Array Support Library (ASL)/Array Policy Module (APM) Details
VRTSFJTSYe6k [Download] - 13 K Sign in if you want to rate this ASL/APM.

 Basic information

Library name: libvxfjtsye6k
Library version: N/A
Package name: VRTSFJTSYe6k
Package version: 5.0.0.1000
Supported product versions:
  • 5.0MP1
Embedded in VxVM?: No
Supported platforms:
  • AIX (5.2, 5.3)
TechNote: 301996
Popularity: 335 viewed  3 downloaded
Download size: 13K
Checksum: 2648835729
Release date: N/A

 Supported Arrays and Modes

  • ETERNUS6000 Model 1000, ETERNUS6000 Model 1100, ETERNUS6000 Model 400, ETERNUS6000 Model 500, ETERNUS6000 Model 600, ETERNUS6000 Model 700, ETERNUS6000 Model 800, ETERNUS6000 Model 900, ETERNUS6000 series
Supported mode: A/A

 Readme file  [Save As...]

This TechFile provides information about the Array Support Library (ASL) for FUJITSU ETERNUS6000 Series arrays on VERITAS Volume Manager 5.0 MP1 and later for AIX. For general information about ASLs, see TechNote 249446 (link in the Related Documents section of this TechFile) Package Name: VRTSFJTSYe6k Package Version: vm-5.0-rev-1 Supported versions of VERITAS Volume Manager (tm): 5.0 MP1 and later Supported Arrays: Fujitsu ETERNUS6000 Series (Active/Active) At the bottom of this TechFile, click on Download Now to download the ASL package VRTSFJTSYe6k_v1_AIX_50_301996.tar.Z into the /tmp directory Note: If you are downloading the file on a Windows based system, an automatic file extension name change occurs for the ASL package. Therefore, you must execute the download as follows: 1. When presented with the option to save the file, save it as file type "All files." 2. In the file naming box, ensure that the file name exactly matches the file name as shown in this TechFile 3. Select OK Before adding any ASL package, ensure VERITAS Volume Manager is installed and enabled: # vxdctl mode mode: enabled To install the package: # cd /tmp # zcat VRTSFJTSYe6k_v1_AIX_50_301996.tar.Z | tar xvf - # installp -acX -d ./VRTSFJTSYe6k.bff VRTSFJTSYe6k After the package is installed, you must run the vxdctl enable command to claim the disk array as a FUJITSU array: # vxdctl enable After running vxdctl enable, you should see libvxfjtsye6k.so in the output of the vxddladm listsupport command: # vxddladm listsupport libname=libvxfjtsye6k.so ATTR_NAME ATTR_VALUE ======================================================================= LIBNAME libvxfjtsye6k.so VID FUJITSU PID E6000 ARRAY_TYPE A/A ARRAY_NAME FJ_E6000 Software Product Information: # lslpp -l VRTSFJTSYe6k Fileset Level State Description --------------------------------------------------------------------------------------------------------------------- Path: /usr/lib/objrepos VRTSFJTSYe6k 5.0.0.1000 COMMITTED Fujitsu ETERNUS6000 Series Array Support Library for Volume Manager 5.X (5.0-rev-1) Path: /etc/objrepos VRTSFJTSYe6k 5.0.0.1000 COMMITTED Fujitsu ETERNUS6000 Series Array Support Library for Volume Manager 5.X (5.0-rev-1)

Read and accept Terms of Service