Array Support Library (ASL)/Array Policy Module (APM) Details
Equallogic Array Support Library [Download] - 6 K Sign in if you want to rate this ASL/APM.

 Basic information

Library name: libvxeqlogic
Library version: vm-5.0-rev-1
Package name: Equallogic Array Support Library
Package version: 1.0
Supported product versions:
  • 5.0MP3
Embedded in VxVM?: No
Supported platforms:
  • Solaris x86-64 10
Popularity: 319 viewed  4 downloaded
Download size: 6K
Checksum: 1906024307
Release date: 2011-05-09 07:20:01

 Supported Arrays and Modes

  • EqualLogic PS3000 series, EqualLogic PS3000E, EqualLogic PS3000X, EqualLogic PS3000XV, EqualLogic PS4000 series, EqualLogic PS4000E, EqualLogic PS4000X, EqualLogic PS4000XV, EqualLogic PS5000 series, EqualLogic PS5000E, EqualLogic PS5000X, EqualLogic PS5000XV, EqualLogic PS5500E, EqualLogic PS6000 series, EqualLogic PS6000E, EqualLogic PS6000S, EqualLogic PS6000X, EqualLogic PS6000XV, EqualLogic PS6010E, EqualLogic PS6010S, EqualLogic PS6010X, EqualLogic PS6010XV, EqualLogic PS6500E, EqualLogic PS6500X, EqualLogic PS6500XV, EqualLogic PS6510E, EqualLogic PS6510X
Supported mode: A/A

 Readme file  [Save As...]

This README provides information about Array Support Library for Equallogic Arrays on Veritas Volume Manager 5.0MP3RP4HF11 and later for Solaris x64 (Opteron). ASL Package Name: VRTSEQLogic ASL Package Version: 1.0 Supported Versions of Veritas Volume Manager: 5.0MP3RP4HF11 and later Supported Arrays: Equallogic Arrays (Active/Active) NOTE: For this ASL to function correctly the VxVM version must be 5.0MP3RP4HF11 or higher. Installation Instructions: -------------------------- 1. Create a directory to download the ASL package # mkdir /tmp/asl # cd /tmp/asl 2. After downloading VRTSEQLogic_Solaris_Opteron_VM-5.0-1.0.tar.gz, verify the checksum of the file. # cksum VRTSEQLogic_Solaris_Opteron_VM-5.0-1.0.tar.gz 1906024307 6100 VRTSEQLogic_Solaris_Opteron_VM-5.0-1.0.tar.gz 3. Uncompress the file and extract the ASL package # gunzip VRTSEQLogic_Solaris_Opteron_VM-5.0-1.0.tar.gz # tar xvf VRTSEQLogic_Solaris_Opteron_VM-5.0-1.0.tar 4. Before adding the ASL package, ensure Veritas Volume Manager is installed and enabled. # vxdctl mode mode: enabled 5. Install the ASL package. # pkgadd -d . VRTSEQLogic 6. After the package is installed, you must execute the "vxdctl enable" command to claim the disk array. # vxdctl enable Note: In some cases, it has been reported that the installation of the ASL does not take effect, and "vxdctl enable" does not claim the enclosure and devices. In such cases, you can execute "vxconfigd -k" command in addition to "vxdctl enable". 7. After executing the "vxdctl enable", verify the output of the "vxddladm listsupport" and "vxddladm listversion" commands. # vxddladm listsupport libname=libvxeqlogic.so ATTR_NAME ATTR_VALUE =============================================================== LIBNAME libvxeqlogic.so VID EQLOGIC PID 100E-00 ARRAY_TYPE A/A ARRAY_NAME EQLOGIC 8. Check the ASL library version. # vxddladm listversion libname=libvxeqlogic.so libvxeqlogic.so has version string: vm-5.0-rev-1. VXVM version: 5.0 9. Verify the ASL package information. # pkginfo -l VRTSEQLogic PKGINST: VRTSEQLogic NAME: Array Support Library for EQLOGIC Arrays CATEGORY: system ARCH: i386 VERSION: 1.0,REV=10.21.2008.09.20 BASEDIR: /etc/vx VENDOR: VERITAS Software DESC: Array Support Library for EQLOGIC Arrays PSTAMP: VERSION-1.0:21-October-2006 INSTDATE: May 02 2011 22:04 HOTLINE: 800-342-0652 EMAIL: support@veritas.com STATUS: completely installed FILES: 5 installed pathnames 3 shared pathnames 3 directories 2 executables 18 blocks used (approx)

Read and accept Terms of Service