Array Support Library (ASL)/Array Policy Module (APM) Details
VRTSSTKasl [Download] - 13 K Sign in if you want to rate this ASL/APM.

 Basic information

Library name: libstkasl
Library version: N/A
Package name: VRTSSTKasl
Package description: StorageTek FlexLine Array Support Library for Volume Manager 5.0 and Later
Package version: 1.0,REV=04.30.2008.15.58
Supported product versions:
  • 5.0MP1
  • 5.0
Embedded in VxVM?: No
Supported platforms:
  • Solaris (SPARC 8, SPARC 9, SPARC 10)
TechNote: 304738
Popularity: 292 viewed  14 downloaded
Download size: 13K
Checksum: 1672930306
Release date: N/A

 Supported Arrays and Modes

  • FlexLine 200/300 series, FlexLine FLX280, FlexLine FLX380
Supported mode: A/P-C

 Readme file  [Save As...]

This TechFile provides information about the Array Support Library (ASL) for StorageTek FlexLine (FLX) Series arrays (formerly known as OpenStorage and BladeStor) on Veritas Volume Manager 5.0 and later for Solaris Sparc For general information about Array Support Libraries (ASLs), see TechNote 249446 (link in the Related Documents section of this TechFile) Array Settings: Arrays should be configured to Auto-Trespass (AVT Mode). For additional details on array configuration, contact StorageTek Support. Package Name: VRTSSTKasl (StorageTek FlexLine Array Support Library for Volume Manager 5.0 and Later) Package Version: 1.0,REV=04.30.2008.15.58 Supported versions of Veritas Volume Manager: 5.0, 5.0 MP1 Supported Arrays: FlexLine 200, 300 and 380 Series (A/P-C) Installation Instructions: 1. Create a directory to store ASL package # mkdir /tmp/asl 2. At the bottom of this TechFile, click on Download Now to download the package 3. Download the file VRTSSTKasl_5.0_SunOS_sparc_v1.2_304738.tar.Z into /tmp/asl directory 4. Before adding any ASL package, ensure Veritas Volume Manager is installed and enabled # vxdctl mode mode: enabled 5. To install the package: # cd /tmp/asl # zcat VRTSSTKasl_5.0_SunOS_sparc_v1.2_304738.tar.Z | tar xvf - # pkgadd -d . VRTSSTKasl After the package is installed, you must run the vxdctl enable command to claim the disk array as a STK FlexLine array # vxdctl enable After running the vxdctl enable command, you should see libstkasl.so in the output of the vxddladm listsupport command # vxddladm listsupport libname=libstkasl.so ATTR_NAME ATTR_VALUE ======================================================================= LIBNAME libstkasl.so VID STK PID OPENstorage, BladeCtlr, FLEXLINE ARRAY_TYPE A/P-C ARRAY_NAME STK_ARRAY, STK_ARRAY, FLEXLINE Package Information: # pkginfo -l VRTSSTKasl PKGINST: VRTSSTKasl NAME: OpenStorage and BladeController/FlexLine Array Support Librarry CATEGORY: system ARCH: sparc VERSION: 1.0,REV=04.30.2008.15.58 BASEDIR: /etc/vx VENDOR: VERITAS Software DESC: Array Support library for OpenStorage & BladeController/FlexLine Array. PSTAMP: VERSION-1.0:30-April-2008 INSTDATE: Jun 12 2008 11:29 HOTLINE: 800-342-0652 EMAIL: support@veritas.com STATUS: completely installed FILES: 5 installed pathnames 3 shared pathnames 3 directories 2 executables 33 blocks used (approx)

Read and accept Terms of Service