=======================================================================
VRTSaslapm package (Array Support Libraries and Array Policy Modules) on
Veritas Volume Manager (tm) 6.0.1 for Solaris Sparc and Solaris Opteron
=======================================================================

Date					: 12/9/2013
	
Package Name				: VRTSaslapm

Package Description			: Array Support Libraries and
					  Array Policy Modules for
					  Veritas Volume Manager

Package Version				: 6.0.100.202

Operating System			: Solaris
Operating System version		: Sparc, x64

Veritas Volume Manager Version		: 6.0.100.000

=======================================================================
This is a Hot Fix Release for limited distribution.
The change in the HF is:

        3359217 Modified EMC ASL (libvxemc) to handle the case of BCV device
                switching to read-write mode causing continuous vxdmp error
                messages in syslog.
=======================================================================

Installation Procedure:
======================

   1. Pre-Installation Checks:
   ---------------------------

	A) If there are any external ASL/APM packages installed on 
	   the system, Remove them before you start installation of 
	   VRTSaslapm package.
		   
	B) VxVM 6.0.100.000 is the minimum VxVM version that needs to be 
	   installed before proceeding with installation of VRTSaslapm 
	   package. So make sure that VxVM 6.0.100.000 or higher version is 
	   installed on system. 
	
   2.  Package Download Instructions:
   ----------------------------------

	A. Create a directory to store the VRTSaslapm package

		# mkdir /tmp/aslapm
		# cd /tmp/aslapm

	B. Download the VRTSaslapm package

	C. After downloading VRTSaslapm_Solaris_6.0.100.202.tar.gz
	   in /tmp/aslapm directory, verify the cksum

		# cksum VRTSaslapm_Solaris_6.0.100.202.tar.gz
		1263433536   5118089  VRTSaslapm_Solaris_6.0.100.202.tar.gz

	D. Uncompress the file and extract the packages

		# gunzip VRTSaslapm_Solaris_6.0.100.202.tar.gz
		# tar -xvf VRTSaslapm_Solaris_6.0.100.202.tar

	E. Change Directory to appropriate Solaris release.

		# cd SPARC/Solaris_10 (or SPARC/Solaris_11)

		Note: The below are example installation instructions for 
			Solaris SPARC. Similar instructions can be followed 
			for Solaris Opteron.

		   
   3. Installation Instructions:
   ----------------------------

	A. If VRTSaslapm package is currently NOT installed on your 
	   system then perform an initial install.

		1. Install the package
		    Solaris_10:
			# pkgadd -d VRTSaslapm.pkg

		    Solaris_11:
			# pkg install --accept -g ./VRTSaslapm.p5p VRTSaslapm

		2. After you install VRTSaslapm package, you must execute:

			# vxdctl enable

	B. If there is a VRTSaslapm package already installed on your system 
	   then perform an upgrade/downgrade install.


                If the DMP native support is disabled
                =====================================

		1.Verify that DMP native support is disabled(off)

			# vxdmpadm gettune dmp_native_support

		2. Upgrade(or to downgrade) VRTSaslapm package to higher version, execute:

		    For Solaris 10:
			# cp /var/sadm/install/admin/default /var/sadm/install/admin/aslapm_admin
			# vi /var/sadm/install/admin/aslapm_admin
				- modify the "instance" line to be:
					"instance=overwrite"
			# pkgadd -a /var/sadm/install/admin/aslapm_admin -d VRTSaslapm.pkg 

		    For Solaris 11:
			# pkg update -g ./VRTSaslapm.p5p VRTSaslapm

		3. After you upgrade VRTSaslapm package, you must execute:

			# vxdctl enable



                If the DMP native support is enabled
                ====================================

		1.Verify that DMP native support is enabled(on)

			# vxdmpadm gettune dmp_native_support

		2. Stop the applications using LVM, unmount the filesystems,  deactivate the VGs.

			# umount <filesystem>
			# zpool export <poolname>

		3. Disable DMP native support(off)

			# vxdmpadm settune dmp_native_support=off

		4. Upgrade the VRTSaslapm package

		    For Solaris 10:
			# cp /var/sadm/install/admin/default /var/sadm/install/admin/aslapm_admin
			# vi /var/sadm/install/admin/aslapm_admin
				- modify the "instance" line to be:
					"instance=overwrite"
			# pkgadd -a /var/sadm/install/admin/aslapm_admin -d VRTSaslapm.pkg 

		    For Solaris 11:
			# pkg update -g ./VRTSaslapm.p5p VRTSaslapm

		5. Enable DMP native support(on)

			# vxdmpadm settune dmp_native_support=on

		6. Make sure VGs are up and re-mount the file-systems


   4. Post-Installation Checks:
   ----------------------------

	A. After you install VRTSaslapm package, verify output of 
	   "vxddladm listsupport" command:

		# vxddladm listsupport [all]
		# vxddladm listsupport libname=<libname>
			
	B. Check the output of "vxdmpadm listapm" command.
	   The APM should be in Active state if the corresponding array 
	   is connected:

		# vxdmpadm listapm [all | apmname]

	C. To see package information, execute

	     Solaris_10:
		# pkginfo -l VRTSaslapm

	     Solaris_11:
		# pkg info VRTSaslapm


Un-installation Procedure:
==========================
	Note: After un-installlation of VRTSaslapm package, any arrays that
		require an ASL/APM may not work properly until VRTSaslapm is 
		installed again.
		
	A. To uninstall VRTSaslapm package, execute

	     Solaris_10:
		# pkgrm VRTSaslapm

	     Solaris_11:
		# pkg uninstall VRTSaslapm

	B. After you uninstall VRTSaslapm package, you must execute

		# vxdctl enable