Array Support Library (ASL)/Array Policy Module (APM) Details
VRTSHPXP1281024 [Download] - 15 K Sign in if you want to rate this ASL/APM.

 Basic information

Library name: libvxxp1281024
Library version: vm-5.0-rev-1
Package name: VRTSHPXP1281024
Package version: 1.0.0.0
Supported product versions:
  • 5.0MP3
  • 5.0MP1
Embedded in VxVM?: No
Supported platforms:
  • AIX 5.3
TechNote: 290564
Popularity: 320 viewed  5 downloaded
Download size: 15K
Checksum: 558755078
Release date: 2010-12-10 09:36:18

 Supported Arrays and Modes

  • StorageWorks XP128/1024, XP1024, XP128
Supported mode: A/A

 Readme file  [Save As...]

This techfile provides information about the Array Support Library (ASL) for HP XP128/1024 arrays (Active/Active) on Veritas Volume Manager (tm) 5.0MP1 or later for AIX 5.3. For general information about ASLs, refer to TechNote 249446 http://support.veritas.com/docs/249446 Package Name: VRTSHPXP1281024 Package Version: 1.0.0.0 Supported versions of VERITAS Volume Manager (tm): 5.0MP1 and later Supported Arrays: HP XP 128/1024 ASL Installation Instructions 1. At the bottom of this TechFile, click Download Now to download the ASL package. Download the file VRTSHPXP1281024-SF5.0-AxRT-5.3-v1_290564.tar.Z into the /tmp directory and verify the cksum # cksum VRTSHPXP1281024-SF5.0-AxRT-5.3-v1_290564.tar.Z 558755078 15440 VRTSHPXP1281024-SF5.0-AxRT-5.3-v1_290564.tar.Z 2. Before adding any ASL package, make sure VERITAS Volume Manager is installed and enabled (the vxdctl mode command should return "enabled"): # vxdctl mode mode: enabled 3. To install the package, type: # cd /tmp # zcat VRTSHPXP1281024-SF5.0-AxRT-5.3-v1_290564.tar.Z | tar xvf - x VRTSHPXP1281024.bff, 51200 bytes, 100 tape blocks # installp -acX -d ./VRTSHPXP1281024.bff VRTSHPXP1281024 ...... ........ Installation Summary -------------------- Name Level Part Event Result ------------------------------------------------------------------------------- VRTSHPXP1281024 1.0.0.0 USR APPLY SUCCESS VRTSHPXP1281024 1.0.0.0 ROOT APPLY SUCCESS After the package is installed, you must run the vxdctl enable command to claim the disk array as an IBM SANVC Array: # vxdctl enable After running the vxdctl enable command, please verify the if the lslpp lists the ASL. # lslpp -l VRTSHPXP1281024 Fileset Level State Description ---------------------------------------------------------------------------- Path: /usr/lib/objrepos VRTSHPXP1281024 1.0.0.0 COMMITTED VERITAS Array Support Library (1.0) Path: /etc/objrepos VRTSHPXP1281024 1.0.0.0 COMMITTED VERITAS Array Support Library (1.0) Now you should see libvxxp1281024.so in the output of the vxddladm listsupport command: # vxddladm listsupport libname=libvxxp1281024.so ATTR_NAME ATTR_VALUE ======================================================================= LIBNAME libvxxp1281024.so VID HP ARRAY_TYPE A/A ARRAY_NAME XP128, XP1024

Read and accept Terms of Service