This TechFile provides information about the Array Support Library (ASL) for Fujitsu ETERNUS DX60/DX80/DX90 and ETERNUS2000 Arrays (Active/Active) on Veritas Volume Manager (tm) 5.0 and 5.0MPx for HP-UX 11iv2(11.23).

For general information about ASLs, refer to TechNote 249446 (link in the Related Documents section below).

Package Name: VRTSFJTSYe2k
Package Description: Array Support Library for Fujitsu ETERNUS DX60/DX80 and ETERNUS2000
Package Version: 5.0-rev-2
Supported Versions of Veritas Volume Manager: 5.0, 5.0MP1, 5.0MP2
Supported Arrays: Fujitsu ETERNUS DX60/DX80/DX90 and ETERNUS2000 Arrays (Active/Active)

Installation Instructions:
Note: If the previous version of this ASL is installed in your system, please uninstall it before installing this version.

1. Create a directory to download the ASL
# mkdir /tmp/asl
# cd /tmp/asl

2. At the bottom of this TechFile, click on Download Now to download the ASL package

3. After downloading VRTSFJTSYe2k_v2_HPUX_50.tar_323775.gz, verify checksum of the file as follows:
# cksum VRTSFJTSYe2k_v2_HPUX_50.tar_323775.gz
3701512676 338241 VRTSFJTSYe2k_v2_HPUX_50.tar_323775.gz

4. Decompress the file and extract the package:
# gunzip VRTSFJTSYe2k_v2_HPUX_50.tar_323775.gz
# tar xvf VRTSFJTSYe2k_v2_HPUX_50.tar_323775

5. Before adding any ASL package, ensure Veritas Volume Manager is installed and enabled
# vxdctl mode
mode: enabled

6. ASL Installation:
# swinstall -s `pwd` VRTSFJTSYe2k

7. After the package is installed, you must run the vxdctl enable command to claim the disk array as a Fujitsu array
# vxdctl enable

Note: In some cases, it has been reported that the installation of the ASL does not take effect, and the vxdctl enable command does not claim the enclosure and devices. In such cases, you can execute the vxconfigd -k command in addition to vxdctl enable.

8. After running vxdctl enable, run the vxddladm listsupport and vxddladm listversion command and verify the output as follows:
# vxddladm listsupport libname=libvxfjtsye2k.sl
ATTR_NAME            ATTR_VALUE                                                  
=======================================================================
LIBNAME              libvxfjtsye2k.sl                                            
VID                  FUJITSU                                                      
PID                  E2000, ETERNUS_DXL                                          
ARRAY_TYPE           A/A                                                          
ARRAY_NAME           FJ_E2000, FJ_DXL                                            

# vxddladm listversion libname=libvxfjtsye2k.sl
libvxfjtsye2k.sl has version string: vm-5.0-rev-2. VXVM version: 5.0

Package Information:
# swlist -l fileset VRTSFJTSYe2k
# Initializing...
# Contacting target "rx1620-2"...
#
# Target:  rx1620-2:/
#

# VRTSFJTSYe2k                  5.0-rev-2      Array Support Library for Fujitsu ETERNUS DX60/DX80 and ETERNUS2000
  VRTSFJTSYe2k.ASL_FILES      5.0-rev-2      Array Support Library for Fujitsu ETERNUS DX60/DX80 and ETERNUS2000