============================================================================================
This README provides information about the Array Support Library (ASL) for Fujitsu ETERNUS
DX8000/DX400 and ETERNUS8000/4000 Series Arrays on Veritas Volume Manager 5.0 and 5.0MPx 
for Solaris (sparc)

============================================================================================
ASL Package Name	:	VRTSFJTSYe8k
ASL Package Description	:	Array Support Library for Fujitsu ETERNUS DX8000/DX400 and
				ETERNUS8000/4000
ASL Package Version	:	5.0,REV=1.1_2010.07.26.14.54

APM Package Name        :       VRTSFUJITSUapm
APM Package Description :	Array Policy Module for Fujitsu ETERNUS Series Arrays
APM Package Version     :       2.0,REV=10.09.2012.13.59


Supported versions of 
VERITAS Volume Manager	:	5.0, 5.0MP1, 5.0MP3

Supported Array Mode	:	A/A-ETERNUS

Supported Array Models	:	Fujitsu ETERNUS DX8000/DX400 and ETERNUS8000/4000 Arrays

============================================================================================

Installation Instructions:
--------------------------

Note: If the previous version of this ASL is installed in your system, please uninstall it
before installing this version.

1. Create a directory to download the ASL
	# mkdir /tmp/asl
	# cd /tmp/asl

2. After downloading VRTSFJTETERNUS8K_aslapm_SunOS_VxVM-5.0.tar.gz, verify checksum
	# cksum VRTSFJTETERNUS8K_aslapm_SunOS_VxVM-5.0.tar.gz
	192882782       38046   VRTSFJTETERNUS8K_aslapm_SunOS_VxVM-5.0.tar.gz

3. Decompress the file and extract the package:
	# gunzip VRTSFJTETERNUS8K_aslapm_SunOS_VxVM-5.0.tar.gz
	# tar xvf VRTSFJTETERNUS8K_aslapm_SunOS_VxVM-5.0.tar

4. Before adding any ASL package, ensure Veritas Volume Manager is installed and enabled
	# vxdctl mode
	mode: enabled

5. ASL Installation:
	# pkgadd -d . VRTSFJTSYe8k

6. APM Installation:
	# pkgadd -d . VRTSFUJITSUapm

7. After the package is installed, you must run the vxdctl enable command to claim
the disk array as a Fujitsu array
	# vxdctl enable

Note: In some cases, it has been reported that the installation of the ASL does not take
effect, and the vxdctl enable command does not claim the enclosure and devices. In such
cases, you can execute the vxconfigd -k command in addition to vxdctl enable.

8. After running vxdctl enable, run the vxddladm listsupport command as follows:
	# vxddladm listsupport libname=libvxFJTSYe8k.so
	ATTR_NAME           ATTR_VALUE                                                  
	===============================================
	LIBNAME             libvxFJTSYe8k.so
	VID                 FUJITSU
	PID                 E4000, E8000, ETERNUS_DX400, ETERNUS_DX8000
	ARRAY_TYPE          A/A-ETERNUS
	ARRAY_NAME          FJ_E4000, FJ_E8000, FJ_DX400, FJ_DX8000

9. Verify the ASL version Number
	# vxddladm listversion libname=libvxFJTSYe8k.so
	libvxfjtsye2k.so has version string: vm-5.0-rev-4. VXVM version: 5.0

10. Now, verify that the APM is in Active state
	# vxdmpadm listapm dmpfjteternus
	Filename:		dmpfjteternus
	APM name:		dmpfjteternus
	APM version:		1
	Feature:		VxVM
	VxVM version:		50
	Array Types Supported:	A/A-ETERNUS
	Depending Array Types:	A/A
	State:			Active

============================================================================================