| Array Support Library (ASL)/Array Policy Module (APM) Details | |
|---|---|
| VRTSFJTSYe8k [Download] - 8 K | Sign in if you want to rate this ASL/APM. |
Basic information
| Library name: | libvxFJTSYe8k |
| Library version: | vm-5.0-rev-3 |
| Package name: | VRTSFJTSYe8k |
| Package description: | Array Support Library for Fujitsu ETERNUS DX8000/DX400 and ETERNUS8000/4000 |
| Package version: | 3.0 |
| Supported product versions: |
|
| Embedded in VxVM?: | No |
| Supported platforms: |
|
| TechNote: | 338461 |
| Popularity: | 613 viewed 19 downloaded |
| Download size: | 8K |
| Checksum: | 3748360885 |
| Release date: | N/A |
Supported Arrays and Modes
Supported mode:
A/A
|
Readme file [Save As...]
This TechFile provides information about the array support library for Fujitsu ETERNUS4000, ETERNUS8000, ETERNUS DX400 and ETERNUS DX8000 series arrays (Active/Active) on Veritas Volume Manager (tm) 5.0 and 5.0MPx for AIX For general information about ASLs, see TechNote 249446 (link in the Related Documents section of this TechFile) Package Name: VRTSFJTSYe8k Package Version: 3.0 Package Description: Array Support Library for Fujitsu ETERNUS DX8000/DX400 and ETERNUS8000/4000 Supported versions of Veritas Volume Manager : 5.0, 5.0 MP1, 5.0 MP1 RU1, 5.0 MP3 Supported Arrays: Fujitsu ETERNUS4000 Series, Fujitsu ETERNUS8000 Series, Fujitsu ETERNUS DX400 Series, Fujitsu ETERNUS DX8000 Series Supported Mode: A/A (Active/Active) Installation Instructions: 1. Create a directory to store ASL package # mkdir /tmp/Fujitsu_asl # cd /tmp/Fujitsu_asl 2. At the bottom of this TechFile, click on Download Now to download the ASL package 3. After downloading VRTSFJTSYe8k_asl_5.0_3.0_AIX.tar_338461.gz, verify the checksum # cksum VRTSFJTSYe8k_asl_5.0_3.0_AIX.tar_338461.gz 3748360885 8234 VRTSFJTSYe8k_asl_5.0_3.0_AIX.tar_338461.gz 4. Uncompress the file and extract the package # gunzip VRTSFJTSYe8k_asl_5.0_3.0_AIX.tar_338461.gz # tar -xvf VRTSFJTSYe8k_asl_5.0_3.0_AIX.tar_338461 5. Before installing the ASL package, make sure VERITAS Volume Manager is installed and enabled # vxdctl mode mode: enabled 6. ASL Installation # installp -acgX -d VRTSFJTSYe8k.bff VRTSFJTSYe8k 7. After the package is installed, run the vxdctl enable command to claim the disk array # vxdctl enable Note: In some cases, it has been reported that the installation of the ASL does not take effect, and vxdctl enable does not claim the enclosure and devices. In such cases, you can execute the vxconfigd -k command in addition to vxdctl enable 8. After executing vxdctl enable, verify the output of the vxddladm listsupport command # vxddladm listsupport libname=libvxFJTSYe8k.so ATTR_NAME ATTR_VALUE =============================== LIBNAME libvxFJTSYe8k.so VID FUJITSU PID E4000, E8000, ETERNUS_DX400 ETERNUS_DX8000 ARRAY_TYPE A/A ARRAY_NAME FJ_E4000, FJ_E8000, FJ_DX400 FJ_DX8000 9. Verify the ASL library version # vxddladm listversion libname=libvxFJTSYe8k.so libvxFJTSYe8k.so has version string: vm-5.0-rev-3.VXVM version: 5.0 ASL Package Information: # lslpp -l VRTSFJTSYe8k Fileset Level State Description ------------------------------------------------------ Path: /usr/lib/objrepos VRTSFJTSYe8k 5.0.0.2000 COMMITTED Array Support Library for Fujitsu ETERNUS DX8000/DX400 and ETERNUS8000/4000 Path: /etc/objrepos VRTSFJTSYe8k 5.0.0.2000 COMMITTED Array Support Library for Fujitsu ETERNUS DX8000/DX400 and ETERNUS8000/4000
