Array Support Library (ASL)/Array Policy Module (APM) Details
VRTSHILLsannet2 [Download] - 10 K Sign in if you want to rate this ASL/APM.

 Basic information

Library name: libvxhillsannet2
Library version: vm-5.0-rev-1
Package name: VRTSHILLsannet2
Package version: 5.0,REV=1.0_2007.05.23.22.25
Supported product versions:
  • 5.0MP3
  • 5.0MP1
  • 5.0
Embedded in VxVM?: No
Supported platforms:
  • Solaris (SPARC 8, SPARC 9, SPARC 10)
TechNote: 288830
Popularity: 625 viewed  3 downloaded
Download size: 10K
Checksum: 1209309104
Release date: N/A

 Supported Arrays and Modes

  • SANnet II FC
Supported mode: A/A

 Readme file  [Save As...]

Symantec Enabled Arrays - Array Support Library for Dot Hill SANnet II (Active/Active) Arrays on Veritas Volume Manager (tm) 5.0 and later for Solaris This Solution provides information about the Array Support Library (ASL) for Dot Hill SANnet II arrays. For general information about ASLs, refer to TechNote 249446 ( link in the Related Documents section below) Package Name: VRTSHILLsannet2 Package Version: 5.0,REV=1.0_2007.05.23.22.25 Supported versions of VERITAS Volume Manager (tm): 5.0 and later Supported arrays: Dot Hill SANnet II FC, SANnet II SCSI, SANnet II SATA, SANnet II U320 (Active/Active) At the bottom of this TechFile, click Download Now to download the ASL package VRTSHILLsannet2_v1_SunOS_50_288830.tar.Z Before adding any ASL package, make sure Veritas Volume Manager is installed and enabled (the vxdctl mode command should return "enabled"): # vxdctl mode mode: enabled Note: If installing on Solaris 9, set the LD_LIBRARY_PATH to /usr/lib. Refer to TechNote 251706 for complete information (link in the Related Documents section below). After downloading VRTSHILLsannet2_v1_SunOS_50_288830.tar.Z , uncompress and extract the package: # cd /tmp # zcat VRTSHILLsannet2_v1_SunOS_50_288830.tar.Z | tar xvf - # pkgadd -d ./ After the package is installed, run the vxdctl enable command to claim the disk array as a DotHill array: # vxdctl enable After running vxdctl enable, you will see libvxhillsannet2.so in the output of vxddladm listsupport: # vxddladm listsupport libname=libvxhillsannet2.so ATTR_NAME ATTR_VALUE ======================================================================= LIBNAME libvxhillsannet2.so VID DotHill PID SANnet II FC, SANnet II SCSI, SANnet II SATA SANnet II U320 ARRAY_TYPE A/A ARRAY_NAME SANnetIIFC, SANnetIISCSI, SANnetIISATA SANnetIIU320 # vxddladm listversion libname=libvxhillsannet2.so LIB_NAME ASL_VERSION Min. VXVM version =================================================================== libvxhillsannet2.so vm-5.0-rev-1 5.0 For additional information about ASLs, refer to Installing an Array Support Library (ASL) Guide, TechNote 249325 (link in the Related Documents section of this TechFile). Package Information: PKGINST: VRTSHILLsannet2 NAME: Dot Hill SANnet II FC, SANnet II SATA Array Support Library for Volume Manager 5.X CATEGORY: system ARCH: sparc VERSION: 5.0,REV=1.0_2007.05.23.22.25 BASEDIR: /etc/vx VENDOR: VERITAS Software DESC: Dot Hill SANnet II FC, SANnet II SATA Array Support Library for Volume Manager 5.X PSTAMP: VERSION-5.0:23-May-2007 INSTDATE: May 28 2007 16:30 HOTLINE: 800-342-0652 EMAIL: support@veritas.com STATUS: completely installed FILES: 5 installed pathnames 3 shared pathnames 3 directories 2 executables 22 blocks used (approx)