Array Support Library (ASL)/Array Policy Module (APM) Details
VRTSSUN7x10asl [Download] - 46 K Sign in if you want to rate this ASL/APM.

 Basic information

Library name: libvxsun7x10
Library version: 1.0
ASL package name: VRTSSUN7x10asl
ASL package version: 1.0,REV=09.10.2010.12.28
APM: dmpsun7x10alua
APM package version: 1.0,REV=09.10.2010.12.18
Supported product versions:
  • 5.0MP3
Embedded in VxVM?: No
Supported platforms:
  • Solaris (SPARC 8, SPARC 9, SPARC 10)
Popularity: 253 viewed  8 downloaded
Download size: 46K
Checksum: 975277929
Release date: 2011-05-24 08:47:58

 Supported Arrays and Modes

  • Sun Storage 7110 system, Sun Storage 7210 system, Sun Storage 7310 system, Sun Storage 7410 system, ZFS Storage 7120, ZFS Storage 7320, ZFS Storage 7420, ZFS Storage 7720
Supported mode: ALUA

 Readme file  [Save As...]

This README provides information on the Array Support Library (ASL) and Array Policy Module (APM) for SUN 7x10 series of arrays (ALUA), on Veritas Volume Manager 5.0MP3 and later for Solaris SPARC. ASL Package Name: VRTSSUN7x10asl ASL Package Version: 1.0,REV=09.10.2010.12.28 APM Package Name: VRTSSUN7x10apm APM Package Version: 1.0,REV=09.10.2010.12.18 Supported versions of Veritas Volume Manager: 5.0MP3 and later Supported Arrays: SUN 7x10 series of arrays (ALUA) Installation Instructions: -------------------------- 1. Create a directory to store SUN ASL and APM package # mkdir /tmp/ASLAPM # cd /tmp/ASLAPM 2. Download the ASL-APM tar package to /tmp/ASLAPM 3. After downloading VRTSSUN7x10_Solaris_SPARC_VM-5.0-1.0.tar.gz, verify checksum of the file: # cksum VRTSSUN7x10_Solaris_SPARC_VM-5.0-1.0.tar.gz 975277929 46762 VRTSSUN7x10_Solaris_SPARC_VM-5.0-1.0.tar.gz 4. Uncompress the file and extract the rpm packages: # gunzip VRTSSUN7x10_Solaris_SPARC_VM-5.0-1.0.tar.gz # tar -xvf VRTSSUN7x10_Solaris_SPARC_VM-5.0-1.0.tar 5. Before adding any ASL/APM rpm package, ensure Veritas Volume Manager is installed and enabled: # vxdctl mode mode: enabled 6. ASL Installation # pkgadd -d . VRTSSUN7x10asl 7. APM Installation # pkgadd -d . VRTSSUN7x10apm 8. After the packages are installed, execute "vxdctl enable" command to claim the disk array as SUN 7x10 array and to load the new APM: # vxdctl enable Note: In some cases, it has been reported that the installation of the ASL and/or APM does not take effect, and vxdctl enable does not claim the enclosure and devices. In such cases, you can execute the "vxconfigd -k" command in addition to "vxdctl enable". 9. After executing "vxdctl enable", verify the output of the "vxddladm listsupport" command as follows: # vxddladm listsupport ATTR_NAME ATTR_VALUE ================================================================== LIBNAME VID SUN PID Sun Storage 7410, Sun Storage 7310, Sun Storage 7210 Sun Storage 7110, ZFS Storage 7120, ZFS Storage 7320 ZFS Storage 7420, ZFS Storage 7720 ARRAY_TYPE SUN7x10-ALUA ARRAY_NAME SUN_7410, SUN_7310, SUN_7210 SUN_7110, ZFS_7120, ZFS_7320 ZFS_7420, ZFS_7720 10. Verify the output of "vxdmpadm listapm" command to make sure that the APM is in Active state: # vxdmpadm listapm dmpsun7x10alua Filename: dmpsun7x10alua APM name: dmpsun7x10alua APM version: 1 Feature: VxVM VxVM version: 50 Array Types Supported: SUN7x10-ALUA Depending Array Types: State: Active

Read and accept Terms of Service