Array Support Library (ASL)/Array Policy Module (APM) Details
VRTSFJTSYe3k4ka [Download] - 7 K Sign in if you want to rate this ASL/APM.

 Basic information

Library name: libvxFJTSYe3k4ka
Library version: vm-5.0-rev-1
Package name: VRTSFJTSYe3k4ka
Package description: Array Support Library for FUJITSU E3000/E400A
Package version: 1.0
Supported product versions:
  • 5.0MP3
Embedded in VxVM?: No
Supported platforms:
  • AIX (5.2, 5.3, 6.1)
TechNote: 355886
Popularity: 267 viewed  3 downloaded
Download size: 7K
Checksum: 3909457106
Release date: N/A

 Supported Arrays and Modes

  • ETERNUS3000 Model 100, ETERNUS3000 Model 200, ETERNUS3000 Model 300, ETERNUS3000 Model 400, ETERNUS3000 Model 50, ETERNUS3000 Model 500, ETERNUS3000 Model 600, ETERNUS3000 Model 700, ETERNUS3000 Model 80, ETERNUS3000 series, ETERNUS4000 Model 100, ETERNUS4000 Model 80
Supported mode: A/PG

 Readme file  [Save As...]

Problem Symantec Enabled Arrays - Array Support Library for Fujitsu ETERNUS3000 and ETERNUS4000 Model 80/100 Arrays (Active/Passive-Group) on Veritas Volume Manager (tm) 5.0MPx for AIX Solution This TechFile provides information about the array support library for Fujitsu ETERNUS3000 and ETERNUS4000 Model 80/100 arrays (Active/Passive-Group) on Veritas Volume Manager (tm) 5.0MPx for AIX For general information about ASLs, see TechNote 249446 (link in the Related Documents section of this TechFile) Package Name: VRTSFJTSYe3k4ka Package Version: 1.0 Package Description: Array Support Library for FUJITSU E3000/E400A Supported versions of Veritas Volume Manager : 5.0MP3 NOTE: Veritas Volume Manager version of 5.0MP3RP3HF7 or higher is needed for this array support. Supported Arrays: Fujitsu ETERNUS3000 and ETERNUS4000 Model 80/100 Supported Mode: A/P-G (Active/Passive-Group) Installation Instructions: 1. Create a directory to store ASL package # mkdir /tmp/Fujitsu_asl # cd /tmp/Fujitsu_asl 2. At the bottom of this TechFile, click on Download Now to download the ASL package VRTSFJTSYe3k4ka_asl_5.0_1.0_AIX.tar_355886.gz 3. After downloading VRTSFJTSYe3k4ka_asl_5.0_1.0_AIX.tar_355886.gz, verify the checksum # cksum VRTSFJTSYe3k4ka_asl_5.0_1.0_AIX.tar_355886.gz 3909457106 7563 VRTSFJTSYe3k4ka_asl_5.0_1.0_AIX.tar_355886.gz 4. Uncompress the file and extract the package # gunzip VRTSFJTSYe3k4ka_asl_5.0_1.0_AIX.tar_355886.gz # tar -xvf VRTSFJTSYe3k4ka_asl_5.0_1.0_AIX.tar_355886 5. Before installing the ASL package, make sure VERITAS Volume Manager is installed and enabled # vxdctl mode mode: enabled 6. ASL Installation # installp -acgX -d VRTSFJTSYe3k4ka.bff VRTSFJTSYe3k4ka 7. After the package is installed, run the vxdctl enable command to claim the disk array # vxdctl enable Note: In some cases, it has been reported that the installation of the ASL does not take effect, and vxdctl enable does not claim the enclosure and devices. In such cases, you can execute the vxconfigd -k command in addition to vxdctl enable 8. After executing vxdctl enable, verify the output of the vxddladm listsupport command # vxddladm listsupport libname=libvxFJTSYe3k4ka.so ATTR_NAME ATTR_VALUE ================================================================================================= LIBNAME libvxFJTSYe3k4ka.so VID FUJITSU PID E3000, E400A ARRAY_TYPE A/PG ARRAY_NAME FJ_E3000, FJ_E400A 9. Verify the ASL library version # vxddladm listversion libname=libvxFJTSYe3k4ka.so libvxFJTSYe3k4ka.so has version string: vm-5.0-rev-1. VXVM version: 5.0 ASL Package Information: # lslpp -l VRTSFJTSYe3k4ka Fileset Level State Description ---------------------------------------------------------------------------- Path: /usr/lib/objrepos VRTSFJTSYe3k4ka 5.0.0.0 COMMITTED Array Support Library for FUJITSU E3000/E400A Path: /etc/objrepos VRTSFJTSYe3k4ka 5.0.0.0 COMMITTED Array Support Library for FUJITSU E3000/E400A

Read and accept Terms of Service