using following command #/opt/VRTSsfmh/etc/vxdcli.sh start REMOVING THE PATCH ------------------ Run the Uninstaller script to automatically remove the patch: ------------------------------------------------------------ To uninstall the patch perform the following step on at least one node in the cluster: # /opt/VRTS/install/uninstallVRTSvxvm621P4 -require /tmp/hf/CPI_6.2.1_P12.pl [ ...] Remove the patch manually: ------------------------- 1. Check whether root support or DMP native support is enabled or not: # vxdmpadm gettune dmp_native_support If the current value is 'on', DMP native support is enabled on this machine. # vxdmpadm native list vgname=rootvg If the output is some list of hdisks, root support is enabled on this machine If disabled: goto step 3. If enabled: goto step 2. 2. If root support or DMP native support is enabled: a. It is essential to disable DMP native support. Run the following command to disable DMP native support as well as root support # vxdmpadm settune dmp_native_support=off b. If only root support is enabled, run the following command to disable root support # vxdmpadm native disable vgname=rootvg c. Reboot the system # reboot 3. a. Before backing out patch, stop the VEA server's vxsvc process: # /opt/VRTSob/bin/vxsvcctrl stop b. If your system has Veritas Operation Manager(VOM) configured then check whether vxdclid daemon is running, if it is running then stop vxdclid daemon. Command to check the status of vxdclid daemon #/opt/VRTSsfmh/etc/vxdcli.sh status Command to stop the vxdclid daemon #/opt/VRTSsfmh/etc/vxdcli.sh stop c. To reject the patch if it is in "APPLIED" state, use the following command and re-enable DMP support # installp -r VRTSvxvm 6.2.1.400 d. # reboot e. If you have stopped vxdclid daemon before upgrade then re-start vxdclid daemon using following command #/opt/VRTSsfmh/etc/vxdcli.sh start KNOWN ISSUES ------------ * Tracking ID: 3924480 SYMPTOM: After installing the patch using CPI installer, the vxcloudd and vxcloudd-shadow daemons are not starting automatically. WORKAROUND: Run vxinstall after installation which starts both the daemons. SPECIAL INSTRUCTIONS -------------------- NONE OTHERS ------ NONE