This TechFile provides information about the array support library (ASL) for Fujitsu ETERNUS DX60/DX80/DX90 and ETERNUS2000 Arrays (Active/Active) on Veritas Volume Manager (tm) 5.0, 5.0MPx and 5.0RU1 for Linux (SLES). For general information about ASLs, refer to TechNote 249446 (link in the Related Documents section below). Package Name: VRTSFJTSYe2k Package Description: Array Support Library for Fujitsu ETERNUS DX60/DX80 and ETERNUS2000 Package Version: 1.1 Supported versions of Veritas Volume Manager: 5.0, 5.0MP1, 5.0MP2, 5.0MP3, 5.0RU1 Supported Arrays: Fujitsu ETERNUS DX60/DX80/DX90 and ETERNUS2000 Arrays (Active/Active) Installation Instructions: Note: If the previous version of this ASL is installed in your system, please uninstall it before installing this version. 1. Create a directory to download the ASL # mkdir /tmp/asl # cd /tmp/asl 2. At the bottom of this TechFile, click on Download Now to download the ASL package 3. After downloading VRTSFJTSYe2k_v2_SLES_50.tar_323774.gz, verify checksum of the file as follows: # cksum VRTSFJTSYe2k_v2_SLES_50.tar_323774.gz 841549088 5610 VRTSFJTSYe2k_v2_SLES_50.tar_323774.gz 4. Decompress the file and extract the package: # gunzip VRTSFJTSYe2k_v2_SLES_50.tar_323774.gz # tar xvf VRTSFJTSYe2k_v2_SLES_50.tar_323774 5. Before adding any ASL package, ensure Veritas Volume Manager is installed and enabled # vxdctl mode mode: enabled 6. ASL Installation: # rpm -ivh VRTSFJTSYe2k-5.0-1.1_SLES.i586.rpm Note: The package name and the above installation instruction is common for SLES9, SLES10 and SLES11. 7. After the package is installed, you must run the vxdctl enable command to claim the disk array as a Fujitsu array # vxdctl enable Note: In some cases, it has been reported that the installation of the ASL does not take effect, and the vxdctl enable command does not claim the enclosure and devices. In such cases, you can execute the vxconfigd -k command in addition to vxdctl enable. 8. After running vxdctl enable, run the vxddladm listsupport and vxddladm listversion command and verify the output as follows: # vxddladm listsupport libname=libvxfjtsye2k.so ATTR_NAME ATTR_VALUE ================================================================================================= LIBNAME libvxfjtsye2k.so VID FUJITSU PID E2000, ETERNUS_DXL ARRAY_TYPE A/A ARRAY_NAME FJ_E2000, FJ_DXL # vxddladm listversion libname=libvxfjtsye2k.so libvxfjtsye2k.so has version string: vm-5.0-rev-2. VXVM version: 5.0 Package Information: # rpm -qiv VRTSFJTSYe2k Name : VRTSFJTSYe2k Relocations: (not relocatable) Version : 5.0 Vendor: Symantec Corporation Release : 1.1_SLES Build Date: Thu Apr 9 18:17:43 2009 Install Date: Thu Apr 9 18:30:40 2009 Build Host: vmlx21.veritas.com Group : System/Data Storage Source RPM: VRTSFJTSYe2k-5.0-1.1_SLES.src.rpm Size : 8229 License: Copyright (c) 2009 Symantec Corporation. All rights reserved. Symantec and the Symantec Logo are trademarks or registered trademarks of Symantec Corporation or its affiliates in the U.S. and other countries. Other names may be trademarks of their respective owners. The Licensed Software and Documentation are deemed to be "commercial computer software" and "commercial computer software documentation" as defined in FAR Sections 12.212 and DFARS Section 227.7202. Signature : (none) Packager : support@symantec.com URL : http://www.symantec.com/ Summary : Array Support Library for Fujitsu ETERNUS DX60/DX80 and ETERNUS2000 Description : Array Support Library for Fujitsu ETERNUS DX60/DX80 and ETERNUS2000 Distribution: (none)