Array Support Library (ASL)/Array Policy Module (APM) Details
VRTSNTAPasl [Download] - 492 K Sign in if you want to rate this ASL/APM.

 Basic information

Library name: libvxnetapp
Library version: vm-5.0-rev-3
Package name: VRTSNTAPasl
Package version: 2.0
Supported product versions:
  • 5.0.1
Embedded in VxVM?: No
Supported platforms:
  • HP-UX 11i v3 (11.31)
Popularity: 265 viewed  27 downloaded
Download size: 492K
Checksum: 1527215828
Release date: 2011-03-15 09:41:57

 Supported Arrays and Modes

  • FAS2000/FAS900/FAS200 series, FAS250, FAS270, FAS270c, FAS3000/V3000 series, FAS3020, FAS3020c, FAS3040, FAS3050, FAS3070, FAS3100/V3100 series, FAS3140, FAS3160, FAS3170, FAS6000/V6000 series, FAS6030, FAS6070, FAS920c, FAS940c, FAS960c, FAS980c, V3020, V3040, V3070, V3140, V3160, V3170, V6030, V6070
Supported mode: A/A-NETAPP, A/P-NETAPP, ALUA

 Readme file  [Save As...]

This README provides information about Array Support Library (ASL) for NetApp Storage Systems (ALUA) on Veritas Volume Manager (tm) 5.0.1 and later for HP-UX 11iv3 ASL Package Name: VRTSNTAPasl ASL Package Version: vm-5.0-rev-3 Supported versions of Veritas Volume Manager: 5.0.1 and later Supported Arrays: NetApp Storage Systems (ALUA) and IBM System Storage N Series (ALUA) Supported Modes: ALUA Change Log: ----------- - Added support for Thin Provisioning, see below for required VxVM patch level. Note: ----- - For Thin provisioning support you need to be at "VxVM 5.0.1 RP2 HF1" or higher. Installation Instructions: -------------------------- 1. Create a directory to store NetApp ASL package: # mkdir /tmp/NTAP_ASL # cd /tmp/NTAP_ASL 2. Download the ASL tar package in to /tmp/NTAP_ASL 3. After downloading VRTSNTAPasl_HP_1131_5.0.1_v3.tar.gz in /tmp/NTAP_ASL/ directory, verify checksum of file # cksum VRTSNTAPasl_HP_1131_5.0.1_v3.tar.gz 1527215828 504162 VRTSNTAPasl_HP_1131_5.0.1_v3.tar.gz 4. Uncompress the file and extract the ASL package # gunzip VRTSNTAPasl_HP_1131_5.0.1_v3.tar.gz # tar xvf VRTSNTAPasl_HP_1131_5.0.1_v3.tar 5. Before adding ASL package, ensure Veritas Volume Manager is installed and enabled: # vxdctl mode mode: enabled 6. Install the ASL: # swinstall -s `pwd` VRTSNTAPasl 7. After package is installed, execute the "vxdctl enable" command to claim the disk array as NetApp array: # vxdctl enable Note: In some cases, it has been reported that the installation of the ASL and/or APM does not take effect, and "vxdctl enable" does not claim the enclosure and devices. In such cases, you can execute the "vxconfigd -k -m enable" command in addition to "vxdctl enable". 8. After executing "vxdctl enable", verify the output of the "vxddladm listsupport" command: # vxddladm listsupport ATTR_NAME ATTR_VALUE ======================================================================= LIBNAME VID NETAPP ARRAY_TYPE A/A-NETAPP, A/P-NETAPP, ALUA 9. Verify the output of "vxddladm listversion" command: # vxddladm listversion has version string: vm-5.0-rev-3. VXVM version: 5.0 Package Information: -------------------- # swlist VRTSNTAPasl # Initializing... # Contacting target "dmpia01"... # # Target: dmpia01:/ # # VRTSNTAPasl 5.0 Veritas NetApp Array Support Library VRTSNTAPasl.ASL_FILES 5.0 Veritas NetApp Array Support Library

Read and accept Terms of Service