Array Support Library (ASL)/Array Policy Module (APM) Details
VRTSFJTSYe2k [Download] - 7 K Sign in if you want to rate this ASL/APM.

 Basic information

Library name: libvxfjtsye2k
Library version: vm-5.0-rev-2
Package name: VRTSFJTSYe2k
Package description: Array Support Library for Fujitsu ETERNUS DX60/DX80 and ETERNUS2000
Package version: 5.0.0.2000
Supported product versions:
  • 5.0MP1
  • 5.0
Embedded in VxVM?: No
Supported platforms:
  • AIX (5.2, 5.3)
TechNote: 323776
Popularity: 364 viewed  3 downloaded
Download size: 7K
Checksum: 1516174035
Release date: N/A

 Supported Arrays and Modes

  • ETERNUS DX60, ETERNUS DX60/DX80/DX90, ETERNUS DX80, ETERNUS DX90, ETERNUS2000 Model 100, ETERNUS2000 Model 200, ETERNUS2000 Model 50, ETERNUS2000 series
Supported mode: A/A

 Readme file  [Save As...]

This TechFile provides information about the array support library (ASL) for Fujitsu ETERNUS DX60/DX80/DX90 and ETERNUS2000 Arrays (Active/Active) on Veritas Volume Manager (tm) 5.0 and 5.0MPx for AIX. For general information about ASLs, refer to TechNote 249446 (link in the Related Documents section below). Package Name: VRTSFJTSYe2k Package Description: Array Support Library for Fujitsu ETERNUS DX60/DX80 and ETERNUS2000 Package Version: 5.0.0.2000 Supported versions of Veritas Volume Manager: 5.0, 5.0MP1, 5.0MP3 Supported Arrays: Fujitsu ETERNUS DX60/DX80/DX90 and ETERNUS2000 Arrays (Active/Active) Installation Instructions: Note: If the previous version of this ASL is installed in your system, please uninstall it before installing this version. 1. Create a directory to download the ASL # mkdir /tmp/asl # cd /tmp/asl 2. At the bottom of this TechFile, click on Download Now to download the ASL package 3. After downloading VRTSFJTSYe2k_v2_AIX_50.tar_323776.gz, verify checksum of the file as follows: # cksum VRTSFJTSYe2k_v2_AIX_50.tar_323776.gz 1516174035 7040 VRTSFJTSYe2k_v2_AIX_50.tar_323776.gz 4. Decompress the file and extract the package: # gunzip VRTSFJTSYe2k_v2_AIX_50.tar_323776.gz # tar xvf VRTSFJTSYe2k_v2_AIX_50.tar_323776 5. Before adding any ASL package, ensure Veritas Volume Manager is installed and enabled # vxdctl mode mode: enabled 6. ASL Installation: # installp -acX -d . VRTSFJTSYe2k 7. After the package is installed, you must run the vxdctl enable command to claim the disk array as a Fujitsu array # vxdctl enable Note: In some cases, it has been reported that the installation of the ASL does not take effect, and the vxdctl enable command does not claim the enclosure and devices. In such cases, you can execute the vxconfigd -k command in addition to vxdctl enable. 8. After running vxdctl enable, run the vxddladm listsupport and vxddladm listversion command and verify the output as follows: # vxddladm listsupport libname=libvxfjtsye2k.so ATTR_NAME ATTR_VALUE ======================================================================= LIBNAME libvxfjtsye2k.so VID FUJITSU PID E2000, ETERNUS_DXL ARRAY_TYPE A/A ARRAY_NAME FJ_E2000, FJ_DXL # vxddladm listversion libname=libvxfjtsye2k.so libvxfjtsye2k.so has version string: vm-5.0-rev-2. VXVM version: 5.0 Package Information: # lslpp -l VRTSFJTSYe2k Fileset Level State Description ---------------------------------------------------------------------------- Path: /usr/lib/objrepos VRTSFJTSYe2k 5.0.0.2000 COMMITTED Array Support Library for Fujitsu ETERNUS DX60/DX80 and ETERNUS2000 Path: /etc/objrepos VRTSFJTSYe2k 5.0.0.2000 COMMITTED Array Support Library for Fujitsu ETERNUS DX60/DX80 and ETERNUS2000

Read and accept Terms of Service