Array Support Library (ASL)/Array Policy Module (APM) Details
VRTSHP-EVA [Download] - 51 K Sign in if you want to rate this ASL/APM.

 Basic information

Library name: libvxhpevale
Library version: vm-5.0-rev-2
Package name: VRTSHP-EVA
Package version: 1.1
Supported product versions:
  • 5.0MP2
  • 5.0MP1
  • 5.0
Embedded in VxVM?: No
Supported platforms:
  • HP-UX 11i v2 (11.23)
Popularity: 618 viewed  19 downloaded
Download size: 51K
Checksum: 1834130075
Release date: 2011-09-16 07:22:47

 Supported Arrays and Modes

  • EVA4400, EVA6400, EVA8400, StorageWorks EVA4400/6400/8400, HP P6300/P6500
Supported mode: A/A-A-HP

 Readme file  [Save As...]

======================================================================== This Readme File provides information about the Array Support Library for HP EVA Series and HP P6300/P6500 Series(Active/Active-Asymmetric) on VERITAS Volume Manager 5.0, 5.0MP1 and 5.0MP2 for HP_UX 11.23. ASL Package Name : VRTSHP-EVA ASL Package Description : Array Support Library for HP EVA 4400/6400/8400 and HP P6300/P6500 Series Arrays ASL Package Version : 1.1 Supported versions of Veritas Volume Manager : 5.0, 5.0MP1 and 5.0MP2 Supported Arrays : HP EVA4400, EVA6400 and EVA8400, HP P6300 and P6500 Supported Mode : A/A-A - Active/Active-Asymmetric ======================================================================== Installation Instructions: -------------------------- 1. Create a directory to store ASL package # mkdir /tmp/asl # cd /tmp/asl 2. Download the ASL package to /tmp/asl 3. After downloading VRTSHP-EVA_HPUX11.23_vm5.0_asl_v1.1.tar.gz, verify checksum # cksum VRTSHP-EVA_HPUX11.23_vm5.0_asl_v1.1.tar.gz 1834130075 52159 VRTSHP-EVA_HPUX11.23_vm5.0_asl_v1.1.tar.gz 4. Unzip the file and extract the rpm package # gunzip VRTSHP-EVA_HPUX11.23_vm5.0_asl_v1.1.tar.gz # tar -xvf VRTSHP-EVA_HPUX11.23_vm5.0_asl_v1.1.tar 5. Before adding any ASL package, ensure Veritas Volume Manager is installed and enabled # vxdctl mode mode: enabled 6. ASL Installation: ----------------- # swinstall -s `pwd` VRTSHP-EVA 7. After the package is installed, you must execute the `vxdctl enable` command to claim the disk array. # vxdctl enable Note: In some cases, it has been reported that the installation of the ASL does not take effect and `vxdctl enable` does not claim the the enclosure and devices. In such cases, you can execute the `vxconfigd -k` command in addition to `vxdctl enable` 8. After executing `vxdctl enable`, verify the output of the `vxddladm listsupport` command # vxddladm listsupport ATTR_NAME ATTR_VALUE ================================================== LIBNAME VID HP PID HSV300, HSV400, HSV450 HSV340, HSV360 ARRAY_TYPE A/A-A-HP ARRAY_NAME EVA4400, EVA6400, EVA8400 P6300, P6500 9. Check ASL version # vxddladm listversion has version string: vm-5.0-rev-2. VXVM version: 5.0 ======================================================================== ASL Package Information: ------------------------ # swlist VRTSHP-EVA # Initializing... # Contacting target "dmpia01"... # # Target: dmpia01:/ # # VRTSHP-EVA 1.1 Array Support Library for HP EVA 4400/6400/8400 and HP P6300/P6500 Series Arrays VRTSHP-EVA.ASL_FILES 1.1 Array Support Library for HP EVA 4400/6400/8400 and HP P6300/P6500 Series Arrays