* * * READ ME * * *
                * * * Veritas Cluster Server 6.0.3 * * *
                      * * * Public Hot Fix 1 * * *
                         Patch Date: 2013-03-26


This document provides the following information:

   * PATCH NAME
   * OPERATING SYSTEMS SUPPORTED BY THE PATCH
   * PACKAGES AFFECTED BY THE PATCH
   * BASE PRODUCT VERSIONS FOR THE PATCH
   * SUMMARY OF INCIDENTS FIXED BY THE PATCH
   * DETAILS OF INCIDENTS FIXED BY THE PATCH
   * INSTALLATION PRE-REQUISITES
   * INSTALLING THE PATCH
   * REMOVING THE PATCH


PATCH NAME
----------
Veritas Cluster Server 6.0.3 Public Hot Fix 1


OPERATING SYSTEMS SUPPORTED BY THE PATCH
----------------------------------------
SLES11 x86-64


PACKAGES AFFECTED BY THE PATCH
------------------------------
VRTSamf


BASE PRODUCT VERSIONS FOR THE PATCH
-----------------------------------
   * Veritas Cluster Server 6.0.1
   * Veritas Storage Foundation for Oracle RAC 6.0.1
   * Veritas Storage Foundation Cluster File System 6.0.1
   * Veritas Storage Foundation High Availability 6.0.1
   * Symantec VirtualStore 6.0.1


SUMMARY OF INCIDENTS FIXED BY THE PATCH
---------------------------------------
Patch ID: 6.0.300.100
* 3090243 (3090229) AMF driver panics the node when vxconfigd is unresponsive.
* 3097346 (3097342) AMF driver panics the node when AMF is being stopped.


DETAILS OF INCIDENTS FIXED BY THE PATCH
---------------------------------------
This patch fixes the following Symantec incidents:

Patch ID: 6.0.300.100

* 3090243 (Tracking ID: 3090229)

SYMPTOM:
AMF driver panics the node when vxconfigd is unresponsive.

DESCRIPTION:
The libusnp_vxnotify.so library, used for disk group notifications, goes into
an infinite loop when vxconfigd daemon is unresponsive.  This causes AMF to
enter an inconsistent state; as a result, the AMF driver panics the node.

RESOLUTION:
Symantec has modified the AMF driver and libusnp_vxnotify.so
library to address this issue.

* 3097346 (Tracking ID: 3097342)

SYMPTOM:
AMF driver panics the node when AMF is being stopped.

DESCRIPTION:
When AMF driver is being stopped, it stops the IMFD daemon.  The code to
handle this sleeps while holding a lock.  This causes AMF driver to panic
the node.

RESOLUTION:
Symantec has modified the AMF driver to fix this issue.



INSTALLING THE PATCH
--------------------
The VRTSamf-6.0.300.100 patch may be installed either manually (see below)
or using the included installer.

 *  To apply the patch using the installer, enter the commands 
        # cd <hotfix_directory>  && ./installAMF603P1  [ <node1> <node2>... ]
    
    where 
      <hotfix_directory>
                is the directory where you unpacked this hotfix
      <node1>, <node2>, ...
                are the nodes to be patched.  If none are specified, you
                will be prompted to enter them interactively.  All nodes
                must belong to a single cluster.
    
    For information about installer options, run  './installAMF603P1 -help'.
    

 *  To apply the patch manually, perform the steps listed below on each node.
 
 1) Unconfigure AMF:
        # /opt/VRTSamf/bin/amfconfig -Uof
    
    This will disable IMF functionality for all agents.
 
 2) Stop AMF:
        # /etc/init.d/amf stop
 
 3) Uninstall the older version of AMF:
        # rpm -e VRTSamf
 
 4) Install this AMF Patch:
        # rpm -Uvh VRTSamf-6.0.300.100-GA_SLES11.x86_64.rpm
 
 5) Start AMF:
        # /etc/init.d/amf start
 
 6) Install VRTSvcsag 6.0.300.100 (or higher) patch [refer to section ``SPECIAL INSTRUCTIONS'' below].


REMOVING THE PATCH
------------------
1) Unconfigure AMF:
        # /opt/VRTSamf/bin/amfconfig -Uof
    
    This will disable IMF functionality for all agents.

 2) Stop AMF:
        # /etc/init.d/amf stop

 3) Uninstall AMF:
        # rpm -e VRTSamf
    
    NOTE:  This operation will remove the entire VRTSamf package.

 4) To fully revert your systems, install the previous version of VRTSamf from
    original source media and re-enable AMF.


SPECIAL INSTRUCTIONS
--------------------
After this VRTSamf package has been successfully installed, it is recommended to install VRTSvcsag 6.0.300.200 (or higher) package.


OTHERS
------
NONE