SORT

Veritas™ Services and Operations Readiness Tools (SORT)

 Array Support Library (ASL)/Array Policy Module (APM) Details
VRTSFSC-FibreCAT-ASL [Download] - 6 K Sign in if you want to rate this ASL/APM.

 Basic information

Library name: libvxfsc
Library version: vm-5.0-rev-2
Package name: VRTSFSC-FibreCAT-ASL
Package description: Array Support library for FSC FibreCAT series Arrays
Package version: 1.0,REV=01.27.2009.03.51
Supported product versions:
  • 5.0MP3
  • 5.0MP1
  • 5.0
Embedded in VxVM?: No
Supported platforms:
  • Solaris (SPARC 8, SPARC 9, SPARC 10)
TechNote: 308894
Popularity: 820 viewed  19 downloaded
Download size: 6K
Checksum: 340502336
Release date: N/A

 Supported Arrays and Modes

  • FibreCAT SX100, FibreCAT SX80, FibreCAT SX80/100 series
Supported mode: A/A

 Readme file  [Save As...] 

This TechFile provides information about the Array Support Library (ASL) for FSC FibreCAT SX80/SX100 Series Arrays on Veritas Volume Manager 5.0 and later for Solaris Sparc.
For general information about ASLs, see TechNote 249446 (link in the Related Documents section of this TechFile)
ASL Package Name:  VRTSFSC-FibreCAT-ASL
Package Version: 1.0,REV=01.27.2009.03.51
Supported versions of Veritas Volume Manager: 5.0, 5.0MP1, 5.0MP3
Supported Arrays: FSC FibreCAT SX80/SX100 Series Arrays (Active/Active)

Installation Instructions:
1. Create a directory in which the ASL package would be downloaded
# mkdir /tmp/FSC_ASL
# cd /tmp/FSC_ASL

2. At the bottom of this TechFile, click on Download Now to download the package

2. After downloading , verify checksum of the file
# cksum VRTSFSC-FibreCAT_asl-1.0_SunOS_vm5.0.tar_308894.gz
340502336 6520 VRTSFSC-FibreCAT_asl-1.0_SunOS_vm5.0.tar_308894.gz

3. Uncompress the file
# gunzip VRTSFSC-FibreCAT_asl-1.0_SunOS_vm5.0.tar_308894.gz
# tar xvf VRTSFSC-FibreCAT_asl-1.0_SunOS_vm5.0.tar_308894

4. Before adding any ASL package, ensure Veritas Volume Manager is installed and enabled
# vxdctl mode
mode: enabled

5. Install the ASL
# pkgadd -d . VRTSFSC-FibreCAT-ASL

6. After the package is installed, execute vxdctl enable command to claim the disk array as FSC-FibreCAT
#  vxdctl enable
Note: In some cases, it has been reported that the installation of the ASL and/or APM does not take effect, and vxdctl enable does not claim the enclosure and devices. In such cases, you can execute vxconfigd -k command in addition to vxdctl enable.

7. After executing vxdctl enable, verify output of vxddladm listsupport command
# vxddladm listsupport libname=libvxfsc.so
ATTR_NAME           ATTR_VALUE
=================================================================================================
LIBNAME             libvxfsc.so
VID                 FSC
PID                 FibreCAT_SX1, FibreCAT_SX100
ARRAY_TYPE          A/A
ARRAY_NAME          FSC-FibreCAT

8. Verify the output of vxddladm listversion command
# vxddladm listversion libname=libvxfsc.so
libvxfsc.so has version string: vm-5.0-rev-2. VXVM version: 5.0

Package Information:
# pkginfo -l VRTSFSC-FibreCAT-ASL
  PKGINST:  VRTSFSC-FibreCAT-ASL
     NAME:  Array Support Library for FSC FibreCAT series Arrays
 CATEGORY:  system
     ARCH:  sparc
  VERSION:  1.0,REV=01.27.2009.03.51
  BASEDIR:  /etc/vx
   VENDOR:  VERITAS Software
     DESC:  Array Support library for FSC FibreCAT series Arrays
   PSTAMP:  VERSION-1.0:17-September-2008
 INSTDATE:  Jan 30 2009 00:06
  HOTLINE:  800-342-0652
    EMAIL:  support@veritas.com
   STATUS:  completely installed
    FILES:        5 installed pathnames
                  3 shared pathnames
                  3 directories
                  2 executables
                 21 blocks used (approx)