Installation and Upgrade Checklist Report for NetBackup Server 8.2, SUSE Linux Enterprise Server 15, x86-64
NEW! = New content since the last release of SORT
Install Information | Back to top |
Procedure Overview:
Install the NetBackup Server 8.2 release.
To obtain the 8.2 release, please go to Veritas Download Center
In order to install NetBackup Server 8.2, follow the installation instructions found in the NetBackup Installation Guide
Be sure to review the 8.2 Late Breaking News.
For NetBackup clients, Veritas has developed deployment templates for Chef & SCCM, so that customers can deploy them at scale. The templates will help you to perform installation, upgrade and uninstall NetBackup clients.
To obtain the 8.2 release, please go to Veritas Download Center
In order to install NetBackup Server 8.2, follow the installation instructions found in the NetBackup Installation Guide
Be sure to review the 8.2 Late Breaking News.
For NetBackup clients, Veritas has developed deployment templates for Chef & SCCM, so that customers can deploy them at scale. The templates will help you to perform installation, upgrade and uninstall NetBackup clients.
Compatibility between NetBackup versions for Server and Client | Back to top |
-
For compatibility between major versions, the latest available release of NetBackup is compatible with media servers and clients that run a release of NetBackup that is up to one major version behind. However, this compatibility ceases to be supported in any configuration once the previous major version has reached its End of Support Life.
For information on Veritas End of Life Policy, refer to https://www.veritas.com/support/en_US/article.000116439
-
NetBackup does not support any scenario where a media server or client runs a software release update version that is higher than that of their Master server.
For more information, refer to the NetBackup Release Notes and the NetBackup Upgrade Guide: https://www.veritas.com/support/en_US/article.000116412
NetBackup Master Server | NetBackup Media Server | NetBackup Client |
8.0 | 7.0 | 7.0 |
8.0 | 7.0.1 | 7.0, 7.0.1 |
8.0 | 7.1, 7.1.0.x | 7.0, 7.0.1, 7.1, 7.1.0.x |
8.0 | 7.5, 7.5.0.x | 7.0, 7.0.1, 7.1, 7.1.0.x, 7.5, 7.5.0.x |
8.0 | 7.6, 7.6.0.x | 7.0, 7.0.1, 7.1, 7.1.0.x, 7.5, 7.5.0.x, 7.6, 7.6.0.x |
8.0 | 7.6.1, 7.6.1.x | 7.0, 7.0.1, 7.1, 7.1.0.x, 7.5, 7.5.0.x, 7.6, 7.6.0.x,7.6.1,7.6.1.x |
8.0 | 7.7 | 7.0, 7.0.1, 7.1, 7.1.0.x, 7.5, 7.5.0.x, 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7 |
8.0 | 7.7.1 | 7.0, 7.0.1, 7.1, 7.1.0.x, 7.5, 7.5.0.x, 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1 |
8.0 | 7.7.2 | 7.0, 7.0.1, 7.1, 7.1.0.x, 7.5, 7.5.0.x, 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2 |
8.0 | 7.7.3 | 7.0, 7.0.1, 7.1, 7.1.0.x, 7.5, 7.5.0.x, 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3 |
8.0 | 8.0 | 7.0, 7.0.1, 7.1, 7.1.0.x, 7.5, 7.5.0.x, 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3, 8.0 |
8.1 | 7.7 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7 |
8.1 | 7.7.1 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1 |
8.1 | 7.7.2 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2 |
8.1 | 7.7.3 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3 |
8.1 | 8.0 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3, 8.0 |
8.1 | 8.1 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3, 8.0, 8.1 |
8.1.1 | 7.7 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7 |
8.1.1 | 7.7.1 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1 |
8.1.1 | 7.7.2 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2 |
8.1.1 | 7.7.3 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3 |
8.1.1 | 8.0 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3, 8.0 |
8.1.1 | 8.1 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3, 8.0, 8.1 |
8.1.1 | 8.1.1 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3, 8.0, 8.1, 8.1.1 |
8.1.2 | 7.7 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7 |
8.1.2 | 7.7.1 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1 |
8.1.2 | 7.7.2 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2 |
8.1.2 | 7.7.3 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3 |
8.1.2 | 8.0 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3, 8.0 |
8.1.2 | 8.1 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3, 8.0, 8.1 |
8.1.2 | 8.1.1 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3, 8.0, 8.1, 8.1.1 |
8.1.2 | 8.1.2 | 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3, 8.0, 8.1, 8.1.1, 8.1.2 |
8.2 | 8.0 | 7.7.3, 8.0 |
8.2 | 8.1 | 7.7.3, 8.0, 8.1 |
8.2 | 8.1.1 | 7.7.3, 8.0, 8.1, 8.1.1 |
8.2 | 8.1.2 | 7.7.3, 8.0, 8.1, 8.1.1, 8.1.2 |
8.2 | 8.2 | 7.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2 |
8.3 | 8.0 | 7.7.3, 8.0 |
8.3 | 8.1 | 7.7.3, 8.0, 8.1 |
8.3 | 8.1.1 | 7.7.3, 8.0, 8.1, 8.1.1 |
8.3 | 8.1.2 | 7.7.3, 8.0, 8.1, 8.1.1, 8.1.2 |
8.3 | 8.2 | 7.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2 |
8.3 | 8.3 | 7.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3 |
8.3 | 8.3.0.1 | 7.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3, 8.3.0.1 |
8.3 | 8.3.0.2 | 7.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3, 8.3.0.1, 8.3.0.2 |
8.3.0.1 | 8.1 | 7.7.3, 8.0, 8.1 |
8.3.0.1 | 8.1.1 | 7.7.3, 8.0, 8.1, 8.1.1 |
8.3.0.1 | 8.1.2 | 7.7.3, 8.0, 8.1, 8.1.1, 8.1.2 |
8.3.0.1 | 8.2 | 7.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2 |
8.3.0.1 | 8.3 | 7.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3 |
8.3.0.1 | 8.3.0.1 | 7.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3, 8.3.0.1 |
8.3.0.1 | 8.3.0.2 | 7.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3, 8.3.0.1, 8.3.0.2 |
8.3.0.2 | 8.1 | 7.7.3, 8.0, 8.1 |
8.3.0.2 | 8.1.1 | 7.7.3, 8.0, 8.1, 8.1.1 |
8.3.0.2 | 8.1.2 | 7.7.3, 8.0, 8.1, 8.1.1, 8.1.2 |
8.3.0.2 | 8.2 | 7.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2 |
8.3.0.2 | 8.3 | 7.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3 |
8.3.0.2 | 8.3.0.1 | 7.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3, 8.3.0.1 |
8.3.0.2 | 8.3.0.2 | 7.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3, 8.3.0.1, 8.3.0.2 |
-
Other general rules for compatibility:
• OpsCenter/OpsCenter Analytics must always be running the same or higher Dot-Zero or Single-Dot or Double-Dot release as the master servers in the environment.
• All components (master, media, client, console, and agent) on an individual system must be at the same version.
• Backup images created under an older version of NetBackup will always be recoverable with a newer version of NetBackup
• A new feature may not be functional until the master, media and client are updated.
• Administration Consoles cannot be at an earlier version than the NetBackup server version they connect to via the "change server" functionality in the console
- NetBackup Software Compatibility Documentation:
- NetBackup 8.0 - 8.x.x Operating System Software Compatibility List (last updated on March 11, 2024)
- 8.0 - 8.x.x OS Software Compatibility List Updates
- Appliance Compatibility List
Late Breaking News - Available Hot Fixes for Server and Client | Back to top |
Available hot fixes - for details and download information, consult the Update link in the table.
For more information about installation instructions, please review NetBackup 8.2 on Support site.
For more information about installation instructions, please review NetBackup 8.2 on Support site.
Hot Fix | Description | Install Location |
UPD238422 | Bare Metal Restore Third-Party Products CD (3PPCD) | Primary(Master) Server, Media Server, Client |
UPD344759 | NetBackup Java Administration Console Language Pack (article 100033052) | Java Administration Console |
UPD751814 | NetBackup tool - NetBackup Catalog Consistency Repair Utility (NBCCR) (article 100005779) | Primary(Master) Server, Media Server, Client |
UPD113412 | NetBackup 8.2 / 3.2 - Java version 1.8.0_251 (Etrack 4002141) | Primary(Master) Server, Media Server, Client |
UPD399544 | Veritas NetBackup Server / Enterprise Server - Device Mappings Package for UNIX / Linux (article 100015983) | Primary(Master) Server, Media Server |
UPD772994 | NetBackup 8.2 / 3.2 Hotfix - CloudCatalyst EEB Bundle (Etrack 3981837) | Primary(Master) Server, Media Server, Client |
UPD881086 | NetBackup 8.2/3.2 Hotfix - Deliver JRE 1.8.0_241 (Etrack 3993649) | Primary(Master) Server, Media Server, Client |
UPD171508 | NetBackup 8.2 / 3.2 Hotfix - MSDP EEB Bundle (Etrack 3981133) | Primary(Master) Server, Media Server, Client |
UPD704001 | NetBackup 8.2/3.2 Hotfix -VMware backups crashes with status 50 occasionally on VM guests with XFS filesystems (Etrack -3993809). | Primary(Master) Server, Media Server, Client |
UPD971796 | NetBackup Server / Enterprise Server 8.1.2 and later - Cloud Configuration Package (article 100033434) | Primary(Master) Server, Media Server |
UPD754616 | NetBackup 8.2 / 3.2 HotFix - EEB Bundle containing multiple nbsl and nbsl.exe fixes (Etrack 4002172) | Primary(Master) Server, Media Server, Client |
UPD905141 | NetBackup 8.2 Hotfix - Java vulnerabilities in JRE (Etrack 3983638) | Primary(Master) Server, Media Server, Client |
UPD305311 | NetBackup 8.2 Hotfix - Java Error 8021: unable to validate user or group for certificate management (Etrack 3985912) | Primary(Master) Server, Media Server, Client |
UPD509141 | NetBackup 8.2 Hotfix - upgrade to VDDK 6.7.3 (Etrack 3985258) | Primary(Master) Server, Media Server, Client |
UPD732180 | NetBackup 8.2 Hotfix - Slow MPX to tape after checkpoint unless DBM_NEW_IMAGE_DELAY = 1000 (Etrack 3997921) | Primary(Master) Server, Media Server, Client |
UPD368923 | NetBackup 8.2/3.2 Hotfix - Slow replication jobs due to oversubscription (Etrack 3987486) | Primary(Master) Server, Media Server, Client |
UPD395269 | NetBackup 8.2 Hotfix - upgrade libssh2 (Etrack 3983345) | Primary(Master) Server, Media Server, Client |
UPD118880 | NetBackup 8.2 Hotfix - upgrade libcurl (Etrack 3983396) | Primary(Master) Server, Media Server, Client |
UPD222595 | NetBackup 8.2 / 3.2 HotFix - HSTS Missing From HTTPS Server on Appliance (Etrack 4016984) | Primary(Master) Server, Media Server, Client |
UPD829026 | NetBackup 8.2 / 3.2 Hotfix - Backups fail with status 50 and 150 under load after upgrade to 8.2 (Etrack 3983739) | Primary(Master) Server, Media Server, Client |
UPD757732 | NetBackup 8.2 Hotfix - Cluster inoperable when configureCerts fails to renew Tomcat certificate (Etrack 3988675) | Primary(Master) Server, Media Server, Client |
UPD813520 | Cloud Catalyst sync_to_cloud tool | Primary(Master) Server, Media Server, Client |
UPD368014 | NetBackup 8.2 / 3.2 Hotfix - VMware virtual machine entered into emergency mode at first boot after successful restore. (Etrack 4032016) | Primary(Master) Server, Media Server, Client |
UPD557376 | NetBackup 8.2 / 3.2 HotFix - EEB Bundle for nbdeployutil, netbackup.war, libVdb, and 2.17.1 Apache Log4j addressing CVE-2021-44228 and CVE-2021-45046 (Etrack 4021776) | Primary(Master) Server, Media Server, Client |
UPD574079 | VTS22-010 - Hotfix for Security Advisory impacting NetBackup 8.2 Clients (Etrack 4078504) | Primary(Master) Server, Media Server, Client |
UPD621711 | VTS22-011 & VTS22-010 - Hotfix for Security Advisory impacting NetBackup 8.2 and Appliance 3.2 Master and Media Server (Etrack 4069659) | Primary(Master) Server, Media Server, Client |
UPD726089 | NetBackup 8.2 Hotfix - Upgrade RabbitMQ to version 3.7.23 (Etrack 4041997) | Primary(Master) Server, Media Server, Client |
UPD874768 | VTS22-015 - Hotfix for Security Advisory impacting NetBackup 8.2 Clients (Etrack 4090406) | Primary(Master) Server, Media Server, Client |
UPD258907 | VTS22-015 - Hotfix for Security Advisory impacting NetBackup 8.2 and Appliance 3.2 Primary and Media Server (Etrack 4090407) | Primary(Master) Server, Media Server, Client |
UPD162444 | NetBackup Primary Server Migration Tool 2.3.1 | Primary(Master) Server, Media Server, Client |
UPD714038 | NetBackup 8.1.2 - 10.1.1 - nbdb_unload performance impact when upgrading to NetBackup 10.2 or above | Primary(Master) Server, Media Server, Client |
NetBackup Documentation References:
NetBackup Appliances | Back to top |
- NetBackup Appliances are Veritas-branded devices offering backup and deduplication solutions for enterprise environments in an appliance form factor. For more information, see the "NetBackup Appliances" page.
NetBackup 5200 Series (Primary/Media Server/CloudCatalyst), 5300 Series (Media Server), Virtual, and Flex Appliances
- The following tables list NetBackup 5200 Series, 5300 Series, and Virtual release versions, the Appliance models supported with each version, and the NetBackup Release version on which it is based.
- There is also a table listing NetBackup Flex Appliance versions, the Appliance models supported with each version, and the Primary Server and Media Server versions supported with each version.
- Documentation for NetBackup Appliances is available here. Late breaking news related to NetBackup Appliances is available here.
- NetBackup Appliance packages and hotfixes are available on Downloads Center.
- NOTE: References to NetBackup 5200 and 5220 Appliances have been removed from this document since these models are no longer supported.
NetBackup 5300 Series - Supported Versions
NetBackup 5300 Series Appliance Release | Supported NetBackup Appliance Models | Based on NetBackup Release |
3.3.0.1 | 5340, 5330 | 8.3.0.1 |
3.2 | 5340, 5330 | 8.2 |
3.1.2 | 5340, 5330 | 8.1.2 |
3.1.1 | 5340, 5330 | 8.1.1 |
3.1 | 5340, 5330 | 8.1 |
3.0 | 5330 | 8.0 |
NetBackup 5200 Series - Supported Versions
NetBackup 5200 Series Appliance Release | Supported NetBackup Appliance Models | Based on NetBackup Release |
3.3.0.1 | 5250, CloudCatalyst 5240, 5240, 5230 | 8.3.0.1 |
3.2 | 5250 , CloudCatalyst 5240, 5240, 5230[1] | 8.2 |
3.1.2 | CloudCatalyst 5240, 5240, 5230 | 8.1.2 |
3.1.1 | CloudCatalyst 5240, 5240, 5230 | 8.1.1 |
3.1 | CloudCatalyst 5240, 5240, 5230 | 8.1 |
3.0 | 5240, 5230 | 8.0 |
Footnotes
- 1. The Veritas 5250 Appliance requires a revised version of 3.2.
NetBackup Virtual Appliance - Supported Versions
NetBackup Virtual Appliance Release | Based on NetBackup Release | Supported Platforms |
3.3.0.1 | 8.3.0.1 | vSphere 6.0, 6.5, 6.7, 7.0 |
3.2 | 8.2 | vSphere 6.0, 6.5, 6.7 |
3.1.2 | 8.1.2 | vSphere 5.5, 6.0, 6.5 |
3.1.1 | 8.1.1 | vSphere 5.5, 6.0, 6.5 |
3.1 | 8.1 | vSphere 5.5, 6.0, 6.5 |
3.0 | 8.0 | vSphere 5.5, 6.0 |
NetBackup Flex Appliance - Supported Versions
NetBackup Flex Appliance Release | Supported NetBackup Appliance Models | Supported NetBackup Primary Server Versions | Supported NetBackup Media Server Versions | WORM (OST Target) |
2.1.2 | 5350 (Configuration A, B, C), 5340 (Configuration A, B, C, D, E, F, G, H, J), 5250 (Configuration A, B, C, D, E, F), 5150 | 10.1, 10.0.0.1, 10.0, 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.1 | 10.1, 10.0.0.1, 10.0, 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.1 | 17.0, 16.0.1, 16.0, 15.0.2, 15.0, 14.0.1, 14.0, 13.0.2, 13.0.1.1[1][2][3][4][5][6][7][8] |
2.1.1 | 5350 (Configuration A, B, C), 5340 (Configuration A, B, C, D, E, F, G, H, J), 5250 (Configuration A, B, C, D, E, F), 5150 | 10.1, 10.0.0.1, 10.0, 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.1 | 10.1, 10.0.0.1, 10.0, 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.1 | 17.0, 16.0.1, 16.0, 15.0.2, 15.0, 14.0.1, 14.0, 13.0.2, 13.0.1.1[1][2][3][4][5][6][7][8] |
2.1 | 5350 (Configuration A, B, C), 5340 (Configuration A, B, C, D, E, F, G, H, J), 5250 (Configuration A, B, C, D, E, F), 5150 | 10.0.0.1, 10.0, 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.1 | 10.0.0.1, 10.0, 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.1 | 16.0.1, 16.0, 15.0.2, 15.0, 14.0.1, 14.0, 13.0.2, 13.0.1.1[1][2][3][4][5][6][7] |
2.0.1 | 5350 (Configuration A, B, C), 5340 (Configuration A, B, C, D, E, F, G, H, J), 5250 (Configuration A, B, C, D, E, F), 5150 | 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.1 | 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.1 | 15.0.2, 15.0, 14.0.1, 14.0, 13.0.2, 13.0.1.1[1][2][3][4][5] |
2.0 | 5340 (Configuration A, B, C, D, E, F, G, H, J), 5150 | 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.1, 8.2 | 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.1, 8.2 | 14.0.1, 14.0, 13.0.2, 13.0.1.1[1][2][3] |
1.3.1 | 5340 (Configuration A), 5150 | 8.3.0.1, 8.2, 8.1.2, 8.1.1, 8.1[9] | 8.3.0.1, 8.2, 8.1.2, 8.1.1, 8.1[9] | Not supported |
1.3 | 5340 (Configuration A), 5150 | 8.3.0.1, 8.2, 8.1.2, 8.1.1, 8.1[9] | 8.3.0.1, 8.2, 8.1.2, 8.1.1, 8.1[9] | Not supported |
Footnotes
- 1. WORM storage server version 13.0.2 requires NetBackup primary and media server version 8.3.0.2 or later.
- 2. WORM storage server version 14.0 requires NetBackup primary and media server version 9.0 or later.
- 3. WORM storage server version 14.0.1 requires NetBackup primary and media server version 9.0.0.1 or later.
- 4. WORM storage server version 15.0 requires NetBackup primary and media server version 9.1 or later.
- 5. WORM storage server version 15.0.2 requires NetBackup primary and media server version 9.1.0.1 or later.
- 6. WORM storage server version 16.0 requires NetBackup primary and media server version 10.0 or later.
- 7. WORM storage server version 16.0.1 requires NetBackup primary and media server version 10.0.0.1 or later.
- 8. WORM storage server version 17.0 requires NetBackup primary and media server version 10.1 or later.
- 9. Veritas strongly recommends running NetBackup 8.2 or later with Flex Appliance.
Configuring Cloud Solutions with NetBackup CloudCatalyst Appliances
- The table below shows when a NetBackup cloud configuration and device mappings RPM package is required for configuring cloud providers with NetBackup CloudCatalyst Appliances. "Included in release" means that version of the NetBackup Appliance software contains the information needed for configuring that cloud provider, so installing an RPM is not required.
- Configuration for the cloud storage provider must be done using the Cloud Storage Configuration wizard in the NetBackup Administration Console. After this configuration is completed, you must manually create a backup policy for the deduplication (MSDP) pool catalog. For details, see the "NetBackup 52xx Appliance Initial Configuration Guide".
When to install a Cloud Configuration/Device Mappings RPM for NetBackup CloudCatalyst Appliance
Cloud solution | NetBackup Appliances running 3.2 | NetBackup Appliances running 3.3.0.1 |
ACP CS3 (S3) | Included in release | Included in release |
Alibaba Cloud Object Storage Service (OSS) (S3) | Included in release | Included in release |
Amazon Glacier (S3) | Included in release | Included in release |
Amazon Glacier Deep Archive (S3) | Included in release | Included in release |
Amazon GovCloud Glacier (S3) | Included in release | Included in release |
Amazon GovCloud Glacier Deep Archive (S3) | Included in release | Included in release |
Amazon GovCloud Simple Storage Service (S3) | Included in release | Included in release |
Amazon GovCloud Simple Storage Service - Infrequent Access (S3) | Included in release | Included in release |
Amazon Simple Storage Service (S3) | Included in release | Included in release |
Amazon Simple Storage Service - Infrequent Access (S3) | Included in release | Included in release |
Amazon Simple Storage Service - OneZone-Infrequent Access (S3) | Included in release | Included in release |
AT&T Cloud Storage (S3) | Included in release | Included in release |
China Mobile CMCC Cloud Storage (S3) | Included in release | Included in release |
China Telecom OOS (S3) | Included in release | Included in release |
Chunghwa Telecom Hicloud S3 (S3) | Included in release | Included in release |
Cloudian HyperStore Object Storage (S3) | Included in release | Included in release |
Dell EMC Elastic Cloud Storage (S3) | Included in release | Included in release |
Deutsche Telekom Open Telekom Cloud (S3) | Included in release | Included in release |
Fujitsu ETERNUS CD10000 (S3) | Included in release | Included in release |
Google Cloud Storage - Multi-Regional (S3) | Included in release | Included in release |
Google Cloud Storage - Regional (S3) | Included in release | Included in release |
Google Cloud Storage Coldline (S3) | Included in release | Included in release |
Google Cloud Storage Nearline (S3) | Included in release | Included in release |
Hitachi Vantara Content Platform (HCP) (S3) | Included in release | Included in release |
Hitachi Vantara Cloud Scale (S3) | Not Supported | Included in release |
IBM Cloud Object Storage - Cold Vault (S3) | Included in release | Included in release |
IBM Cloud Object Storage - Flex (S3) | Included in release | Included in release |
IBM Cloud Object Storage - Private (S3) | Included in release | Included in release |
IBM Cloud Object Storage - Standard (S3) | Included in release | Included in release |
IBM Cloud Object Storage - Vault (S3) | Included in release | Included in release |
Infoniqa SWISS3CLOUD (S3) | Included in release | Included in release |
Kingsoft Standard Storage Service (KS3) - Standard (S3) | Included in release | Included in release |
Kingsoft Standard Storage Service (KS3) - Standard IA (S3) | Included in release | Included in release |
Microsoft Azure (Azure) | Included in release | Included in release |
Microsoft Azure Germany (Azure) | Included in release | Included in release |
Microsoft Azure Government (Azure) | Included in release | Included in release |
NEC Cloud IaaS (S3) | Included in release | Included in release |
NEC HYDRAstor HS3 and HS8 (4th Gen), iStorage HS3 and HS8 (4th Gen) and NEC Storage HS3 and HS8 (4th Gen) (S3) | Included in release | Included in release |
NEC HYDRAstor HS3 and HS8 (5th Gen), iStorage HS3 and HS8 (5th Gen) and NEC Storage HS3 and HS8 (5th Gen) (S3) | Included in release | Included in release |
NetApp StorageGRID Webscale Object Storage (S3) | Included in release | Included in release |
NooBaa (S3) | Included in release | Included in release |
Nutanix Objects (S3) | Not supported | Included in release |
Oracle Cloud Infrastructure (S3) | Included in release | Included in release |
Orange Business Services Flexible Engine OBS (S3) | Not supported | Included in release |
Quantum Active Archive and ActiveScale Systems (S3) (formerly HGST) | Included in release | Included in release |
Quantum Lattus Object Storage (S3) | Included in release | Included in release |
Red Hat Ceph Storage (S3) | Included in release | Included in release |
SandStone MOS (S3) | Not supportedr | Included in release |
Scality RING Storage (S3) | Included in release | Included in release |
SUSE Enterprise Storage (S3) | Included in release | Included in release |
SwiftStack Object Storage (S3) | Included in release | Included in release |
Telefonica Open Cloud (S3) | Included in release | Included in release |
Veritas Access (S3) | Included in release | Included in release |
Veritas Access 3340 Appliance (S3) | Included in release | Included in release |
NetBackup 5200 Series, 5300 Series, and Virtual Appliance Supported Functionality
- The following table lists NetBackup 5200 Series, 5300 Series, and Virtual Appliance supported functionality and indicates the minimum NetBackup Appliance Release version (3.2 or later) required for support of that functionality. NetBackup 5200 Series, 5300 Series, and Virtual Appliances can be used with all supported core NetBackup clients (see the "NetBackup 8.0 - 8.x.x Operating System Software Compatibility List", application and database agents "NetBackup 8.0 - 8.x.x Database and Application Agent Compatibility List", and Snapshot client configurations.
- For information on functionality supported with earlier versions of NetBackup Appliances, see the NetBackup Appliances section of the NetBackup Enterprise Server and Server 8.0 - 8.1.x Hardware and Cloud Storage Compatibility List.
NetBackup 5200 Series, 5300 Series, and Virtual Appliances - Supported Functionality
Functionality | Minimum Appliance Release | Supported Appliance Models | Notes |
NetBackup Primary/Media Server | 3.2 | 5200 Series, Virtual | The Primary Server role is only supported on 5200 Series and Virtual Appliances. Key Management Service (KMS) and NetBackup Access Control (NBAC) are not supported when the Appliance is configured as a Primary Server. |
NetBackup Media Server | 3.2 | 5200 Series, 5300 Series, Virtual | The Primary Server in the NetBackup domain must be running a version of NetBackup equal to or newer than the NetBackup version on which the appliance is based. |
NetBackup CloudCatalyst Appliance | 3.2 | 5240 (Configuration G with 192 GB of memory), Virtual | |
Accelerator (for files and folders) | 3.2 | 5200 Series, 5300 Series, Virtual | |
Accelerator with NDMP | 3.2 | 5200 Series, 5300 Series, Virtual | Supported with Dell EMC Isilon Scale-Out NAS filers, and NetApp AFF, FAS, and V series filers.
When using this feature with a NetBackup Virtual Appliance, monitor the /dev/mapper/system-log partition to ensure it does not exceed 50% of capacity, and manage log files to increase remaining partition capacity. For information on managing accelerator track log files, see "About the track log for Accelerator for NDMP" . For more information on this feature, see the "About NetBackup Accelerator for NDMP" . |
Accelerator with VMware-type policies | 3.2 | 5200 Series, 5300 Series, Virtual | |
Auto Image Replication to MSDP/5200 Series or 5300 Series over Ethernet | 3.2 | 5200 Series, 5300 Series, Virtual | |
Auto Image Replication to MSDP/5200 Series or 5300 Series over Fibre Channel (FC) | 3.2 | 5200 Series, 5300 Series | |
Auto Image Replication to PDDO/5000 Series | 3.2 | 5200 Series, 5300 Series, Virtual | |
Client Deduplication / Client Direct over Ethernet | 3.2 | 5200 Series, 5300 Series, Virtual | Veritas allows NetBackup Clients to write data directly to NetBackup Storage Server Appliances. The client hosts the deduplication plug-in that deduplicates the backup data. The plug-in sends only unique segments to the Storage Server, reducing network traffic and distributing CPU load. For the list of supported clients, see the "Deduplication Supported Operating Systems" section of the "NetBackup 8.0 - 8.x.x Operating System Software Compatibility List" . |
Copilot for Oracle | 3.2 | 5230, 5240, 5250, 5330, 5340, Virtual | For more information on this feature, see the "NetBackup Copilot for Oracle Configuration Guide" . |
Fibre Transport Media Server | 3.2 | 5230, 5240, 5250, 5330, 5340 | Supported with 8 Gb HBAs in NetBackup 5230, 5240, 5250, 5330, and 5340 Appliances.
Supported with 16 Gb HBAs in NetBackup 5240 and 5340 Appliances. |
FIPS-compliant encryption | 3.2 | 5200 Series, 5300 Series, Virtual | FIPS-compliant encryption, as defined by the Federal Information Processing Standards 140-2, can be enabled from the NetBackup Shell Menu. For more information, see the "NetBackup Appliance Security Guide" . |
Granular Recovery Technology (GRT) | 3.2 | 5200 Series, 5300 Series, Virtual | |
Granular Recovery Technology (GRT) with VMware-type policies | 3.2 | 5200 Series, 5300 Series, Virtual | Support for VMware-type backup policies with Application Protection options enabled for Exchange or SharePoint. |
Instant Data Access | 3.2 | 5230, 5240, 5250, 5330, 5340 | This feature allows you to create an Instant Access VM from a NetBackup backup image. The VM is available almost instantaneously, achieving a near-zero recovery time objective. NetBackup mounts the VM snapshot directly on the backup storage device to allow your ESXi host or cluster to treat the snapshot as a normal VM. For more information, see the "NetBackup Web UI VMware Administrator's Guide" . |
Instant Recovery for VMware | 3.2 | 5200 Series, 5300 Series, Virtual | Support for restoring virtual machines with Instant Recovery is described in the
"NetBackup for VMware Administrator's Guide"
.
For details on supported platforms for instant recovery restore hosts, see "Support for NetBackup 7.7.x, 8.x, and 9.x in virtual environments" . |
iSCSI Initator - Hardware-assisted with TCP Offload Engine (TOE) card | 3.2 | 5240 (Configuration H), 5340 (Configurations A, B, C, D, and E) | Supports backup of VMware virtual machines using VADP with SAN transport.
For more information on this feature, see the "NetBackup Appliance iSCSI Guide" and the "NetBackup for VMware Administrator's Guide" . |
Key Management Service (KMS) | 3.2 | 5200 Series, 5300 Series | KMS is supported with Appliances configured as either a Primary or a Media Server. With a NetBackupCLI administrator account in the NetBackup Appliance Shell Menu, an Appliance Primary Server can administrate KMS with tape devices connected to itself or another NetBackup Appliance. Regenerating the data encryption key is the only supported method of recovering KMS on an Appliance Primary Server. |
NetBackup Access Control (NBAC) | 3.2 | 5200 Series, 5300 Series | Supported when the Appliance is configured as a Media Server only.
Not supported when the Appliance is configured as a Primary Server. |
NDMP | 3.2 | 5200 Series, 5300 Series, Virtual | Supported NDMP solutions are listed in the NDMP devices Vendor Compatibility section. |
NetBackup Cluster | There are no plans to support this feature. | ||
NetBackup OpenStorage Cloud and Third-Party Plug-in Support | 3.2 | 5200 Series, 5300 Series, Virtual | Supported plug-ins are listed in the "Support with NetBackup Appliance" tables shown in the
OST Cloud
and
OST Storage Servers
Vendor Compatibility sections.
For instructions on installing vendor plug-in packages on NetBackup Appliances, see "About OpenStorage plugin installation" . |
OpsCenter | 3.2 | 5200 Series, 5300 Series, Virtual | |
OpsCenter Managed Server | 3.2 | 5200 Series, 5300 Series, Virtual | |
Optimized Duplication (Opt_Dup) over Ethernet | 3.2 | 5200 Series, 5300 Series, Virtual | Supported from 5200/5300 Series/Virtual to 5000 Series (MSDP to PDDO) and from 5200/5300 Series/Virtual to 5200/5300 Series/Virtual (MSDP to MSDP). |
Optimized Duplication (Opt_Dup) over Fibre Channel (FC) | 3.2 | 5200 Series, 5300 Series | Supported from 5200/5300 Series to 5000 Series (MSDP to PDDO), and from 5200/5300 Series to 5200/5300 Series (MSDP to MSDP) |
Optimized Synthetics (Opt_Synth) | 3.2 | 5200 Series, 5300 Series, Virtual | |
Tape Drive Support | 3.2 | 5200 Series, 5300 Series | Supported tape drives are listed in the "Support with NetBackup Appliance" tables shown in the Tape Drives Vendor Compatibility section. Shared Storage Option (SSO) is supported. |
Tape Library Support | 3.2 | 5200 Series, 5300 Series | Supported tape libraries are listed with the notes "This library is also supported with NetBackup 5200 Series and 5300 Series Appliances" and "This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter" in the Tape Libraries Vendor Compatibility section. Use the NetBackup Device Configuration Wizard within the NetBackup Adminstration Console to configure robots and tape drives on the NetBackup Appliance. |
Universal Shares | 3.2 | 5240, 5250, 5330, 5340 | For more information on configuring Universal Shares, see Manage > Storage > Universal Shares |
Virtual Tape Library (VTL) Support | 3.2 | 5200 Series, 5300 Series | Supported VTLs are listed in the "Support with NetBackup Appliance" tables shown in the Virtual Tape Libraries Vendor Compatibility section. Use the NetBackup Device Configuration Wizard within the NetBackup Adminstration Console to configure VTLs and emulated tape drives on the NetBackup Appliance. |
NetBackup 5000 Series Appliances (Deduplication)
- The following table lists NetBackup 5000 Series release versions, the Appliance models supported with each version, and the equivalent Deduplication Appliance software versions. Documentation for NetBackup Appliances is available here. Late breaking news related to NetBackup Appliances is available here.
- NOTE: References to NetBackup 5000 and 5020 Appliances have been removed from this document since these models are no longer supported.
NetBackup 5000 Series - Supported Versions
NetBackup 5000 Series Appliance Release | Supported NetBackup Appliance Models | NetBackup 5000 Series Appliance Software Version |
1.4.5 | 5030 | 6.6.5 |
NetBackup 5000 Series Appliance Supported Functionality
- The following table lists NetBackup 5000 Series supported functionality and indicates the Appliance software version at which that functionality was first supported.
NetBackup 5000 Series - Supported Functionality
Functionality | Minimum Appliance Release | Supported Appliance Models | Notes |
Accelerator (for files and folders) | 1.4.5 | 5030 | |
Auto Image Replication | 1.4.5 | 5030 | |
Call Home | 1.4.5 | 5030 | |
Client Deduplication / Client Direct over Ethernet | 1.4.5 | 5030 | Veritas allows NetBackup Clients to write data directly to NetBackup Storage Server Appliances. The client hosts the deduplication plug-in that deduplicates the backup data. The plug-in sends only unique segments to the Storage Server, reducing network traffic and distributing CPU load. For the list of supported clients, see the "Deduplication Supported Operating Systems" section of the "NetBackup 8.0 - 8.x.x Operating System Software Compatibility List" . |
Fibre Channel support for PDDO | 1.4.5 | 5030 | |
Granular Recovery Technology (GRT) | 1.4.5 | 5030 | |
Intelligent Platform Management Interface (IPMI) support | 1.4.5 | 5030 | |
NetBackup OST Storage Server | 1.4.5 | 5030 | Supported OpenStorage functionality and Media Server platforms are listed in the OST Storage Servers section of OST Secondary Storage Solutions. |
Optimized Duplication (Opt_Dup) | 1.4.5 | 5030 | |
Optimized Duplication (Opt_Dup) from PDDO to MSDP | 1.4.5 | 5030 | Supported from 5000 Series to 5200/5300 Series. |
Optimized Synthetics (Opt_Synth) | 1.4.5 | 5030 | |
PureDisk Remote Office Appliance | 1.4.5 | 5030 | Supported clients: Apple Mac OS, Hewlett Packard Enterprise HP-UX, IBM AIX, Microsoft Windows, SUSE Linux Enterprise Server, Red Hat Enterprise Linux, Oracle Solaris. Supported application agents: Microsoft Exchange, Microsoft SQL, Oracle. For specific versions see the "NetBackup PureDisk 6.6.1 Compatibility List" . |
Virtual Local Area Network (VLAN) | 1.4.5 | 5030 |
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
- Appliance Compatibility List
NetBackup Self Service | Back to top |
- Veritas NetBackup Self Service offers large enterprises and service providers a single store front for all backup and recovery service offerings. Customers and business users can perform self-service backup and restore operations using intuitive, custom-designed interface themes. A single instance supports the registration of multiple tenants or business units to allow secure separation between clients. Codeless, visually-designed forms and process workflows cater to most self-service needs. Service Level Agreement (SLA) measurement, notification, chargeback, and reporting make it easy to manage the service.
-
NetBackup Self Service Documentation
•Veritas NetBackup™ Self Service Installation Guide: https://www.veritas.com/support/en_US/doc/109481741-127663622-0/index
•Veritas NetBackup™ Self Service Release Notes: https://www.veritas.com/support/en_US/doc/109473637-127663620-0/index
•Veritas NetBackup™ Self Service Configuration Guide: https://www.veritas.com/support/en_US/doc/109536476-127663621-0/index
-
NetBackup Self Service OS Platform Compatibility
NetBackup Self Service Versions | Supported Platforms | Supported Databases |
NetBackup Self Service 8.0 | Windows Server 2008 R2
Windows Server 2012/2012 R2 | Microsoft SQL Server 2012
Microsoft SQL Server 2014 |
NetBackup Self Service 8.1 | Windows Server 2012/2012 R2
Windows Server 2016 | Microsoft SQL Server 2012
Microsoft SQL Server 2014 Microsoft SQL Server 2016 |
NetBackup Self Service 8.1.2 | Windows Server 2012/2012 R2
Windows Server 2016 | Microsoft SQL Server 2012
Microsoft SQL Server 2014 Microsoft SQL Server 2016 |
NetBackup Self Service 8.2 | Windows Server 2012/2012 R2
Windows Server 2016 | Microsoft SQL Server 2012
Microsoft SQL Server 2014 Microsoft SQL Server 2016 Microsoft SQL Server 2017 Azure SQL database Microsoft SQL Server on Amazon RDS |
NetBackup Self Service 8.3 | Windows Server 2012 R2
Windows Server 2016 Windows Server 2019 | Microsoft SQL Server 2012
Microsoft SQL Server 2014 Microsoft SQL Server 2016 Microsoft SQL Server 2017 Azure SQL database Microsoft SQL Server on Amazon RDS |
-
NetBackup Master Server Compatibility
• NetBackup Self Service does not require the NetBackup client software to be installed on the Web server or SQL server, However it is recommended to have the NetBackup Client software Installed.
• The master server version remains restricted to the Netbackup client version or later versions incase the NetBackup Client software is installed on the Web Server or SQL server.
NetBackup Self Service Versions | NetBackup Versions | Appliance Versions |
NetBackup Self Service 8.0 | NetBackup 7.7
NetBackup 7.7.1 NetBackup 7.7.2 NetBackup 7.7.3 NetBackup 8.0 | NetBackup Appliance 2.7.1
NetBackup Appliance 2.7.2 NetBackup Appliance 2.7.3 NetBackup Appliance 3.0 NetBackup Virtual Appliance 3.0 |
NetBackup Self Service 8.1 | NetBackup 7.7
NetBackup 7.7.1 NetBackup 7.7.2 NetBackup 7.7.3 NetBackup 8.0 NetBackup 8.1 NetBackup 8.1.1 | NetBackup Appliance 2.7.1
NetBackup Appliance 2.7.2 NetBackup Appliance 2.7.3 NetBackup Appliance 3.0 NetBackup Appliance 3.1 NetBackup Appliance 3.1.1 NetBackup Virtual Appliance 3.0 |
NetBackup Self Service 8.1.2 | NetBackup 7.7
NetBackup 7.7.1 NetBackup 7.7.2 NetBackup 7.7.3 NetBackup 8.0 NetBackup 8.1 NetBackup 8.1.1 NetBackup 8.1.2 | NetBackup Appliance 2.7.1
NetBackup Appliance 2.7.2 NetBackup Appliance 2.7.3 NetBackup Appliance 3.0 NetBackup Appliance 3.1 NetBackup Appliance 3.1.1 NetBackup Appliance 3.1.2 NetBackup Virtual Appliance 3.0 |
NetBackup Self Service 8.2 | NetBackup 8.0
NetBackup 8.1 NetBackup 8.1.1 NetBackup 8.1.2 NetBackup 8.2 | NetBackup Appliance 3.0
NetBackup Appliance 3.1 NetBackup Appliance 3.1.1 NetBackup Appliance 3.1.2 NetBackup Appliance 3.2 NetBackup Virtual Appliance 3.0 |
NetBackup Self Service 8.3 | NetBackup 8.0
NetBackup 8.1 NetBackup 8.1.1 NetBackup 8.1.2 NetBackup 8.2 NetBackup 8.3 NetBackup 8.3.0.1 | NetBackup Appliance 3.0
NetBackup Appliance 3.1 NetBackup Appliance 3.1.1 NetBackup Appliance 3.1.2 NetBackup Appliance 3.2 NetBackup Appliance 3.3.0.1 NetBackup Virtual Appliance 3.0 NetBackup Virtual Appliance 3.3.0.1 |
-
VMware vCloud Director Compatibility
• The NetBackup master server must also support the vCloud Director version
Self Service Versions | vCloud Director Versions |
NetBackup Self Service 8.0 | 5.5, 5.6, 8.0, 8.10, 8.20, 9.0
|
NetBackup Self Service 8.1 | 5.5, 5.6, 8.0, 8.10, 8.20, 9.0
|
NetBackup Self Service 8.1.2 | 5.5, 5.6, 8.0, 8.10, 8.20, 9.0
|
NetBackup Self Service 8.2 | 5.5, 5.6, 8.0, 8.10, 8.20, 9.0, 9.1
|
NetBackup Self Service 8.2 MR1 | 5.5, 5.6, 8.0, 8.10, 8.20, 9.0, 9.1, 9.5
, 9.7
[1][1] |
NetBackup Self Service 8.3 | 5.5, 5.6, 8.0, 8.10, 8.20, 9.0, 9.1, 9.5
, 9.7
, 10.0
, 10.1
[1][1][1][1] |
Footnotes
- 1. VMware vCloud Director 9.5 and later requires VMware vCenter servers versions 6.5 and later .
-
NetBackup Self Service Supported Web Browsers
• Microsoft Edge
• Microsoft Internet Explorer 11
• Mozilla Firefox
• Google Chrome
• Apple Safari [not recommended]
- NetBackup Software Compatibility Documentation:
- NetBackup 8.0 - 8.x.x Operating System Software Compatibility List (last updated on March 11, 2024)
- 8.0 - 8.x.x OS Software Compatibility List Updates
Software Compatibility List (SCL) for Server | Back to top |
-
NetBackup is supported on all editions (Advanced, Base, DC, etc.) and on all vendor GA updates (n.1, n.2, etc.) or service packs (SP1, SP2, etc.) unless stated otherwise in the tables below.
IBM POWER 8/9 platform is supported only with Little Endian hardware architecture.
SUSE SUSE Linux Enterprise Server - NetBackup Server
OS | CPU Architecture | OS Bits | NetBackup Primary Server | NetBackup Media Server | NetBackup Bits | NBAC | OpsCenter Server | OpsCenter Managed Server | NDMP | Minimum NetBackup Level |
SUSE Linux Enterprise Server 15 | x86-64 | 64 | Y | Y | 64 | Y | Y[1] | Y | Y | 8.2 |
Footnotes
- 1. For installation prerequisites refer: https://www.veritas.com/docs/100045709
System Requirements for Server | Back to top |
NetBackup Binary Size
-
Approximate binary size of the NetBackup server software (includes client software) for an initial install.
OS - All Versions | CPU Architecture | 32-bit server | 64-bit server | Notes |
SUSE Linux Enterprise Server | x86-64 | 5468 MB |
Server Minimum Physical Memory Requirement
OS/Version | CPU Architecture | Minimum Memory Requirement |
SUSE Linux Enterprise Server 15 | x86-64 | 16 GB |
File Descriptor and File Size Requirements
-
The number of file descriptors for the Primary(Master) Server must be set to at least 8000. See 'ulimit -n' output value.
The file size limit for the Primary(Master) Server must be set to unlimited. See 'ulimit -f' output value.
Operating System Tuning Requirements
-
The following semaphore values can impact performance of the Server.
The recommended semaphore values are as follows:
SEMMSL | SEMMNS | SEMOPM | SEMMNI |
300 | 307200 | 32 | 1024 |
Catalog Maintenance Disk Space Requirement
-
This system requirement only applies to upgrades from one major, minor or release update (single or double dot) version to another, not an initial install.
Database rebuilds are likely to occur in each major, minor (single-dot), and release update (double-dot) version of NetBackup. Therefore, before upgrading to NetBackup major, minor, or release update, you must ensure that you have an amount of free disk space available that is equal to or greater than the size of the NetBackup database. That means for default installations, you are required to have that amount of free space on the file system containing the /usr/openv/db/data directory. If you have changed the location of some of the files in this directory, free space is required in those locations equal to or greater than the size of the files in those locations. For specific information for your environment, use the SORT data collector to generate a custom report. Refer to the NetBackup 8.2 Administrator's Guide, Volume I for more information about storing NBDB database files in alternate locations.
NOTE: This free disk space requirement assumes that you have already performed the best practice of completing a successful catalog backup before you begin the upgrade.
Temporary Disk Space Requirement for Install or Upgrade
-
After downloading the software, temporary disk space is required for the installation process. You may designate where this temporary space is located via use of environment variables, NB_TMPDIR or TMPDIR. NB_TMPDIR is used if set, TMPDIR next if set, otherwise /tmp. You will need approximately 571 MBs of temporary disk space during the install.
If using Live Update, you will need 4.5 GBs of temporary disk space. The location of the temporary disk space is designated in the 'workdir' setting in the /usr/openv/netbackup/nblu.conf file with /tmp being the default.
Web Server User Account Requirement
-
Beginning with NetBackup 8.0, the primary(master) server includes an active web server to support critical backup operations. A user account must be setup for it. Consult Tomcat setup for details on setting up this account.
Valid Characters in Host Names Requirement
-
NetBackup requires host names to comply with RFC-1123, meaning only ASCII characters "a" thru "z", case insensitive, and digits "0" thru "9" and the hyphen character.
CPU Cores Recommendation
-
Beginning with NetBackup 8.1, it is recommended that the primary(master) server host have 4 CPU cores.
- NetBackup Documentation References:
- ERROR CODE: error 26 bpbrm jobs failing with status 26
- Information on resource allocation within NetBackup
- Insufficient system file descriptors can cause performance issues and possible growth in the EMM_DATA.db file
- Minimum O/S ulimit settings on UNIX platforms
- NetBackup OpsCenter Performance and Tuning Guide
- NetBackup pre-install check detects insufficient space to perform upgrade
- Recommended NetBackup UNIX / Linux semaphore tuning values (Linux/Solaris/HP-UX/AIX)
- NetBackup Release Notes
- NetBackup Self Service Release Notes
Browser Requirements for NetBackup Web UI for Server | Back to top |
-
The NetBackup Web UI is compatible with the latest vendor-supported versions of web browsers.
For the best experience with the NetBackup Web UI, Veritas recommends that you use Google Chrome or Mozilla Firefox, without any plug-ins.
Web Browser | Versions | Notes |
Mozilla Firefox | 60 or later. | The latest browser edition is recommended. Download from https://www.mozilla.org/en-US/firefox/ |
Google Chrome | 65 or later. | The latest browser edition is recommended. Download from https://www.google.com/chrome/ |
- NetBackup Documentation References:
- NetBackup 8.0 - 8.x.x Operating System Software Compatibility List (last updated on March 11, 2024)
- 8.0 - 8.x.x OS Software Compatibility List Updates
- NetBackup Web UI Backup Administrator's Guide
- NetBackup Web UI Cloud Administrator's Guide
- NetBackup Web UI RHV Administrator's Guide
- NetBackup Web UI Security Administrator's Guide
- NetBackup Web UI VMware Administrator's Guide
Integrated Snapshot Management using CloudPoint for Server | Back to top |
- Information on hardware and cloud applications that are compatible with earlier versions of CloudPoint is contained in the following documents:
Veritas CloudPoint Compatibility Lists for earlier versions
Compatibility List Name | URL |
CloudPoint 2.2.1 Hardware Compatibility List (HCL) | https://www.veritas.com/support/en_US/doc/CP_221_HCL |
CloudPoint 2.2.1 Cloud Application Compatibility List | https://www.veritas.com/support/en_US/doc/CP_221_APP_CL |
CloudPoint 2.2 Hardware Compatibility List (HCL) | https://www.veritas.com/support/en_US/doc/CP_22_HCL |
CloudPoint 2.2 Cloud Application Compatibility List | https://www.veritas.com/support/en_US/doc/CP_22_APP_CL |
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
Replication Director for Server and Client | Back to top |
This feature is not supported on this platform.
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
Virtual Systems Compatibility for Server and Client | Back to top |
-
This Statement of Support for NetBackup in a Virtual Environment document describes the extent of support for NetBackup within a virtual environment. Ideally, every NetBackup configuration supported in a traditional physical environment would also be supported in any virtual environment without qualification. While that is our mission, it is not always possible.
Therefore, the purpose of this document is to:
• Clarify differences between NetBackup support in physical vs. virtual environments
• Describe general guidelines for support in virtual environments.
• Describe impact upon specific NetBackup components: clients, servers, options, etc.
• Provide references to related information.
VMware Compatibility
-
Virtual Systems Compatibility - Refer: Support for NetBackup in a Virtual Environment - https://www.veritas.com/content/support/en_US/article.100040093
• For supported vSAN configurations, refer article https://kb.vmware.com/s/article/55071
• NetBackup supports all minor patch releases (like: EP, U1x) unless otherwise noted.
• Software Defined Data-Center(SDDC) environments which includes NSX, NSX-T or other networking technologies are transparent to NetBackup and are supported.
• VMware Cloud on AWS(VMC) support starts from NetBackup 8.1.2
• Google Cloud VMware Engine (GCVE) is supported on NetBackup 8.1 and later versions
NetBackup Versions | VDDK Versions | vSphere Versions | vCloud Director Versions | Backup/Restore Host Versions |
8.2 | 6.7.2 | vSphere 7.0, 7.0 U1, 7.0 U2, 7.0 U3
vSphere 6.7, 6.7 U1, 6.7 U2, 6.7 U3 vSphere 6.5, 6.5 U1, 6.5 U2, 6.5 U3 vSphere 6.0, 6.0 U1, 6.0 U2, 6.0 U3 VMware vSAN 6.5, 6.6, 6.6.1, 6.7, 6.7 U1, 6.7 U2, 6.7 U3 VMware vSAN 7.0, 7.0 U1, 7.0 U2, 7.0 U3 Refer VMware VDDK release notes URL below for additional information on supported vCenter and ESXi versions. | Service Provider Versions: 9.0, 9.1, 9.5, 9.7, 10, 10.1
| All 64 bit only:
Windows Server 2016, 2012 R2, 2012, 2008 R2 Windows 10 Red Hat Enterprise Linux (RHEL) 6.8, 6.9, 6.10, 7.2, 7.3, 7.4, 7.5, 7.6 SUSE Linux Enterprise Server (SLES) 11 SP4 12 SP3, 12 SP4, 15 CentOS 7.4 |
-
• For vCloud Director 8.0, 8.0.1, 8.0.2 to determine the host name: Refer to https://www.veritas.com/support/en_US/article.000108257
• For vCloud Director 8.0, 8.0.1, 8.0.2 NetBackup restores to vCloud: Refer to http://www.veritas.com/docs/000108831
• NetBackup does not support the vCloud Director 8.20, 9.0 and 10 feature called "Automatic discovery and import of vCenter VMs."
-
Note the following:
• NetBackup Web Client Plugin is not supported with VMware vSphere 7.0 U1,7.0 U2, 7.0 U3 on NetBackup 8.3, 8.3.0.1 and 8.3.0.2
• NetBackup Web Client Plugin is not supported with VMware vSphere 7.0 and later updates on NetBackup 8.2
• NetBackup Instant Access is not supported with VMware vSphere 7.0 U1, 7.0 U2, and 7.0 U3 on NetBackup 8.3 and 8.3.0.2
• The EEB required for Instant Access with VMware vSphere 7.0 U1, 7.0 U2, and 7.0 U3 on 8.3.0.1 can be obtained from Veritas Technical Support. Refer https://www.veritas.com/support/en_US/article.100048721 for additional details.
• VMware version information can also be obtained from the VMware Product Interoperability Matrix, and is subject to change by VMware. For the latest information, see the following: http://www.vmware.com/resources/compatibility/sim/interop_matrix.php
• NetBackup supports installation of the backup host in a virtual machine (VMware "hotadd"). The guest operating systems that NetBackup supports for hotadd are the same as the above.
• For the Linux VMware backup host or restore host, locales other than UTF-8 are not supported.
• NetBackup 8.0 and later supports VMware Virtual Volumes (VVols)
• NetBackup 8.1.2 introduces Instant Access for VMware for vCenter and ESXi versions 5.5 and later.
• NetBackup supports all triple-dot versions of VMware vCloud Director, unless otherwise noted.
• Install "VMware ESXi 6.0, Patch Release ESXi600-201511001 (2137545)" for consistent backups. This ESX patch is mandatory, according to VMware, to fix the data loss situation reported in VMware KB article 2136854.
For more information about the cause and the resolution of this issue, see: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2136854
-
VMware VDDK Release Notes:
• VDDK 6.0.2 Release Notes: https://code.vmware.com/docs/3930/vddk-6-0-2-release-notes
• VDDK 6.5.1 Release Notes: https://code.vmware.com/docs/5584/virtual-disk-development-kit-6-5-1-release-notes
• VDDK 6.5.2 EP1 Release Notes: https://code.vmware.com/docs/6175/virtual-disk-development-kit-6-5-2-ep1-release-notes
• VDDK 6.5.3 Release Notes: https://code.vmware.com/docs/6842/virtual-disk-development-kit-6-5-3-release-notes
• VDDK 6.7.2 Release Notes: https://code.vmware.com/docs/8100/virtual-disk-development-kit-6-7-2-release-notes
• VDDK 7.0 Release Notes: https://code.vmware.com/docs/11697/virtual-disk-development-kit-7-0-release-notes.
Hyper-V Servers Compatibility
-
Hyper-V is supported on Microsoft Windows Server Editions which are compatible with NetBackup Client. Refer to Operating System Compatibility table for details.
Hyper-V Servers Compatibility - Reference Article: TECH127089 Statement of Support for NetBackup in a Virtual Environment: http://www.veritas.com/docs/000006177
Note:
• NetBackup Client must be installed on the Hyper-V server
• Master and Media Server platform support as supported by the appropriate NBU release
NetBackup Versions | Hyper-V Server Versions | System Center Virtual Machine Manager Versions | Comments |
8.0
8.1 8.1.1 8.1.2 8.2 8.3 | Hyper-V Server 2019
Hyper-V Server 2016 Hyper-V Server 2012 R2 Hyper-V Server 2008 R2 Hyper-V Server 2008SP2 | NetBackup Add-In and Hyper-V Intelligent Policy for
• SCVMM 2012 R2 • SCVMM 2016 • SCVMM 2019 | • Hyper-V Intelligent Policy supported only for Hyper-V Server 2012 R2 (and associated updates), Hyper-V Server 2016, Hyper-V Server 2019.
• VHD and VHDX support |
-
File-level recovery from a Hyper-V backup is not supported in case of following scenarios.
• Any guest OS volume that resides on a 4Kn virtual disk (VHDX file).
• Files in guest OS that reside on REFS or NTFS deduplicated volume.
WMI backup features and limitations:
• WMI method is supported for Windows Server 2016 and above.
• Requires a VM configuration version later than 5.
• VMs can be hosted on either the NTFS, ReFS, Windows Storage Spaces, Storage Spaces Direct or SMB 3.0 file shares.
• WMI backup method does not support backup or restore of user-created checkpoints of the VM.
• Faster Hyper-V backup and recovery feature requires block-level incremental to be enabled and can only be saved to deduplication storage unit.
VSS backup limitations:
• VMs must reside on the NTFS file system (ReFS or NTFS Deduplication is not supported).
• Block-level incremental backup is not supported.
• Backing up VM's residing on SMB 3.0 file shares is not supported.
Hyper-V Limitations
• Backup of a Hyper-V guest OS that use VHD Sets or shared VHDX file is not supported.
• Hyper-V Server 2019 and System Center Virtual Machine Manager 2019 is supported from NetBackup version 8.1.2
• Hyper-V Server on windows Server Semi-Annual Channel builds are supported with partial functionality.
Refer technote for additional details https://www.veritas.com/docs/100041472
Nutanix AOS versions and backup host
-
Supported Nutanix AOS versions and backup host operating systems
NetBackup for Nutanix AHV protects Nutanix AHV virtual machines by integrating with Nutanix APIs for Data Protection.
All minor versions of Nutanix AOS are supported unless specifically noted in the table below.
NetBackup Versions | Nutanix AOS Versions | Backup/Restore Host Versions | Notes |
8.2, 8.3 | 5.10
5.11 5.15 5.17 5.18, 5.19, 5.20, 6.0, 6.1 , 6.5 [1][1] | NetBackup 8.2 and 8.3 supported x86-64 platforms of Red Hat Enterprise Linux and SUSE Linux Enterprise Server will work as backup hosts.
| • Nutanix AOS 5.10 is supported with “BigData” and “Hypervisor” policy type.
• Nutanix AOS 5.11 and later versions are supported with "Hypervisor” policy type only • NetBackup plug-in for Nutanix-AHV is required to enable "Hypervisor” policy on NetBackup 8.2, The Plugin can be downloaded from SORT/Download Centre. The EEB required to enable the support can be obtained from Veritas Technical Support |
Footnotes
- 1. Support for AOS 5.18 and above with NetBackup 8.2 requires an EEB from Veritas Support. For details, refer https://www.veritas.com/support/en_US/article.100049391.
-
Note the following:
• Going forward any new AOS versions and new feature sets will be supported with “Hypervisor” policy only. Veritas recommends switching to “Hypervisor” policy for Nutanix AHV protection. Refer: https://www.veritas.com/content/support/en_US/doc/127664414-140673866-0/v127666788-140673866
• Refer Nutanix Acropolis Hypervisor (AHV) Administrator's Guide for knowing more on Nutanix-AHV VM protection. https://www.veritas.com/content/support/en_US/doc/127664414-140673866-0/v127666788-140673866
• To backup other hypervisors like VMware ESX or a Hyper-V on a Nutanix Acropolis cluster, please see VMware ESX or a Hyper-V SCL for support matrix. To backup VMware ESX or a Hyper-V on a Nutanix Acropolis cluster, use a VMware policy or a Hyper-V, respectively.
• NetBackup supports installation of the backup host in a virtual machine.
• English only AHV is supported.
• Backups are Crash Consistent.
• AHV Community Edition is not supported.
• Nutanix-AHV Plugin can be installed on NetBackup Master, Media or Client to be used as Nutanix Backup Host. Veritas recommends having NetBackup Media server as Backup-Host.
• Backup of VMs having volume groups is not supported.
• NetBackup currently does not support file-level recovery. Backup and recovery of the entire virtual machine for all guest operating systems is supported.
Red Hat Virtualization Compatibility
-
Supported RedHat Virtualization (RHV) Versions
• NetBackup currently supports only x86-64 editions of RHV servers.
NetBackup Versions | RHV Versions |
8.2 | 4.2
4.3 |
-
Note:
• Support of Red Hat Virtulization Manager and Hypervisor starts from version 4.2.7
• NetBackup 8.2 supported x86-64 platforms of Microsoft Windows Server, Red Hat Enterprise Linux and SUSE Linux Enterprise Server will work as backup hosts.
• Application consistent backup needs RHV Guest Agent.
• Pass through disk cannot be backed up by RHV agent. Please install NetBackup client inside the VM to protect data on such disks.
• RHV 4.3.3 has issue in restoring thick provision disk. Till fix is available from RedHat, please restore disk as thin provision.
• VMs in suspended state cannot be protected.
• Cinder storage is currently not supported.
• Backup of VMs based on a template (thin clone) may fail to delete snapshots created by the backup job. If such a condition is encountered, then subsequent backups would fail.
This issue is related to a race condition in RHV Manager versions 4.2.x, 4.3.0 to 4.3.3. Red Hat recommends upgrading RHV Manager to 4.3.4 before protecting such VMs.
Refer: https://access.redhat.com/support/policy/updates/rhev
OpenStack Virtualization Compatibility
-
Supported OpenStack Versions
Distributions which include the following OpenStack versions are supported.
Supported Hypervisor: KVM
NetBackup Versions | OpenStack Revisions | Backup/Restore Host Versions |
8.2 | Mitaka, Newton, Ocata, Pike, Queens, Rocky, Stein, Train, Ussuri , Victoria[1][1] | NetBackup 8.2 supported x86-64 platforms of Red Hat Enterprise Linux and SUSE Linux Enterprise Server will work as backup hosts. |
Footnotes
- 1. EEB for NetBackup 8.2 can be obtained from Veritas technical support
VMware vRealize Compatibility
Veritas NetBackup plug-in for VMWare vRealize Version | VMWare vRealize Orchestrator Versions | NetBackup Versions |
1.0 | 7.5
7.6 | NetBackup 8.1.2
NetBackup 8.2 NetBackup 8.3 NetBackup 8.3.0.1 |
1.1 | 7.5
7.6 | NetBackup 8.1.2
NetBackup 8.2 NetBackup 8.3 NetBackup 8.3.0.1 |
2.0 | 8.3
8.4 | NetBackup 8.2
NetBackup 8.3 NetBackup 8.3.0.1 |
-
Note:
• NetBackup 8.2 and later versions support Backup Now for VMWare VM, AWS VM and AWS Volumes
• NetBackup 8.2 and later versions support API Key Authentication in addition to standard Authentication.This is recommended
- NetBackup Software Compatibility Documentation:
- NetBackup 8.0 - 8.x.x Operating System Software Compatibility List (last updated on March 11, 2024)
- 8.0 - 8.x.x OS Software Compatibility List Updates
Cluster Compatibility for Server | Back to top |
- This Software Compatibility List (SCL) document contains information for Veritas NetBackup 8.0 through 8.x.x. It covers NetBackup Server (which includes Enterprise Server and Server), Client, Bare Metal Restore (BMR), Clustered Master Server Compatibility and Storage Stacks, Deduplication, File System Compatibility, NetBackup OpsCenter, NetBackup Access Control (NBAC), SAN Media Server/SAN Client/FT Media Server, Virtual System Compatibility and NetBackup Self Service Support. It is divided into bookmarks on the left that can be expanded.
- IPV6 and Dual Stack environments are supported from NetBackup 8.1.1 onwards with few limitations, refer technote for additional information http://www.veritas.com/docs/100041420
- For information about certain NetBackup features, functionality, 3rd-party product integration, Veritas product integration, applications, databases, and OS platforms that Veritas intends to replace with newer and improved functionality, or in some cases, discontinue without replacement, please see the widget titled "NetBackup Future Platform and Feature Plans" at https://sort.veritas.com/netbackup
- Reference Article https://www.veritas.com/docs/100040093 for links to all other NetBackup compatibility lists.
- NetBackup Cluster Compatibility Documentation:
- NetBackup 8.0 - 8.x.x Operating System Software Compatibility List (last updated on March 11, 2024)
- 8.0 - 8.x.x OS Software Compatibility List Updates
Bare Metal Restore (BMR) Support for Server | Back to top |
-
General Information
-
Bare Metal Restore Server (BMR server) is a feature of the Master Server.
• BMR Boot Server
BMR Boot Server is supported on the same Operating Systems as the BMR client. In case of Windows, BMR Boot Server bitness is not relevant. I.E., a Windows x86 boot server can boot x86 and x64 servers and visa-versa.
• BMR Boot Server Requirements
Please Reference the Requirements for Bare Metal Restore (BMR) Boot Servers document for comprehensive information, http://www.veritas.com/docs/000041982.
Please refer to the following link for BMR supported configurations: https://www.veritas.com/support/en_US/article.000127612
Disclaimer:
• NetBackup Bare Metal restore functionality is not supported for restoring the clients which have NetBackup version 8.1 installed.
• NetBackup does not support BMR restore operations in AIX and HP-UX environments for clients with NetBackup version 8.1.1
• Bare Metal Restore of clients which have NetBackup version 8.0 and earlier installed, Veritas recommends that you should use Shared Resource Tree (SRT) having 8.0 and earlier client version.
• BMR restores uses NBCA certificates hence master and media (servers which have backup images for BMR client) should have NBCA enabled for BMR restores to work.
For more information on supported workflows refer technote https://www.veritas.com/support/en_US/article.100044534
- NetBackup Software Compatibility Documentation:
- NetBackup 8.0 - 8.x.x Operating System Software Compatibility List (last updated on March 11, 2024)
- 8.0 - 8.x.x OS Software Compatibility List Updates
Deduplication Supported Operating Systems for Server | Back to top |
-
If you are looking for information regarding PureDisk support, and not media server deduplication, reference article http://www.veritas.com/docs/000008731
For further details on recommended hardware reference NetBackup Deduplication: Additional Usage Information: http://www.veritas.com/docs/000041111
-
Where support is shown for "Windows Server 2008" or "Windows Server 2008 R2" it is implied that Standard Edition, Enterprise Edition, Datacenter Edition, and Web Edition are supported.
Where support is shown for "Windows Server 2012", or "Windows Server 2012 R2" it is implied that Foundation Edition, Essentials Edition, Standard Edition, and Datacenter Edition are supported.
- Media Server Deduplication (MSDP) is supported in an Infrastructure as a Service (IaaS) environment on any cloud platform that meets minimum requirements. For additional details on minimum and recommended configurations see NetBackup Media Server Deduplication (MSDP) in the Cloud https://www.veritas.com/support/en_US/article.000004584.
OS | CPU Architecture | Media Server Dedupe | Minimum NetBackup Level |
SUSE Enterprise Linux Server 15 | x86-64 | Yes | 8.2 |
- NetBackup Software Compatibility Documentation:
- NetBackup 8.0 - 8.x.x Operating System Software Compatibility List (last updated on March 11, 2024)
- 8.0 - 8.x.x OS Software Compatibility List Updates
Descriptions of Disk Storage Unit Types for Server | Back to top |
- NetBackup permits the creation of an unlimited number of disk storage units. The types of storage units are described in the table below.
Disk Storage Unit Types
BasicDisk
- A BasicDisk type storage unit consists of a directory on a locally-attached disk or a network-attached disk that is exposed as a file system to a NetBackup media server. NetBackup stores backup data in the specified directory.
BasicDisk - Considerations
Subject | Notes |
Configuration considerations | 1. Do not include the same volume or file system in multiple BasicDisk storage units.
2. BasicDisk storage units cannot be used in a storage lifecycle policy. |
AdvancedDisk
- An AdvancedDisk type storage unit is used for a dedicated disk that is directly attached to a NetBackup media server. AdvancedDisk is available only when the Data Protection Optimization Option is licensed. NetBackup assumes exclusive ownership of the disk resources that comprise an AdvancedDisk disk pool. If the resources are shared with other users, NetBackup cannot manage disk pool capacity or storage lifecycle policies correctly. For AdvancedDisk, the NetBackup media servers function as both data movers and storage servers. For more information on configuring AdvancedDisk, see the "NetBackup AdvancedDisk Storage Solutions Guide".
AdvancedDisk - Considerations
Subject | Notes |
Support assumptions | 1. Veritas NetBackup has an open support policy for AdvancedDisk storage units.
The storage must be seen as local disk by the NetBackup Media Server, regardless of connection method (SCSI, Fibre Channel, iSCSI, etc), to be supported as an AdvancedDisk storage unit.
Please note: Due to the open support policy, and the range of 3rd party storage solutions, it is the responsibility of the customer to ensure that the chosen storage solution meets the specific performance needs in the specific production environment. Veritas NetBackup features that are performance-dependent, such as Granular Restore Technology (GRT) are not supported with AdvancedDisk storage units. Hybrid storage solutions, with a mix of both local (LAN or FC) and WAN (remote or cloud) based storage tiers, have become available. Thorough testing of these storage solutions, when used as AdvancedDisk storage units, needs to be completed by the customer, to the customer's satisfaction, particularly in the area of restore operations, to ensure that timeouts do not occur. Some specific hybrid storage solutions have been tested as NetBackup AdvancedDisk storage units, in Veritas labs, with joint effort and in cooperation with Veritas storage partners. Resulting white papers and reference materials will appear here: - Microsoft Azure StorSimple: "Configure StorSimple with Veritas NetBackup" All-flash storage solutions are included in the AdvancedDisk open support policy. Some specific all-flash storage solutions have been tested as NetBackup AdvancedDisk storage units, in Veritas labs, with joint effort and in cooperation with Veritas storage partners. Examples are: - Pure Storage FlashBlade - Violin Systems Flash Storage Platform 2. Veritas InfoScale Foundation and Storage Foundation are supported with NetBackup AdvancedDisk. For information on disk arrays that are supported with the InfoScale Foundation or Storage Foundation version you're running, please see "Veritas Services and Operations Readiness Tools (SORT)" . 3. AdvancedDisk functionality is subject to all functional limitations as imposed either by the operating system or by the underlying file system. |
Configuration considerations | 1. For UNIX NetBackup Media Servers, AdvancedDisk requires that all LSUs (Logical Storage Units) are active mount points within the UNIX host.
Using the NFS automount feature is not recommended with AdvancedDisk.
2. Access to NFS storage requires NetBackup daemons to run as root. The NFS server exporting the file system must be configured to allow root access to the file system. 3. To ensure support, the disk array must be combined with interconnect hardware that is supported by the disk array manufacturer and the operating system vendor. Refer to the respective vendor's support lists for this information. 4. When installing and configuring HBA drivers it is recommended that the array vendor-qualified HBA drivers be used as opposed to the general HBA drivers that are released for each operating system. These array vendor-qualified HBA drivers are typically found in a separate section of the HBA vendor or array vendor's website, often separated by array model. 5. Performance may vary depending on the array hardware used. |
OpenStorage
- An OpenStorage type storage unit is used for disk storage, usually provided by a third party vendor. The actual name of the disk type depends on the vendor. OpenStorage is available only when the OpenStorage Disk Option is licensed. The storage is integrated into NetBackup through an API. The storage vendor partners with Veritas to integrate the storage into NetBackup. The storage host is the storage server. The NetBackup media servers function as the data movers. The storage vendor's plug-in must be installed on each media server that functions as a data mover. The logon credentials to the storage server must be configured on each media server. For more information on configuring OpenStorage, see the "NetBackup OpenStorage Solutions Guide for Disk".
PureDisk
- A PureDisk disk type storage unit is used for deduplicated data for Media Server Deduplication Pools (MSDP) and PureDisk storage pools.
Media Server Deduplication Pool (MSDP)
- When a Media Server Deduplication Pool is configured, NetBackup deduplicates the data and hosts the storage. MSDP is available only when the NetBackup Data Protection Optimization Option is licensed.
- The following all-flash storage solutions have been tested as NetBackup MSDP storage in Veritas labs, with joint effort and in cooperation with Veritas storage partners, and are supported with the following limitations:
Storage Solution | Notes |
Pure Storage FlashBlade | - Requires Purity//FB 3.0.2 or later running NFS version 3.
- Requires Flex 5340 Appliance version 1.3 or later. - Requires Flex NetBackup Images version 8.2 or later. - Requires Flex Add-Ons for NetBackup 8.2: "NetBackup 8.2 Hotfix - MSDP EEB Bundle (Etrack 3981133)" and Flex add-on netfs. - Maximum aggregate size of MSDP pool supported with this device is 250 TB. - NetBackup Client-side deduplication is supported. - NetBackup Accelerator (for files and folders) is supported. - NetBackup Auto Image Replication (A.I.R.) is supported. - Not supported with Veritas Instant Access, Instant Recovery, and Universal Shares. |
- Veritas reserves the right to approve customer scenarios on a case-by-case basis prior to confirming support.
- For more information on configuring MSDP, see the "NetBackup Deduplication Guide".
PureDisk
- When a PureDisk storage pool is configured, a NetBackup 5000 Series Appliance hosts the storage. For more information, see the "Configuring a storage server for a PureDisk Deduplication Pool".
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
Cloud Configuration Files for Server | Back to top |
- The latest version of this file is included in NetBackup release updates and is also available for download independently on the Veritas support site. This file is updated whenever new cloud provider support is needed, independent of NetBackup release updates. This file is cumulative, so the most recent version contains all support added in earlier versions. The column "NetBackup version" indicates the NetBackup Primary Server version that the Cloud Configuration package requires for installation.
- For more information on configuring Cloud solutions see "About the cloud storage vendors for Veritas NetBackup".
Cloud Configuration File Packages
Cloud Configuration Package version | NetBackup version | URL | Providers added |
2.10.7 | Media Server: 8.0 or later | Media Server: https://www.veritas.com/content/support/en_US/downloads/update.UPD971796.html | Added support:
- VAST data (S3) Added earlier support not included in NetBackup 10.2 release: - Amazon Glacier Instant Retrieval (IR) - Backblaze B2 Cloud Storage (S3) - DataCore Swarm (S3) - iTernity iCAS FS (S3) - Quantum ActiveScale Glacier Storage Class - Spectra Vail (S3) - STACKIT Object Storage (S3) - NEC Cloud IaaS Object Storage N2 (S3) - Amazon (S3) - Asia Pacific (Jakarta) region - Amazon (S3) – ME (UAE) region - Google (S3) - Asia South2 (Delhi) region - Google (S3) - Australia-Southeast2 (Melbourne) region - Google (S3) - EU West8 (Milan) region - Google (S3) - EU West9 (Paris) region - Google (S3) - EU Southwest1 (Madrid) region - Google (S3) - North America Northeast2 (Toronto) region - Google (S3) - US East5 (Columbus) region - Google (S3) - US South1 (Dallas) region - Wasabi (S3) - AP Southeast 1 (Singapore) region - Wasabi (S3) - AP Southeast 2 (Sydney) region - Wasabi (S3) - EU Central 2 (Frankfurt) region - Wasabi (S3) - CA Central 1 (Toronto) region - Wasabi (S3) - EU West 2 (Paris) region |
2.10.6 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- STACKIT Object Storage (S3) - Backblaze B2 Cloud Storage (S3) - NEC Cloud IaaS Object Storage (N2) (S3) |
2.10.5 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Spectra Logic Vail (S3) - DataCore Swarm (S3) - Google (S3) - Middle East West1 (Tel Aviv) region Added earlier support not included in NetBackup 10.1.1 release: - Amazon Glacier Instant Retrieval (IR) - iTernity iCAS FS (S3) - Amazon (S3) - Asia Pacific (Jakarta) region - Amazon (S3) - Middle East (UAE) region - Google (S3) - Asia South2 (Delhi) region - Google (S3) - Australia-Southeast2 (Melbourne) region - Google (S3) - EU West8 (Milan) region - Google (S3) - EU West9 (Paris) region - Google (S3) - EU Southwest1 (Madrid) region - Google (S3) - US East5 (Columbus) region - Google (S3) - US South1 (Dallas) region - Google (S3) - North America Northeast2 (Toronto) region - Wasabi (S3) - EU West 2 (Paris) region - Wasabi (S3) - AP Southeast 1 (Singapore) region - Wasabi (S3) - AP Southeast 2 (Sydney) region - Wasabi (S3) - EU Central 2 (Frankfurt) region - Wasabi (S3) - CA Central 1 (Toronto) region |
2.10.4 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Google (S3) - EU West8 (Milan) region |
2.10.3 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Veritas NetBackup Recovery Vault AWS Glacier Deep Archive |
2.10.2 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Amazon (S3) - Middle East (UAE) region |
2.10.1 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
Added earlier support not included in NetBackup 10.1 release: - Amazon Glacier Instant Retrieval (IR) - iTernity iCAS FS (S3) - Amazon (S3) - Asia Pacific (Jakarta) region - Google (S3) - Asia South2 (Delhi) region - Google (S3) - Australia-Southeast2 (Melbourne) region - Google (S3) - EU West9 (Paris) region - Google (S3) - EU Southwest1 (Madrid) region - Google (S3) - US East5 (Columbus) region - Google (S3) - US South1 (Dallas) region - Google (S3) - North America Northeast2 (Toronto) region - Wasabi (S3) - EU-West-2 (Paris) region - Wasabi (S3) - AP Southeast 1 (Singapore) region - Wasabi (S3) - AP Southeast 2 (Sydney) region - Wasabi (S3) - EU Central 2 (Frankfurt) region - Wasabi (S3) - CA Central 1 (Toronto) region |
2.9.4 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Google (S3) - US East5 (Columbus) region - Google (S3) - US South1 (Dallas) region |
2.9.3 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Google (S3) - EU Southwest1 (Madrid) region - Google (S3) - EU West9 (Paris) region - Wasabi (S3) - AP Southeast 1 (Singapore) region |
2.9.2 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Wasabi (S3) - AP Southeast 2 (Sydney) region - Wasabi (S3) - EU Central 2 (Frankfurt) region - Wasabi (S3) - CA Central 1 (Toronto) region |
2.8.8 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Amazon (S3) - Asia Pacific (Jakarta) region - Google (S3) - Asia South2 (Delhi) region - Google (S3) - Australia-Southeast2 (Melbourne) region - Google (S3) - NorthAmerica Northeast2 (Toronto) region - Quantum Active Archive and ActiveScale Systems - Standard (S3) - Quantum Active Archive and ActiveScale Systems - Glacier (S3) - Wasabi (S3) - EU-West-2 (Paris) region |
2.8.7 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Amazon Glacier Instant Retrieval (IR) - Amazon GovCloud - Glacier Instant Retrieval (IR) |
2.8.6 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Veritas NetBackup Recovery Vault Azure - Veritas NetBackup Recovery Vault Azure Government |
2.8.5 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Wasabi Hot Cloud Storage (S3) |
2.8.4 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Google (S3) - Asia-Northeast3 (Seoul) region - Google (S3) - Asia-Southeast2 (Jakarta) region - Google (S3) - EU-Central2 (Warsaw) region - IBM (S3) - Amsterdam, Netherlands region - IBM (S3) - Chennai, India region - IBM (S3) - EU Germany region - IBM (S3) - Hong Kong S.A.R. of the PRC region - IBM (S3) - Mexico City, Mexico region - IBM (S3) - Milan, Italy region - IBM (S3) - Montreal, Canada region - IBM (S3) - Oslo, Norway region - IBM (S3) - Paris, France region - IBM (S3) - San Jose, US region - IBM (S3) - Sao Paulo, Brazil region - IBM (S3) - Seoul, South Korea region - IBM (S3) - Singapore region - Nutanix Objects (S3) - updated provider portal URL Added in NetBackup 9.1 release: - Amazon (S3) - US East (N. Virginia FIPS 140-2) region - Amazon (S3) - US East (Ohio FIPS 140-2) region - Amazon (S3) - US West (Northern California FIPS 140-2) region - Amazon (S3) - US West (Oregon FIPS 140-2) region |
2.8.3 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- IBM (S3) - AP Osaka region - Seagate Lyve Cloud (S3) |
2.8.2 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- IBM (S3) - AP Australia region - IBM (S3) - AP Tokyo region - Corrected entry for XSKY Enterprise Object Storage (S3) - Corrected region name: IBM (S3) - AP United Kingdom - Removed decomissioned region: IBM (S3) - AUS Melbourne Added earlier support not included in NetBackup 9.0 release: - Google (S3) - US-West3 (Salt Lake City) region - Google (S3) - US-West4 (Las Vegas) region |
2.8.1 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | - Dell EMC Isilon PowerScale (S3)
- XSKY Enterprise Object Storage (S3) Added earlier support not included in NetBackup 9.0 release: - Tencent Cloud - Cloud Object Storage (COS) (S3) |
2.7.3 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Tencent Cloud - Cloud Object Storage (COS) (S3) |
2.7.2 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Google (S3) - US-West3 (Salt Lake City) region - Google (S3) - US-West4 (Las Vegas) region |
2.7.1 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added earlier support not included in NetBackup 8.3 release:
- Amazon (S3) - Africa (Cape Town) region - Amazon (S3) - Asia Pacific (Hong Kong) region - Amazon (S3) - Europe (Milan) region - Amazon (S3) - Europe (Stockholm) region - Amazon (S3) - Middle East (Bahrain) region - Google (S3) - Asia-East2 region - Google (S3) - Asia-Northeast2 region - Google (S3) - Asia-South1 region - Google (S3) - EU-North1 region - Google (S3) - EU-West4 region - Google (S3) - EU-West6 region - Google (S3) - NorthAmerica-Northeast1 region - Google (S3) - SouthAmerica-East1 region - Google (S3) - US-West2 region - Hitachi Vantara Cloud Scale (S3) - Nutanix Buckets (S3) - Orange Business Systems Flexible Engine OBS (S3) - SandStone MOS (S3) - SwiftStack Object Storage (S3) buffer size changes |
2.6.4 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Amazon (S3) - Africa (Cape Town) region - Amazon (S3) - Europe (Milan) region - Amazon (S3) - Europe (Stockholm) region - Hitachi Vantara CloudScale (S3) buffer size changes |
2.6.3 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Hitachi Vantara CloudScale (S3) |
2.6.2 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Amazon (S3) - Asia Pacific (Hong Kong) region - Amazon (S3) - Middle East (Bahrain) region - Google (S3) - Asia-East 2 region - Google (S3) - Asia-Northeast 2 region - Google (S3) - EU-West 6 region - Orange Business Systems Flexible Engine OBS (S3) - SandStone MOS (S3) - SwiftStack Object Storage (S3) buffer size changes |
2.6.1 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Google (S3) - Asia-South1 region - Google (S3) - EU-North1 region - Google (S3) - EU-West4 region - Google (S3) - NorthAmerica-Northeast1 region - Google (S3) - SouthAmerica-East1 region - Google (S3) - US-West2 region Added earlier support not included in NetBackup 8.2 release: - Nutanix Buckets (S3) |
Cloud Configuration File Versions released with NetBackup and NetBackup Appliances
NetBackup / NetBackup Appliance version | Cloud Configuration File version |
8.3.0.2 | 2.7.1 |
8.3.0.1/3.3.0.1 | 2.7.1 |
8.3 | 2.7.0 |
8.2 / 3.2 | 2.6.0 |
Cloud Configuration File Versions included in NetBackup Appliance cloud configuration and device mappings RPMs
NetBackup Appliance RPM version | Cloud Configuration File version |
1.0.6 | 2.5.2 |
1.0.5 | 2.5.1 |
1.0.4 | 2.4.5 |
1.0.3 | 2.4.4 |
1.0.2 | 2.4.3 |
1.0.1 | 2.4.1 |
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
OST Secondary Storage Solutions - General Information for Server | Back to top |
This feature is not supported on this platform.
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
Cloud Storage Solutions for Server | Back to top |
- NetBackup Cloud Storage plug-ins enable Veritas NetBackup to access Cloud Storage Solutions. Either the storage vendor or Veritas provides a software plug-in, which is installed on each NetBackup Media Server that is connected to the cloud solution.
- NetBackup Cloud support information is listed in the tables below, organized by vendor. These tables provide information on supported versions of plug-ins and functionality, and other important notes about the hardware and its compatibility.
Cloud Storage - Considerations
Subject | Notes |
Support assumptions | For details on supported operating systems, please refer to the
"NetBackup 8.0 - 8.x.x Operating System Software Compatibility List"
.
1. In the vendor compatibility tables below, the column "NetBackup Version Containing Plug-in" indicates the NetBackup version (8.2 or later) at which that cloud storage solution was first supported. 2. Cloud support on Windows platforms requires Windows 2008 R2 or later. 3. Community-distributed Ceph solutions are supported when using the Red Hat string. Since these solutions rely on the community, support for any issues encountered may be delayed or unavailable, depending on the nature of the issue. 4. NetBackup supports AWS Outposts. For more information, please refer https://www.veritas.com/news-releases/2019-12-03-veritas-tested-and-validated-for-aws-outposts. |
Configuration considerations | 1. NetBackup is configured to trust a number of well-known public Certificate Authorities (CA) related to Cloud storage.
However, there are instances where, for internal purposes, you may need to add your own self-signed CA certificate.
For information on adding a self-signed CA certificate, please refer to
"Cloud Storage Configuration: How To Add a Self-Signed CA Certificate"
.
2. NetBackup-provided Cloud connectors are not supported with IPv6, unless noted otherwise. Configuring these plug-ins with IPv6 may result in unpredictable behavior. |
- NetBackup supports Cloud-based storage providers using a variety of technology methods, described below.
Contents (for details click on the checkbox) | ||
---|---|---|
S3 Storage | Swift Storage | Microsoft Azure Storage |
OST | Advanced Disk Targets | VTL |
Support for Workloads with Image Sharing in Cloud
- Image Sharing in Cloud is supported with either MSDP Direct Cloud Tiering or CloudCatalyst. Workload support is listed in the tables below.
Support for Image Sharing using MSDP Direct Cloud Tiering
- Image sharing using MSDP Direct Cloud Tiering is supported with any of the S3 cloud providers listed in the Vendor Compatibility tables below, and with Microsoft Azure Blob storage.
- MSDP Direct Cloud Tiering is supported with NetBackup 8.3 and later.
- For more information on image sharing using MSDP Direct Cloud Tiering, see "About Image Sharing using MSDP cloud".
Support for Image Sharing using CloudCatalyst
- Image sharing using CloudCatalyst is supported with any of the S3 cloud providers listed in the Vendor Compatibility tables below, and with Microsoft Azure Blob storage.
- For more information on image sharing using CloudCatalyst, see "About automated disaster recovery in cloud using CloudCatalyst".
Image Sharing in Cloud - Supported Workloads
Workload | NetBackup Start of Support | Notes |
Basic backups of files and folders | 8.2 | |
Bare Metal Restore (BMR) | Not supported | Duplication of images is supported. Restores can be done from another NetBackup media server. |
DB2 | 8.2 | |
Enterprise Vault | 8.2 | |
Hadoop | 8.2 | |
Hbase | 8.2 | |
Hyper-V | 8.2 | |
Informix | 8.2 | |
Lotus Notes | 8.2 | |
MariaDB | 8.2 | |
Microsoft Exchange Server | 8.2 | |
Microsoft SharePoint | 8.2 | |
Microsoft SQL Server | 8.2 | |
MySQL | 8.2 | |
NDMP | 8.2 | |
Nutanix | Not supported | Duplication of images is supported. Restores can be done from another NetBackup media server. |
OpenStack | Not supported | Duplication of images is supported. Restores can be done from another NetBackup media server. |
Oracle | 8.2 | |
Postgres | 8.2 | |
RHV | 8.2 | |
SAP | Not supported | Duplication of images is supported. Restores can be done from another NetBackup media server. |
Sybase | 8.2 | |
VMware | 8.2 |
Cloud Storage - Vendor Compatibility
Contents (for details click on the checkbox) | ||
---|---|---|
ACP | Alibaba | Amazon |
AT&T | Beijing XSKY | China Mobile |
China Telecom | Chunghwa Telecom | Cloudian |
Datish Systems (OpenDedup) | Dell EMC | Dell EMC Isilon |
Deutsche Telekom | Fujitsu | |
Hewlett Packard Enterprise | Hitachi Vantara | IBM |
Infoniqa | Kingsoft | Microsoft |
NEC | NetApp | NooBaa |
Nutanix | Oracle | Orange Business Services |
Quantum | Red Hat | Scality |
Seagate | StorReduce | SUSE |
SwiftStack | Telefonica | Tencent |
Veritas | Wasabi |
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
OST Storage Servers for Server | Back to top |
- OpenStorage Servers are intelligent storage devices that interface to NetBackup Media Servers via the Veritas OpenStorage (OST) API. The vendor supplying the Storage Server appliance provides a software plug-in, which is installed on each NetBackup Media Server that is attached to the OpenStorage Server.
- OST Storage Servers support information is listed below, organized by vendor. Under each vendor there are separate tables showing compatibility with NetBackup Appliances, with Linux/Windows operating systems, and with UNIX operating systems. The tables provide information on supported versions of plug-ins and functionality, and other important notes about the hardware and its compatibility. OST functionality is available on all supported NetBackup Media Server platforms. If you do not see OST support for your desired Storage Server appliance / Media Server OS platform, please contact that Storage Server appliance vendor to request OST support for that platform. Please see the Veritas NetBackup Administrator's Guide for more information on how to use OST.
OST Storage Servers - Considerations
Subject | Notes |
Support assumptions | For details on supported operating systems, please refer to the
"NetBackup 8.0 - 8.x.x Operating System Software Compatibility List"
.
1. All OpenStorage Servers are compatible with the NetBackup Data Protection Optimization Option features (Storage Lifecycle Policies, Intelligent Disk Capacity Management and Media Server Load Balancing) and the SAN Client (currently supported only with Solaris SPARC and Linux x64 media servers). 2. Where support is shown for NetBackup 5200 Series or 5300 Series Appliances it means that the OST solution is supported on appliances running versions 3.2 or later, unless noted otherwise. 3. Where support is shown for "Windows Server 2008 Enterprise Edition" it also means that the other editions of Windows Server 2008 and Windows Server 2008 R2 are supported. Only the x64 (64-bit) editions of the OS are supported as a NetBackup Media Server. Server Core Installation Option is not supported as a NetBackup Media Server. 4. Where support is shown for "Windows Server 2012 Datacenter" it also means that the other editions of Windows Server 2012, Windows Storage Server 2012, Windows Server 2012 R2, and Windows Storage Server 2012 R2 are supported. 5. Where support is shown for "Windows Server 2016 Datacenter" it also means that the other editions of Windows Server 2016 and Windows Storage Server 2016 are supported. 6. Where support is shown for "Windows Server 2019 Datacenter" it also means that the other editions of Windows Server 2019 are supported. 7. CentOS and Oracle Linux are not supported with OpenStorage, unless noted otherwise. |
Vendor support considerations | 1. Veritas and OpenStorage server vendors have mutually agreed to support NetBackup customers with OST solutions.
Veritas and most OST server vendors are members of TSANet.
2. Veritas qualifies OpenStorage plug-ins for use with NetBackup. The qualified plug-ins are maintained by the party that writes and distributes the plug-ins. Features Veritas Partners implement behind the OST API, that operate independently and are transparent to NetBackup and the OpenStorage API (for example, replication between storage servers, deduplication on the storage server, deduplication-aware plug-ins, data transport mechanisms between the media server and the storage server), are not specifically qualified by Veritas. Partner-specific features designed to interoperate in the NetBackup environment as part of the total solution are the maintenance responsibility of the partner. Check the partner's compatibility list to ensure support of the feature with NetBackup and to ensure that your infrastructure (that is, hardware and network) meets the partner's recommended sizing considerations for the feature. 3. Check the device manufacturer's compatibility list to verify the minimum version of Storage Server software required for your Storage Server family member, that the Storage Server software version you are running is compatible with the plug-in version, and that the storage server software version supports the OpenStorage functionality you are running. 4. Minor versions of the plug-ins listed in the tables below are also supported. (Example: Version "2.0" means versions 2.0.1, 2.0.2, etc. are also supported. Version "3" means versions 3.1, 3.2, etc. are also supported.) |
Configuration considerations | 1. The Data Interface column in the tables below describes the supported data path between the media server running the vendor's OST plug-in and the OST storage server.
2. The Veritas NetBackup OpenStorage Optimized Duplication feature takes advantage of the replication capabilities built into many storage servers and cloud solutions by allowing images replicated by the storage servers or cloud solutions to be registered as duplicated copies in the NetBackup catalog. This feature requires at least one NetBackup Media Server with connectivity to both the source storage server or cloud solution and the destination storage server or cloud solution. Optimized Duplication cannot be performed across NetBackup domains. 3. A Logical Storage Unit (LSU) must be configured to only one NetBackup domain. Media servers from more than one NetBackup domain configured to the same LSU is not supported. |
Operational considerations | 1. Storage Servers that do not automatically increase the size of LSUs may take advantage of the LSU spanning feature.
For information about spanning volumes on OpenStorage disk pools, see the Veritas NetBackup OpenStorage Solutions Guide for Disk.
2. The NetBackup Accelerator, Accelerator with NDMP, and Accelerator with VMware-type policies features are not supported with spanned LSUs. |
Operating system support dropped |
1. CentOS 6 is not supported as a media server with NetBackup 9.0 and later.
2. Red Hat Enterprise Linux 6 is not supported as a media server with NetBackup 9.0 and later. 3. Solaris (all versions) on SPARC and x86-64 will not be supported as a media server with NetBackup 10.0 and later. 4. SUSE Linux Enterprise Server 11 is not supported as a media server with NetBackup 8.3 and later. 5. SUSE Linux Enterprise Server 12 GA through SP2 are not supported as a media server with NetBackup 8.3 and later. 6. Windows 2008 and 2008 R2 are not supported by Microsoft as of January 14, 2020. |
- The following table lists NetBackup OpenStorage functionality and indicates the NetBackup 8.x version at which that functionality was first supported. For detailed descriptions of OpenStorage functionality, see the "NetBackup OpenStorage Solutions Guide for Disk".
- To see which OST functionality is supported with your OpenStorage solution, refer to the "Supported OpenStorage Functionality" column in the Vendor Compatibility tables below.
OpenStorage Functionality | Abbreviation | NetBackup Start of Support | Notes |
Accelerator (for files and folders) | Accelerator | 8.0 GA | If your storage server shows support for Accelerator in the tables below, Veritas recommends updating your device mappings file to the current version to ensure this functionality is enabled.
If you are running Accelerator-enabled backups of Windows clients whose file systems contain hard linked files, running NetBackup 7.5.0.7 or later on the client is strongly recommended. For more information, see "Accelerator enabled backups of Windows hard linked files to OpenStorage disk storage may cause bptm to crash" . Accelerator is not supported with spanned Logical Storage Units (LSU). |
Accelerator with NDMP | Accel_NDMP | 8.0 GA | Supported with Dell EMC Isilon Scale-Out NAS filers, and NetApp AFF, FAS, and V series filers.
For more information on this feature, see the "About NetBackup Accelerator for NDMP" . Accelerator with NDMP is not supported with spanned LSUs. |
Accelerator with Hyper-V-type policies | Accel_Hyper-V | 8.0 GA | If your storage server shows support for Accelerator with Hyper-V in the tables below, Veritas recommends updating your device mappings file to the current version to ensure this functionality is enabled.
Accelerator with Hyper-V-type policies is not supported with spanned LSUs. Accelerator with Hyper-V-type policies is not supported with shared virtual disks and VHD sets. Accelerator with Hyper-V-type policies support requires Hyper-V Server 2016 or later. For more information on this feature, see the "Veritas NetBackup for Hyper-V Administrator's Guide" . |
Accelerator with VMware-type policies | Accel_VMware | 8.0 GA | If your storage server shows support for Accelerator with VMware in the tables below, Veritas recommends updating your device mappings file to the current version to ensure this functionality is enabled.
Accelerator with VMware-type policies is not supported with spanned LSUs. For more information on this feature, see the "Veritas NetBackup for VMware Administrator's Guide" . |
Auto Image Replication | A.I.R. | 8.0 GA | For more information on configuring Auto Image Replication, see
"About the storage lifecycle policies required for Auto Image Replication"
.
Veritas recommends replicating images from NetBackup 8.0 or later storage servers to target storage servers running the same NetBackup version. Replicating images between NetBackup 8.0 or later storage servers and NetBackup 7.x storage servers is supported, however, due to differences in encryption and fingerprinting methods, the additional processing required may cause performance issues and causes the replicated image data to be unencrypted while in transit. In configurations running both A.I.R. and Targeted A.I.R., Veritas recommends setting the Storage Lifecycle Policies parameter "Auto create A.I.R. import SLP" to "No" and creating non-Targeted A.I.R. import policies only where desired. Only one media server should be configured to each target Logical Storage Unit (LSU). Each source and target storage server should have its credentials configured in only one NetBackup domain. |
Targeted Auto Image Replication | Targeted_A.I.R. | 8.0 GA | If your storage server shows support for Targeted A.I.R. in the tables below, Veritas recommends updating your device mappings file to the current version to ensure this functionality is enabled.
Veritas recommends replicating images from NetBackup 8.0 or later storage servers to target storage servers running the same NetBackup version. Replicating images between NetBackup 8.0 or later storage servers and NetBackup 7.x storage servers is supported, however, due to differences in encryption and fingerprinting methods, the additional processing required may cause performance issues and causes the replicated image data to be unencrypted while in transit. In configurations running both A.I.R. and Targeted A.I.R., Veritas recommends setting the Storage Lifecycle Policies parameter "Auto create A.I.R. import SLP" to "No" and creating non-Targeted A.I.R. import policies only where desired. Only one media server should be configured to each target Logical Storage Unit (LSU). Each source and target storage server should have its credentials configured in only one NetBackup domain. When support for Targeted A.I.R. is shown in the tables below, all replication topologies are supported, unless noted otherwise. |
Direct Copy to dedicated tape drives | Direct_Copy | 8.0 GA | |
Direct Copy to shared tape drives | Direct_Copy_Shared | 8.0 GA | |
Granular Recovery Technology | Granular_Recovery | 8.0 GA | Support for the Veritas NetBackup OpenStorage Granular Recovery Technology feature is described in "Granular Restore Technology (GRT) support for NetBackup with PureDisk (PDDO/PDDE)" and "Granular Restore Technology (GRT) support for NetBackup with 3rd-party OpenStorage Secondary Storage Solutions" . |
Granular Recovery Technology with VMware-type policies | GRT_VMware | 8.0 GA | Support for VMware-type backup policies with Application Protection options enabled for Exchange or SharePoint. Support for the Veritas NetBackup OpenStorage Granular Recovery Technology feature is described in "Granular Restore Technology (GRT) support for NetBackup with PureDisk (PDDO/PDDE)" and "Granular Restore Technology (GRT) support for NetBackup with 3rd-party OpenStorage Secondary Storage Solutions" . |
Immutable Data / WORM | WORM | 8.3.0.1 | When support for immutable data/WORM (Write Once Read Many) is shown in the tables below, basic backup/restore, duplication, A.I.R. and Targeted A.I.R. using WORM are supported.
Data Immutability/WORM is supported with Client Direct with NetBackup 9.1 and later. |
Instant Recovery for VMware | IR_VMware | 8.0 GA | Support for restoring virtual machines with Instant Recovery is described in the "Veritas NetBackup for VMware Administrator's Guide" . For details on supported platforms for instant recovery restore hosts, see "Support for NetBackup 7.7.x, 8.x, and 9.x in virtual environments" . |
NetBackup Encryption Key Management Service | KMS | 8.0 GA | In the OST Cloud vendor tables, KMS indicates that the cloud provider supports using NetBackup KMS to encrypt backups to cloud targets. In the OST Storage Servers vendor tables, KMS indicates that the plug-in supports NetBackup KMS with Direct Copy to Tape functionality. |
Optimized Duplication | Opt_Dup | 8.0 GA | Optimized Duplication transfers data in 256 KB chunks. |
Optimized Duplication (Whole Image Copy) | WI_Opt_Dup | 8.0 GA | Whole image Optimized Duplication uses the storage unit's Maximum fragment size to transfer an entire NetBackup image fragment in a single operation. |
Optimized Synthetics | Opt_Synth | 8.0 GA | Storage Lifecycle Policies are not supported in policies that use the multiple copy synthetic backups method. For details, see "Storage lifecycle policies are not supported in policies that use the multiple copy synthetic backups method" . |
- More information on NetBackup OpenStorage solutions is available at the following OST Storage Server vendors' websites.
Vendor | URL |
Cleversafe | http://www.cleversafe.com/ |
Data Domain | http://www.datadomain.com/products/ |
Dell EMC | http://www.dell.com/ |
ExaGrid | https://www.exagrid.com/exagrid-products/supported-data-backup-applications/veritas-netbackup/ |
FalconStor | http://www.falconstor.com/en/pages/?pn=VTL |
Fujitsu | http://www.fujitsu.com/global/ |
Hewlett Packard Enterprise | https://www.hpe.com/us/en/storage/storeonce.html |
Hitachi Vantara | https://www.hitachivantara.com/en-us/home.html |
H3C | http://www.h3c.com/en/OurBusiness/Products/Storage/ |
IBM | http://www.ibm.com/ |
Infinidat | http://www.infinidat.com/ |
NEC | http://www.necam.com/HYDRAstor/ |
NetApp | http://www.netapp.com/us/products/protection-software/altavault/ |
Oracle | http://www.oracle.com/technetwork/server-storage/sun-unified-storage/downloads/zfssa-plugins-1489830.html |
Quantum | http://www.quantum.com/ServiceandSupport/SoftwareandDocumentationDownloads/OSTClientPlugIn/Index.aspx |
Quest | https://www.quest.com/products/dr-series-disk-backup-appliances/ |
Sepaton | http://www.sepaton.com/ |
Veritas | https://www.veritas.com/product/backup-and-recovery/netbackup-appliances/ |
OST Storage Servers - Vendor Compatibility
Contents (for details click on the checkbox) | ||
---|---|---|
Dell EMC Data Domain | Fujitsu | Hewlett Packard Enterprise |
Infinidat | NEC | Quantum |
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
Virtual Tape Libraries Compatibility List for Server | Back to top |
- Virtual tape device support information is listed below, organized by vendor. Under each vendor there are separate tables showing compatibility with NetBackup Appliances, with Linux/Windows operating systems, and with UNIX operating systems. The tables provide information on supported versions of software, inquiry string (vendor ID + product ID), and other important notes about the hardware and its compatibility.
Virtual Tape Libraries/Drives - Considerations
Subject | Notes |
Support assumptions | For details on supported operating systems, please refer to the
"NetBackup 8.0 - 8.x.x Operating System Software Compatibility List"
.
1. Virtual tape device software versions are no longer listed in this section. Veritas recommends using the most recent version of software available when you configure the VTL with NetBackup. When a minimum VTL software version is required, it will be listed in a footnote. If a VTL software version is causing a problem, Veritas will work with the hardware vendor to resolve the problem. Veritas and most hardware vendors listed are members of TSAnet. 2. Where support is shown for "Windows Server 2008 Enterprise Edition" it also means that the other editions of Windows Server 2008 and Windows Server 2008 R2 are supported. Only the x64 (64-bit) editions of the OS are supported as a NetBackup Media Server. Server Core Installation Option is not supported as a NetBackup Media Server. 3. Where support is shown for "Windows Server 2012 Datacenter" it also means that the other editions of Windows Server 2012, Windows Storage Server 2012, Windows Server 2012 R2, and Windows Storage Server 2012 R2 are supported. 4. Where support is shown for "Windows Server 2016 Datacenter" it also means that the other editions of Windows Server 2016 and Windows Storage Server 2016 are supported. 5. Where support is shown for "Windows Server 2019 Datacenter" it also means that the other editions of Windows Server 2019 are supported. 6. Where support is shown for "Red Hat Enterprise Linux 6 on x86-64" it also means that CentOS 6 and Oracle Linux 6 are supported. 7. Where support is shown for "Red Hat Enterprise Linux 7 on x86-64" it also means that CentOS 7 and Oracle Linux 7 are supported. |
Vendor support considerations | 1. Check the device manufacturer's compatibility list to verify OS platform support for the version of software running on your VTL.
2. Check the device manufacturer's compatibility list to verify the minimum version of VTL software required for your VTL family member. 3. The list of attributes for each drive emulation is based on the most recent version of Virtual tape device software tested. Check with the device manufacturer to determine when support for a specific attribute was added. |
Configuration considerations | 1. The virtual library must be configured with the unique VTL inquiry string as listed.
Using the inquiry string to emulate a real library model is not supported even if the real device is supported with NetBackup.
2. Only the virtual tape drive emulations listed with each virtual library are supported. Other virtual tape drive emulations are not supported even if the real device being emulated is supported with NetBackup. Conversely, a virtual tape drive emulation listed as supported in this section does not mean the physical model is also supported. 3. Veritas recommends the use of SCSI Persistent Reserve (SPR) whenever all the hardware in your device path supports it. Refer to the NetBackup Administrator's Guide for more information on SPR and the types of configurations where SPR may be more effective than the default SPC-2 SCSI reserve and release method. 4. NetBackup NDMP Direct Copy with VTL enables NDMP tape duplication to physical tape libraries. For more information on this feature, see "About NDMP DirectCopy" . |
OS library and tape driver considerations | 1. Refer to the Tape Drives section of this document for information on supported tape drivers. |
Operational considerations | 1. Filling up the available disk space on a virtual device may cause unpredictable behavior of the device.
Working with the device vendor may be required to recover from errors that result from a full disk.
2. NetBackup NDMP Direct Copy with VTL Copying virtual media to physical media or a 2nd virtual media is not supported by Veritas; any support for this must come from the VTL vendor providing the capability. If the VTL copies virtual media to physical media (or a 2nd VTL), NetBackup is not aware of the physical media or 2nd virtual media and may not be able to recover that data directly from it. 3. When NetBackup expires a virtual volume, the virtual device is not aware that the data is no longer needed. Because of this, the virtual device may appear to be much closer to capacity than it really is. When NetBackup subsequently begins writing to that virtual volume at the beginning of the volume, the virtual library will then be aware that the rest of the data is no longer needed and can free up the disk space. |
Operating system support dropped |
1. CentOS 6 is not supported as a media server with NetBackup 9.0 and later.
2. Red Hat Enterprise Linux 6 is not supported as a media server with NetBackup 9.0 and later. 3. Solaris (all versions) on SPARC and x86-64 will not be supported as a media server with NetBackup 10.0 and later. 4. SUSE Linux Enterprise Server 11 is not supported as a media server with NetBackup 8.3 and later. 5. SUSE Linux Enterprise Server 12 GA through SP2 are not supported as a media server with NetBackup 8.3 and later. 6. Windows 2008 and 2008 R2 are not supported by Microsoft as of January 14, 2020. |
Virtual Tape Libraries/Drives - Tape Drive Emulation Attributes
- The following table lists attributes supported with Virtual Tape Libraries and indicates the NetBackup version (8.2 or later) at which that attribute was first supported.
Attribute | Abbreviation | NetBackup 8.2 (or later) Start of Support |
NDMP Direct Copy with VTL, physical tape drives used with this feature must be dedicated to the VTL. | DirCpy_Ded | 8.2 |
NDMP Direct Copy with VTL, physical tape drives used with this feature can be shared using NetBackup Shared Storage Option (SSO). | DirCpy_Shr | 8.2 |
SCSI Reservation | SResv | 8.2 |
SCSI Persistent Reservation | SPR | 8.2 |
Write Once, Read Many | WORM | 8.2 |
NetBackup Encryption Key Management Service | KMS | 8.2 |
Append-only mode | Append | 8.2 |
Virtual Tape Libraries/Drives - NetBackup Robot Types
- Most Virtual Tape Libraries use the NetBackup robot type TLD. The following table lists operating system platform support for TLD robots. For supported OS versions, refer to the "NetBackup 8.0 - 8.x.x Operating System Software Compatibility List".
- A few Virtual Tape Libraries use NetBackup robot type ACS. For information on ACS robotics support, see ACS - Oracle Automated Cartridge System in the Tape Libraries section.
- For more information about configuring robot types, see the "NetBackup Device Configuration Guide".
TLD - Tape Library DLT
Operating System | NetBackup 8.2 (or later) Start of Support |
NDMP | 8.2 |
SUSE Linux Enterprise Server on x86-64 | 8.2 |
Virtual Tape Libraries/Drives - Vendor Compatibility
Contents (for details click on the checkbox) | ||
---|---|---|
Dell EMC | Dell EMC Data Domain | FalconStor |
Fujitsu | H3C | Hewlett Packard Enterprise |
Huawei | IBM | Infinidat |
Quantum | Spectra Logic |
NDMP Devices Compatibility List for Server | Back to top |
- NDMP device support information is listed below, organized by vendor. The tables provide information on the versions of software tested, supported connection methods and functionality, and other important notes about the hardware and its compatibility.
- For information about Operating Systems supported with NDMP, see the NDMP column in the NetBackup Server section for each OS platform in the "NetBackup 8.0 - 8.x.x Operating System Software Compatibility List".
- For NetBackup for NDMP vendor-specific configuration information, refer to "NetBackup for NDMP: NAS appliance information".
- Minor ("double-dot") or patch versions of the software listed in the tables below are also supported. (Example: "v5.0" means versions v5.0.1, v5.0.2, etc. are also supported.)
- Direct Access Restore (DAR) and Directory Direct Access Restore (DDAR) are supported, unless noted otherwise.
- NetBackup Appliances and NetBackup Virtual Appliances are supported with the NDMP solutions listed in the tables below. For more information on supported appliance versions, see the "Supported Functionality" subsection under "NetBackup Appliances".
- IPv6 support is shown in the tables below.
- 64-bit inode numbers are supported.
- Wildcard characters can be used in regular expressions or the directive ALL_FILESYSTEMS to specify path names in NDMP policy backup selections. For more information on the use of wildcard characters, see the "Wildcard characters in backup selections for an NDMP policy".
NDMP Devices - Connection Methods
- The following table describes the supported NDMP connection methods.
Connection Method | Description |
Direct-attach | Data travels from disk to a tape device on the same NDMP host, or from disk to tape device on a SAN. Backup data is NOT sent over local network. NOTE: The tape drives must be in NDMP-type storage units. |
Remote | Data travels from the NDMP host, across the local network to a NetBackup media server, to a storage unit connected to the NetBackup media server. |
3-way | Data travels from disk on an NDMP host to a tape device on another NDMP host. Backup data is sent over the local network. NOTE: The tape drives must be in NDMP-type storage units. |
NDMP Devices - Vendor Compatibility
Contents (for details click on the checkbox) | ||
---|---|---|
Dell EMC | Dell EMC Data Domain | Dell EMC Isilon |
Fujitsu | Hewlett Packard Enterprise | Hitachi Vantara |
Huawei | IBM | Imation |
Lenovo | Mirapoint | NEC |
NetApp | Nexenta | Oracle |
Stratus Technologies |
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
Tape Libraries Compatibility List for Server | Back to top |
- Tape library support information is listed below. This information is organized by vendor and provides information on the inquiry string (vendor ID + product ID), the method(s) of controlling the robot, and any other important notes about the hardware and its compatibility.
Tape Libraries - Considerations
Subject | Notes |
Support assumptions | For details on supported operating systems, please refer to the
"NetBackup 8.0 - 8.x.x Operating System Software Compatibility List"
.
1. The tables in this section show robotic support only, not tape drive support. Refer to the Tape Drives section of this document to ensure that the specific drive used in the library is supported on the desired OS platform(s). The library vendor must also support the library and drive combination. 2. Firmware versions are not listed in this section. Veritas recommends using the most recent version of firmware available when you configure the library with NetBackup. When a minimum firmware version is required, it will be listed in the Notes column. If a firmware version is causing a problem, Veritas will work with the hardware vendor to resolve the problem. Veritas and most hardware vendors listed are members of TSANet. 3. ACS robots are supported with NetBackup Enterprise Server only. ACS robots are not supported with NetBackup Server. 4. For ACS robots the "Inquiry String" column is intentionally left blank. 5. Where support is shown for "Red Hat Enterprise Linux" it also means that CentOS and Oracle Linux are supported. |
Configuration considerations | 1. Library partitioning is supported unless noted otherwise.
2. Library expansion modules are supported unless noted otherwise. 3. Configuring persistent robotic paths for Linux media servers is supported with NetBackup 8.3 and later. To enable this functionality, you can download a Linux rules file from the Veritas Support Downloads Center . When the downloaded rules file is installed in the specified directory, NetBackup uses /dev/tape/by-path type paths that persist across SAN interruptions. If this rules file is not present, NetBackup continues to use the /dev/sg type paths. |
Operating system support dropped |
1. CentOS 6 is not supported as a media server with NetBackup 9.0 and later.
2. Red Hat Enterprise Linux 6 is not supported as a media server with NetBackup 9.0 and later. 3. Solaris (all versions) on SPARC and x86-64 will not be supported as a media server with NetBackup 10.0 and later. 4. SUSE Linux Enterprise Server 11 is not supported as a media server with NetBackup 8.3 and later. 5. SUSE Linux Enterprise Server 12 GA through SP2 are not supported as a media server with NetBackup 8.3 and later. 6. Windows 2008 and 2008 R2 are not supported by Microsoft as of January 14, 2020. |
Tape Libraries - NetBackup Robot Types
- These tables list operating system platform support for each NetBackup robotic daemon type. For more information about configuring robot types, see the "NetBackup Device Configuration Guide".
Contents (for details click on the checkbox) | ||
---|---|---|
ACS - Oracle Automated Cartridge System - Supported Operating Systems | ACS - Oracle Automated Cartridge System - Supported Drive Types | ACS - Oracle Automated Cartridge System - Supported Media Types |
TLD - Tape Library DLT - Supported Operating Systems |
Tape Libraries - Legend
- The following table describes terms and symbols used in the Tape Libraries - Vendor Compatibility tables.
Tape Libraries - Legend
Value | Meaning |
Multi LUN | The device is a Multi-LUN based library. |
SCSI ID | The device is a SCSI ID based library. |
^ | Character used to denote a space in the INQUIRY STRING. |
Tape Libraries - Vendor Compatibility
Contents (for details click on the checkbox) | ||
---|---|---|
Dell EMC | Fujitsu | H3C |
Hewlett Packard Enterprise | Hitachi Vantara | IBM |
NEC | Oracle | Overland Storage |
Qualstar | Quantum | Spectra Logic |
Tandberg |
Tape Drives Compatibility List for Server | Back to top |
- Tape drive support information is listed below, organized by vendor. Under each vendor there are separate tables showing compatibility with NetBackup Appliances, with Linux/Windows operating systems and with UNIX operating systems. These tables provide information on the operating system versions supported by the drive, inquiry string (vendor ID + product ID), and other important notes about the hardware and its compatibility.
Subject | Notes |
Support assumptions | For details on supported operating systems, please refer to the
"NetBackup 8.0 - 8.x.x Operating System Software Compatibility List"
.
1. To ensure support, a device (both drive and library where applicable) must be supported by Veritas, the device manufacturer, and the operating system vendor. 2. Firmware versions are not listed in this section. Veritas recommends using the most recent version of firmware available when you configure the drive with NetBackup. When a minimum firmware version is required, it will be listed in the footnotes. If a firmware version is causing a problem, Veritas will work with the hardware vendor to resolve the problem. Veritas and most hardware vendors listed are members of TSANet. 3. Where support is shown for "Windows Server 2008 Enterprise Edition" it also means that the other editions of Windows Server 2008 and Windows Server 2008 R2 are supported. Only the x64 (64-bit) editions of the OS are supported as a NetBackup Media Server. Server Core Installation Option is not supported as a NetBackup Media Server. 4. Where support is shown for "Windows Server 2012 Datacenter" it also means that the other editions of Windows Server 2012, Windows Storage Server 2012, Windows Server 2012 R2, and Windows Storage Server 2012 R2 are supported. 5. Where support is shown for "Windows Server 2016 Datacenter" it also means that the other editions of Windows Server 2016 and Windows Storage Server 2016 are supported. 6. Where support is shown for "Windows Server 2019 Datacenter" it also means that the other editions of Windows Server 2019 are supported. 7. Where support is shown for "Red Hat Enterprise Linux 6 on x86-64" it also means that CentOS 6 and Oracle Linux 6 are supported. 8. Where support is shown for "Red Hat Enterprise Linux 7 on x86-64" it also means that CentOS 7 and Oracle Linux 7 are supported. 9. The "ULTRIUM-TD" and the "ULT3580-TD" inquiry strings are interchangeable (both are supported), unless noted otherwise. The "ULTRIUM-HH" and the "ULT3580-HH" inquiry strings are interchangeable (both are supported), unless noted otherwise. 10. Backup Exec Tape Reader is not supported in NetBackup 8.0 and later releases. |
Vendor support considerations | 1. The list of attributes for each tape drive is based on the most recent drive testing. Check with the device manufacturer to determine the firmware version at which support for a specific attribute was added. |
Configuration considerations | 1. Veritas recommends the use of SCSI Persistent Reserve (SPR) whenever all the hardware in your device path supports it.
Refer to the NetBackup Administrator's Guide for more information on SPR and the types of configurations where SPR may be more effective than the default SPC-2 SCSI reserve and release method.
2. Only tape drives listed in the tables below are supported. Other tape drive models are not supported even if the Virtual Tape Library section shows an emulated version of the drive is supported with NetBackup. 3. For Solaris 10, Veritas recommends running Update 6 (137137-09 for SPARC, 137138-09 for x64) or later. |
OS tape driver considerations | 1. Except where noted, Veritas recommends the use of the operating system's native tape drivers. |
Operational considerations | 1. Tape Alert functionality is supported by all drives, unless noted otherwise.
2. NetBackup supports LTO-7 Type M media, also known as M8 cartridges (LTO-7 cartridges formatted to a new LTO-8 standard, increasing their native capacity), in the following manner: - M8 cartridges are supported with LTO-8 tape drives. - M8 cartridges pre-formatted by the media vendor are supported. - LTO-7 cartridges with an M8 barcode formatted as M8 using hardware vendors' software tools or tape library firmware features (automatic or manual) are supported. - NetBackup does not have the ability to convert LTO-7 cartridges with an M8 barcode to M8 format. - For more information on M8 media (for example, formatting methods, supported barcodes, other technical information), please consult the vendor's documentation. 3. Uninitialized LTO-9 media is not supported with NetBackup. LTO-9 media must run a one-time characterization/optimization step to calibrate the tape before it can be used for backup. This process can take from 12 minutes to 2 hours. If a NetBackup job is assigned a brand new, uninitialized LTO-9 tape cartridge, the mount may time out and mark the assigned tape drive down. To avoid this scenario, you must initialize new LTO-9 cartridges before putting them into a NetBackup volume pool to use for backup. For more information on LTO-9 media initialization and mitigation solutions, consult the following vendor sites: "HPE StoreOpen Software Linux and Mac 3.5 User Guide - LTO-9 Media Initialization" "HPE StoreOpen Software 3.5 for Microsoft Windows User Guide - LTO-9 Media Initialization" "Oracle StorageTek SL150 Modular Tape Library - Library Support of LTO9 Tape Calibration" "Overland Tandberg NEO XL-Series LTO-9 New Media Initialization Technical Brief" "Quantum LTO-9 Media - Frequently Asked Questions (FAQ)" "Spectra Logic - LTO-9 Initialization for Media / LTO-9 Certified Media" |
Operating system support dropped |
1. CentOS 6 is not supported as a media server with NetBackup 9.0 and later.
2. Red Hat Enterprise Linux 6 is not supported as a media server with NetBackup 9.0 and later. 3. Solaris (all versions) on SPARC and x86-64 will not be supported as a media server with NetBackup 10.0 and later. 4. SUSE Linux Enterprise Server 11 is not supported as a media server with NetBackup 8.3 and later. 5. SUSE Linux Enterprise Server 12 GA through SP2 are not supported as a media server with NetBackup 8.3 and later. 6. Windows 2008 and 2008 R2 are not supported by Microsoft as of January 14, 2020. |
Tape Drives - Attributes
- The following table lists attributes supported with Tape Drives and indicates the NetBackup version (8.2 or later) at which that attribute was first supported.
Attribute | Abbreviation | NetBackup Release Supported |
SCSI Reservation | SResv | 8.2 |
SCSI Persistent Reservation | SPR | 8.2 |
Write Once, Read Many | WORM | 8.2 |
NetBackup Encryption Key Management Service | KMS | 8.2 |
Append-only mode | Append | 8.2 |
Tape Drives - Vendor Compatibility
Contents (for details click on the checkbox) | ||
---|---|---|
Dell EMC | Hewlett Packard Enterprise | IBM |
Oracle | Quantum |
Fibre Transport Media Server HBAs Compatibility List for Server | Back to top |
This feature is not supported on this platform.
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
Encryption and Security Solutions for Server | Back to top |
- Encryption and security solution support information is listed below, organized by solution type.
- The following listings do not include specific operating system compatibility. For a list of supported NetBackup Media Server platforms, refer to the "NetBackup 8.0 - 8.x.x Operating System Software Compatibility List".
NetBackup Key Management Service (KMS)
- The NetBackup Key Management Service (KMS) feature is intended to support any tape drive with built-in hardware encryption capability that conforms to the SCSI T10 encryption standard. Each drive model listed in the following table has been tested in Veritas labs to verify that it works with NetBackup correctly, so Veritas recommends using only listed drives with the KMS feature. Refer to the Tape Drives section in this document for the list of platforms and interfaces on which each of the following drives is supported.
- Note: KMS is supported on any tape library supported by NetBackup, provided the library vendor supports that library with any of the encryption-capable drives listed in the table below.
NetBackup KMS - Supported Devices
Manufacturer | Model | Notes |
Dell EMC | PowerVault LTO4-120 | |
Dell EMC | PowerVault LTO5-140 | |
Dell EMC | PowerVault LTO-6 | |
Dell EMC | PowerVault LTO-6 HH | |
Dell EMC | PowerVault LTO-7 | |
Dell EMC | PowerVault LTO-7 HH | |
Hewlett Packard Enterprise | Ultrium 1760 LTO4 | |
Hewlett Packard Enterprise | Ultrium 1840 LTO4 | |
Hewlett Packard Enterprise | Ultrium 3000 LTO5 | |
Hewlett Packard Enterprise | Ultrium 3280 LTO5 | |
Hewlett Packard Enterprise | Ultrium 6250 LTO6 | |
Hewlett Packard Enterprise | Ultrium 6650 LTO6 | |
Hewlett Packard Enterprise | Ultrium 15000 LTO7 | |
Hewlett Packard Enterprise | Ultrium 15750 LTO7 | |
Hewlett Packard Enterprise | Ultrium 30750 LTO8 | |
IBM | System Storage TS1040 Ultrium 4 | Requires firmware version 7BG2 or later. |
IBM | System Storage TS1050 Ultrium 5 | |
IBM | System Storage TS1060 Ultrium 6 | |
IBM | System Storage TS1070 Ultrium 7 | |
IBM | System Storage TS1120 (3592 Model E05) | Requires firmware version 1C15 or later. |
IBM | System Storage TS1130 (3592 Model E06) | Requires firmware version 2480 or later. |
IBM | System Storage TS1140 (3592 Model E07) | |
IBM | System Storage TS1150 (3592 Model E08) | |
IBM | System Storage TS1155 (3592 Model 55F) | |
IBM | System Storage TS2240 Ultrium 4 Half Height | |
IBM | System Storage TS2250 Ultrium 5 Half Height | |
IBM | System Storage TS2260 Ultrium 6 Half Height | |
IBM | System Storage TS2270 Ultrium 7 Half Height | |
IBM | System Storage TS2280 Ultrium 8 Half Height | |
IBM | System Storage TS2340 Ultrium 4 | Requires firmware version 7BG2 or later. |
IBM | System Storage TS2350 Ultrium 5 | |
IBM | System Storage TS2360 Ultrium 6 | |
IBM | System Storage TS2370 Ultrium 7 | |
IBM | System Storage TS2380 Ultrium 8 | |
IBM | Ultrium 4 (OEM) | Requires firmware version 7BG2 or later. |
IBM | Ultrium 4 Half Height (OEM) | |
IBM | Ultrium 5 (OEM) | |
IBM | Ultrium 5 Half Height (OEM) | |
IBM | Ultrium 6 (OEM) | |
IBM | Ultrium 6 Half Height (OEM) | |
IBM | Ultrium 7 (OEM) | |
IBM | Ultrium 7 Half Height (OEM) | |
IBM | Ultrium 8 (OEM) | |
IBM | Ultrium 8 Half Height (OEM) | |
Oracle StorageTek | T10000B | Requires firmware version 1.41.211 or later. |
Oracle StorageTek | T10000C | Requires firmware version 1.53.311 or later. The drive needs manual setup including obtaining the data path key management (DPKM) encryption license from Oracle. |
Oracle StorageTek | T10000D | |
Quantum | LTO-4 HH | Requires firmware version 2190 or later. |
Quantum | LTO-5 FH | |
Quantum | LTO-5 HH | |
Quantum | LTO-6 HH | |
Quantum | LTO-7 HH | |
Quantum | LTO-8 HH | |
Tandberg | HH LTO 5 |
- External Key Management Services (EKMS) servers using KMIP are supported with NetBackup 8.3 and later.
External KMS - Considerations
Subject | Notes |
Configuration considerations | 1. EKMS is supported with AdvancedDisk, Cloud, MSDP, MSDP Direct Cloud Tiering, and Tape storage solutions supported by NetBackup.
2. The EKMS server must be KMIP-based. Supported KMIP versions are 1.0, 1.1, 1.2, 1.3, 1.4 and 2.0. 3. NetBackup uses Symmetric Key objects stored on the EKMS server for data encryption. 4. The EKMS server must use PEM formatted certificate-based authentication. 5. The NetBackup primary server should be able to establish an outbound connection to the KMIP port on the EKMS server. |
External KMS - Supported Devices
Manufacturer | Model | EKMS server software version | KMIP version supported |
Fortanix | Data Security Manager (DSM) | 4.2 | 1.0, 1.1, 1.2, 1.3, 1.4 |
IBM | Security Key Lifecycle Manager (SKLM) | 2.6 | 1.0, 1.1, 1.2 |
IBM | Security Key Lifecycle Manager (SKLM) | 3.0 | 1.0, 1.1, 1.2, 1.3, 1.4, 2.0 |
Oracle | Key Vault | 12.1, 18.1, 18.2 | 1.0, 1.1 |
Thales | CipherTrust Manager K170, K170v, K470, K570 | 1.8 | 1.0, 1.1, 1.2, 1.3, 1.4 |
Thales | CipherTrust Manager K170, K170v, K470, K570 | 2.5 | 1.0, 1.1, 1.2, 1.3, 1.4 |
Thales | CipherTrust Manager K170, K170v, K470, K570 | 2.7 | 1.0, 1.1, 1.2, 1.3, 1.4 |
Thales | CipherTrust Manager K170, K170v, K470, K570 | 2.8 | 1.0, 1.1, 1.2, 1.3, 1.4 |
Thales | CipherTrust Manager K170, K170v, K470, K570 | 2.9 | 1.0, 1.1, 1.2, 1.3, 1.4 |
Thales | Gemalto-SafeNet KeySecure K150, K150v | 8.11 | 1.0, 1.1, 1.2, 1.3 |
Thales | Vormetric Data Security Manager (DSM) | 6.4 | 1.0, 1.1, 1.2, 1.3, 1.4, 2.0 |
Utimaco | Enterprise Secure Key Manager | 5.2 | 1.0, 1.1, 1.2, 1.3, 1.4, 2.0 |
- NetBackup 8.3 and later supports authentication via Single Sign-On with SAML. For more information, see Configure NetBackup for Single Sign-On (SSO) in the NetBackup Web UI Administrator's Guide.
Single Sign-On using SAML - Considerations
Subject | Notes |
Configuration considerations | 1. To use SSO, you must have a SAML 2.0 compliant identity provider configured in your environment.
2. Only one Active Directory (AD) or LDAP domain is supported for each primary server domain. This feature is not available for local domain users. 3. Configuration of the Identity Provider (IDP) requires the NetBackup APIs or the NetBackup command nbidpcmd. 4. SAML users cannot use the APIs. API keys are used to authenticate a user and therefore cannot be used with a SAML-authenticated user. 5. Global logout is not supported. |
Single Sign-On with SAML - Supported Solutions
Identity Provider | Link to configuration information |
ADFS | https://www.veritas.com/support/en_US/article.100047744 |
Microsoft Azure | https://www.veritas.com/support/en_US/article.100047748 |
Okta | https://www.veritas.com/support/en_US/article.100047745 |
PingFederate | https://www.veritas.com/support/en_US/article.100047746 |
Shibboleth | https://www.veritas.com/support/en_US/article.100047747 |
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
Third Party Encryption Solutions for Server | Back to top |
- Support information for vendor-supplied encryption solutions is listed below, organized by vendor. Under each vendor there is a table showing tested solutions, firmware versions tested with that solution, and other important notes about the solution and its compatibility.
- The firmware listed in these tables is the firmware that has been tested. Firmware versions newer than those listed are also supported.
- Support for specific storage devices such as tape drives, libraries, and virtual devices is not listed in this section. NetBackup will support any hardware that is supported both by the encryption provider and Veritas. Please refer to the other sections of this document for Veritas' support of these storage devices.
- Please Note:
- The firmware listed on this page is the firmware that has been tested. All firmware versions newer than what is listed are also supported.
Third-Party Encryption Solutions - Vendor Compatibility
Contents (for details click on the checkbox) | ||
---|---|---|
Brocade | Cisco Systems | Decru |
Fujitsu | Hewlett Packard Enterprise | IBM |
NEC | Quantum | SafeNet |
Sun StorageTek | Thales (NeoScale) |
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
SAN Media Server/SAN Client/FT Media Server for Server and Client | Back to top |
- • Unless otherwise noted the minimum NetBackup level for SAN Client support is NetBackup 6.5 GA.
- SAN style backups via SAN Media Server
-
SAN media servers are NetBackup media servers that back up their own data. SAN
media servers cannot back up data that resides on other clients.
SAN media servers are useful for certain situations. For example, a SAN media
server is useful if the data volume consumes so much network bandwidth that it
affects your network negatively.
• Enables LAN-free data protection with high performance access to shared resources.
• Can share tape resources with NetBackup Master and Media Servers.
• Can only back itself up, not other clients.
• Software is installed stand-alone on each cluster node and linked to the virtual host via an application cluster.
• When you define a backup policy for a SAN media server, add only the SAN media server as the client.
• The NetBackup Shared Storage Option is able to use NetBackup SAN media servers.
• There is no platform restriction regarding SAN Media Servers - any Media Server can be a SAN Media Server. The only difference is in the license authentication mechanism. Application and DB Agents are supported with the SAN Media Server.
- SAN style backups via SAN Client
-
A NetBackup SAN client is a NetBackup client on which the Fibre Transport service
is activated. The SAN client is similar to the SAN media server that is used for the
Shared Storage Option; it backs up its own data. However, the SAN client is based
on the smaller NetBackup client installation package, so it has fewer administration
requirements and uses fewer system resources.
• It connects to a NetBackup media server over Fibre Channel.
• The NetBackup SAN Client Fibre Transport Service manages the connectivity and the data transfers for the FT pipe on the SAN clients. The SAN client FT service also discovers FT target mode devices on the NetBackup media servers and notifies the FT Service Manager about them.
• Requires SAN connectivity with a Media Server running Fibre Transport Services (reference additional information below in regards to the FT Media Server).
SAN client does not support the following types of backup:
• SharePoint
• Enterprise Vault
• Exchange DAG or CCR backups through a passive node of an Exchange cluster
• All other application and database agents are supported with the SAN Client.
Note: SAN client does support the use of FlashBackup but all restores from FlashBackup backups will use the LAN connection, not the SAN connection.
- SAN client and NetBackup Deduplication
-
• SAN Client is a NetBackup optional feature that provides high speed backups and restores of NetBackup clients. Fibre Transport is the name of the NetBackup high-speed data transport method that is part of the SAN Client feature. The backup and restore traffic occurs over a SAN.
• SAN clients can be used with the deduplication option; however, the deduplication must occur on the media server, not the client. Configure the media server to be both a deduplication storage server (or load balancing server) and an FT media server. The SAN client backups are then sent over the SAN to the deduplication server/FT media server host. At that media server, the backup stream is deduplicated.
• Do not enable client deduplication on SAN Clients. The data processing for deduplication is incompatible with the high-speed transport method of Fibre Transport. Client-side deduplication relies on two-way communication over the LAN with the media server. A SAN client streams the data to the FT media server at a high rate over the SAN.
- FT Media Server
- A NetBackup FT media server is a NetBackup media server on which the Fibre Transport services are activated. NetBackup FT media servers accept connections from SAN clients and send data to the storage units. The host bus adapters (HBAs) that accept connections from the SAN clients use a special NetBackup target mode driver to process FT traffic. The media server FT service controls data flow, processes SCSI commands, and manages data buffers for the server side of the FT pipe. It also manages the target mode driver for the host bus adaptors.
- Reference the HCL document Fibre Transport Media Server HBAs section for supported Operating Systems and HBAs. https://www.veritas.com/content/support/en_US/article.100040093
- NetBackup Software Compatibility Documentation:
- NetBackup 8.0 - 8.x.x Operating System Software Compatibility List (last updated on March 11, 2024)
- 8.0 - 8.x.x OS Software Compatibility List Updates
Infrastructure Used for Testing for Server | Back to top |
- The NetBackup Shared Storage Option (SSO) hardware support model for Storage Area Network (SAN) components is an open model. In other words, all Fibre Channel over Ethernet (FCoE) converged network adapters (CNA), Fibre Channel (FC) host bus adapters (HBA), switches, bridges, and routers are supported in a SAN environment. This means that if a FCoE or FC component is causing a problem, Veritas will work with the component vendor in an attempt to resolve the problem, but resolution is not guaranteed. Veritas and most hardware vendors listed are members of TSANet.
Infrastructure - Considerations
Subject | Notes |
Vendor support considerations | 1. To ensure compatibility, the device manufacturers and the operating system vendor must support the combination of SAN components. |
CNAs
- This list of SAN components represents equipment that has been used during NetBackup qualification testing of devices listed in previous sections of this document. It is not intended to be a list of supported components.
CNAs - Considerations
Subject | Notes |
Support assumptions | For details on supported operating systems, please refer to the
"NetBackup 8.0 - 8.x.x Operating System Software Compatibility List"
.
1. Where support is shown for "Windows Server 2008 Enterprise Edition" it also means that the other editions of Windows Server 2008 and Windows Server 2008 R2 are supported. Only the x64 (64-bit) editions of the OS are supported as a NetBackup Media Server. Server Core Installation Option is not supported as a NetBackup Media Server. 2. Where support is shown for "Windows Server 2012 Datacenter" it also means that the other editions of Windows Server 2012, Windows Storage Server 2012, Windows Server 2012 R2, and Windows Storage Server 2012 R2 are supported. 3. Where support is shown for "Windows Server 2016 Datacenter" it also means that the other editions of Windows Server 2016 and Windows Storage Server 2016 are supported. 4. Where support is shown for "Windows Server 2019 Datacenter" it also means that the other editions of Windows Server 2019 are supported. 5. Where support is shown for "Red Hat Enterprise Linux 6 on x86-64" it also means that CentOS 6 and Oracle Linux 6 are supported. 6. Where support is shown for "Red Hat Enterprise Linux 7 on x86-64" it also means that CentOS 7 and Oracle Linux 7 are supported. |
Vendor support considerations | 1. Consult the hardware vendor's web site for current firmware and driver updates (where applicable). |
Configuration considerations | 1. All like CNAs within a SAN should use the same firmware, BIOS and driver revision as recommended by CNA vendors. |
Operating system support dropped |
1. CentOS 6 is not supported as a media server with NetBackup 9.0 and later.
2. Red Hat Enterprise Linux 6 is not supported as a media server with NetBackup 9.0 and later. 3. Solaris (all versions) on SPARC and x86-64 will not be supported as a media server with NetBackup 10.0 and later. 4. SUSE Linux Enterprise Server 11 is not supported as a media server with NetBackup 8.3 and later. 5. SUSE Linux Enterprise Server 12 GA through SP2 are not supported as a media server with NetBackup 8.3 and later. 6. Windows 2008 and 2008 R2 are not supported by Microsoft as of January 14, 2020. |
HBAs
- This list of SAN components represents equipment that has been used during NetBackup qualification testing of devices listed in previous sections of this document. It is not intended to be a list of supported components.
HBAs - Considerations
Subject | Notes |
Support assumptions | For details on supported operating systems, please refer to the
"NetBackup 8.0 - 8.x.x Operating System Software Compatibility List"
.
1. Where support is shown for "Windows Server 2008 Enterprise Edition" it also means that the other editions of Windows Server 2008 and Windows Server 2008 R2 are supported. Only the x64 (64-bit) editions of the OS are supported as a NetBackup Media Server. Server Core Installation Option is not supported as a NetBackup Media Server. 2. Where support is shown for "Windows Server 2012 Datacenter" it also means that the other editions of Windows Server 2012, Windows Storage Server 2012, Windows Server 2012 R2, and Windows Storage Server 2012 R2 are supported. 3. Where support is shown for "Windows Server 2016 Datacenter" it also means that the other editions of Windows Server 2016 and Windows Storage Server 2016 are supported. 4. Where support is shown for "Windows Server 2019 Datacenter" it also means that the other editions of Windows Server 2019 are supported. 5. Where support is shown for "Red Hat Enterprise Linux 6 on x86-64" it also means that CentOS 6 and Oracle Linux 6 are supported. 6. Where support is shown for "Red Hat Enterprise Linux 7 on x86-64" it also means that CentOS 7 and Oracle Linux 7 are supported. |
Vendor support considerations | 1. All like HBAs within a SAN should use the same firmware, BIOS and driver revision as recommended by HBA vendors.
2. Consult the hardware vendor's web site for current firmware and driver updates (where applicable). |
Operating system support dropped |
1. CentOS 6 is not supported as a media server with NetBackup 9.0 and later.
2. Red Hat Enterprise Linux 6 is not supported as a media server with NetBackup 9.0 and later. 3. Solaris (all versions) on SPARC and x86-64 will not be supported as a media server with NetBackup 10.0 and later. 4. SUSE Linux Enterprise Server 11 is not supported as a media server with NetBackup 8.3 and later. 5. SUSE Linux Enterprise Server 12 GA through SP2 are not supported as a media server with NetBackup 8.3 and later. 6. Windows 2008 and 2008 R2 are not supported by Microsoft as of January 14, 2020. |
Infrastructure - HBAs Used In Testing
Contents (for details click on the checkbox) | ||
---|---|---|
Broadcom Emulex |
Bridges/Routers
- This list of SAN components represents equipment that has been used during NetBackup qualification testing of devices listed in previous sections of this document. It is not intended to be a list of supported components.
Infrastructure - Considerations
Subject | Notes |
Vendor support considerations | 1. To ensure compatibility, the device manufacturers and the operating system vendor must support the combination of SAN components.
2. Consult the hardware vendor's web site for current firmware. |
Infrastructure - Routers/Bridges Used In Testing
Contents (for details click on the checkbox) | ||
---|---|---|
Bridges/Routers |
Switches
- This list of SAN components represents equipment that has been used during NetBackup qualification testing of devices listed in previous sections of this document. It is not intended to be a list of supported components.
Infrastructure - Considerations
Subject | Notes |
Vendor support considerations | 1. To ensure compatibility, the device manufacturers and the operating system vendor must support the combination of SAN components.
2. Consult the hardware vendor's web site for current firmware. |
Infrastructure - Switches Used In Testing
Contents (for details click on the checkbox) | ||
---|---|---|
Switches |
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
Devices Retiring Soon for Server | Back to top |
- The devices in this section will not be listed in the Hardware Compatibility List for the next major NetBackup release after NetBackup 8.2. Many of these devices are end-of-life products that are no longer supported by the manufacturer.
Virtual Tape Libraries
Manufacturer | Device |
SEPATON | S2100 |
Tape Libraries
Manufacturer | Device |
Dell EMC | PowerVault ML6000 Series, PowerVault TL2000, PowerVault TL4000 |
Hewlett Packard Enterprise | 1/8 G2 Tape Autoloader, MSL2024, MSL4048, MSL8048, MSL8096 |
IBM | System Storage TS3200 (Machine Type 3573), System Storage TS3310 (Machine Type 3576) |
Oracle | StorageTek SL24, StorageTek SL48, StorageTek SL500 |
Quantum | Scalar i2000, Scalar i500, SuperLoader 3 |
Spectra Logic | Spectra T120 |
Tandberg | StorageLibrary T24, StorageLibrary T48 |
Tape Drives
Manufacturer | Device |
Hewlett Packard Enterprise | Ultrium 1760 LTO4, Ultrium 1840 LTO4, Ultrium 920 LTO3, Ultrium 960 LTO3 |
IBM | System Storage TS1030 (3588 Model F3B) Ultrium 3, System Storage TS2230 Ultrium 3 Half Height, System Storage TS2340 Ultrium 4, TotalStorage 3580 Ultrium 3, Ultrium 3, Ultrium 3 Half Height, Ultrium 4 (U160) |
Quantum | LTO-3, LTO-3 HH |
Tandberg | HH LTO 3 |
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
Software Compatibility List (SCL) for Client | Back to top |
-
NetBackup is supported on all editions (Advanced, Base, DC, etc.) and on all vendor GA updates (n.1, n.2, etc.) or service packs (SP1, SP2, etc.) unless stated otherwise in the tables below.
IBM POWER 8/9 platform is supported only with Little Endian hardware architecture.
SUSE SUSE Linux Enterprise Server - NetBackup Client
OS | CPU Architecture | OS Bits | NetBackup Client | NetBackup Bits | NBAC | SAN Client | Minimum NetBackup Level |
SUSE Linux Enterprise Server 15 | x86-64 | 64 | Y | 64 | Y | Y | 8.2 |
System Requirements for Client | Back to top |
NetBackup Binary Size
-
Approximate binary size of the NetBackup client software for an initial install.
OS - All Versions | CPU Architecture | 32-bit client | 64-bit client | Notes |
SUSE Linux Enterprise Server | x86-64 | 1224 MB |
Temporary Disk Space Requirement for Install or Upgrade
-
After downloading the software, temporary disk space is required for the installation process on almost all platforms. For local installs or remote (push) installs using the rsh or ssh method, you may designate where this temporary space is located via use of environment variables, NB_TMPDIR or TMPDIR on the client. NB_TMPDIR is used if set, TMPDIR next if set, otherwise /tmp. For ftp or sftp remote installs, the client software is moved to /tmp on the client and during the install environment variables NB_TMPDIR or TMPDIR are used as mentioned previously. For details, consult the Installation Guide.
For local installs, you will need approximately 571 MBs of temporary disk space during the install.
For remote installs, you will need approximately 1445 MBs for placement of the client software and, then, for the install.
If using Live Update, you will need 4.5 GBs of temporary disk space. The location of the temporary disk space is designated in the 'workdir' setting in the /usr/openv/netbackup/nblu.conf file with /tmp being the default.
Valid Characters in Host Names Requirement
-
NetBackup requires host names to comply with RFC-1123, meaning only ASCII characters "a" thru "z", case insensitive, and digits "0" thru "9" and the hyphen character.
- NetBackup Documentation References:
- NetBackup Release Notes
- NetBackup Self Service Release Notes
Bare Metal Restore File System/Volume Manager Support for Client | Back to top |
This feature is not supported on this platform.
- NetBackup Software Compatibility Documentation:
- NetBackup 8.0 - 8.x.x Operating System Software Compatibility List (last updated on March 11, 2024)
- 8.0 - 8.x.x OS Software Compatibility List Updates
Client Selections for Backup Policies for Client | Back to top |
There is no information found for this section.
- NetBackup Software Compatibility Documentation:
- NetBackup 8.0 - 8.x.x Operating System Software Compatibility List (last updated on March 11, 2024)
- 8.0 - 8.x.x OS Software Compatibility List Updates
Deduplication Supported Operating Systems for Client | Back to top |
-
If you are looking for information regarding PureDisk support, and not media server deduplication, reference article http://www.veritas.com/docs/000008731
For further details on recommended hardware reference NetBackup Deduplication: Additional Usage Information: http://www.veritas.com/docs/000041111
-
Where support is shown for "Windows Server 2008" or "Windows Server 2008 R2" it is implied that Standard Edition, Enterprise Edition, Datacenter Edition, and Web Edition are supported.
Where support is shown for "Windows Server 2012", or "Windows Server 2012 R2" it is implied that Foundation Edition, Essentials Edition, Standard Edition, and Datacenter Edition are supported.
- Media Server Deduplication (MSDP) is supported in an Infrastructure as a Service (IaaS) environment on any cloud platform that meets minimum requirements. For additional details on minimum and recommended configurations see NetBackup Media Server Deduplication (MSDP) in the Cloud https://www.veritas.com/support/en_US/article.000004584.
OS | CPU Architecture | Client Deduplication | Minimum NetBackup Level |
SUSE Enterprise Linux Server 15 | x86-64 | Yes | 8.2 |
- NetBackup Software Compatibility Documentation:
- NetBackup 8.0 - 8.x.x Operating System Software Compatibility List (last updated on March 11, 2024)
- 8.0 - 8.x.x OS Software Compatibility List Updates
Database and Application Agent Compatibility for Client | Back to top |
- This Software Compatibility List (SCL) document describes the supported database and application agents for Veritas NetBackup 8.0 through 8.x
- For all other NetBackup compatibility lists, refer to http://www.veritas.com/docs/000033647
- IPV6 and Dual Stack environments are supported from NetBackup 8.1.1 onwards with few limitations, refer technote for additional information http://www.veritas.com/docs/100041420
- Database and application patch support: Major versions of database software have been qualified in Veritas Labs and are listed in the tables below. NetBackup supports minor versions, service packs, and patches of database software unless otherwise noted, with the exception of Microsoft Exchange, Microsoft SharePoint and Microsoft SQL Server.
- Linux support: For Linux distributions shown in the tables below, NetBackup is supported on all "editions" and on all vendor GA updates (n.1, n.2, etc.) or service packs (SP1, SP2, etc.) unless otherwise noted in this document or in the NetBackup OS Compatibility List, http://www.veritas.com/docs/100032808
- Database Appliances: 3rd party database hardware appliances are supported if the appliance OS/architecture and database software are listed in the Veritas NetBackup OS compatibility list http://www.veritas.com/docs/100032808 and in the Database and Application Agent compatibility list (this document). For example, some Oracle Exadata and Exalogic models are supported based upon this support statement. Please consult the vendor documentation to identify the embedded software versions.
- End of life information: More information is available about certain NetBackup features, functionality, 3rd-party product integration, Veritas product integration, applications, databases, and OS platforms that Veritas intends to replace with newer and improved functionality, or in some cases, discontinue without replacement. Please see the SORT widget titled "NetBackup Future Platform and Feature Plans" at https://sort.veritas.com/netbackup.
Database Agents
- The sections below contain information that is related to specific database agents and OS platforms.
-
SAP
The NetBackup SAP Agent protects SAP Oracle environments by integrating with SAP BR*Tools. SAP BR*Tools may have a separate version from the SAP Kernel. Reference Technical Solution 51094 for details http://www.veritas.com/docs/000033132.
SAP environments based on Microsoft SQL or DB2 databases are supported via the NetBackup Microsoft SQL and DB2 agents respectively.
SAP supports Oracle and MAX-DB base environments.
-
Windows Server 2008
When using a 32-bit OS on a x64 CPU the DB Agent is supported if the x86 CPU is listed in this compatibility list.
Contents (for details click on the checkbox) | ||
---|---|---|
HCL Domino | IBM DB2 | IBM Informix |
MariaDB | MySQL | Oracle Database |
PostgreSQL | SAP ASE | SAP HANA |
SAP MaxDB | SQLite |
- NetBackup Database and Application Agent Documentation:
- NetBackup 8.0 - 8.x.x Database and Application Agent Compatibility List (last updated on September 14, 2023)
- 8.0 - 8.x.x Database and Application Agent Software Compatibility List Updates
Snapshot Client - General Information for Client | Back to top |
- This section contains Snapshot Client compatibility information for Veritas NetBackup 8.2 - 8.x.x. It covers NetBackup Server (which includes Enterprise Server and Server), Client, and Snapshot Client.
- Veritas supports standard unaltered kernel/Operating System levels. Should an issue arise on a revised kernel, Operating System, or virtual system environment, Veritas support may request the recreation of the problem with the standard operating environment distribution.
- Veritas InfoScale / Storage Foundation Compatibility
- Veritas InfoScale/Storage Foundation file system and volume manager are supported as the Snapshot Client stack based on Operating System requirements of the InfoScale/Storage Foundation product. For specific OS compatibility information regarding InfoScale/Storage Foundation, please see "Veritas Services and Operations Readiness Tools (SORT)".
- FlashBackup policy limitation: The NetBackup FlashBackup policy is not supported on Veritas File System (VxFS) layout versions 8 and beyond, versions 7 and earlier are supported.
- Third-Party Products
- When a problem may be related to product(s) from a third-party vendor with whom Veritas has a cooperative or collaborative relationship on such product(s), then Veritas will work with that vendor in an attempt to resolve the problem, but resolution is not guaranteed. When Veritas does not have such a support relationship in place with the third-party vendor, or when the vendor ceases to support such product(s), then our ability to support Veritas Licensed Software operating with such vendor's product(s) may be limited, affected, or prevented (and such third party product(s) may cease to be part of Veritas-supported configuration(s)). Veritas support may be limited by the hardware or software vendor due to their support lifecycle. Should a vendor announce End of Support for a product, Veritas support may be limited.
- Oracle Agent Support
- Oracle ASM Environment is not supported.
Snapshot Client - Considerations
Subject | Notes |
Support assumptions | For details on supported operating systems, please refer to the
"NetBackup 8.0 - 8.x.x Operating System Software Compatibility List"
.
1. Where support is shown for "Windows Server 2008 Enterprise Edition" it also means that the other editions of Windows Server 2008 and Windows Server 2008 R2 are supported. Only the x64 (64-bit) editions of the OS are supported as a NetBackup Media Server. Server Core Installation Option is not supported as a NetBackup Media Server. 2. Where support is shown for "Windows Server 2012 Datacenter" it also means that the other editions of Windows Server 2012, Windows Storage Server 2012, Windows Server 2012 R2, and Windows Storage Server 2012 R2 are supported. 3. Where support is shown for "Windows Server 2016 Datacenter" it also means that the other editions of Windows Server 2016 and Windows Storage Server 2016 are supported. 4. Where support is shown for "Windows Server 2019 Datacenter" it also means that the other editions of Windows Server 2019 are supported. |
Operating system support dropped |
1. CentOS 6 is not supported as a media server with NetBackup 9.0 and later.
2. Red Hat Enterprise Linux 6 is not supported as a media server with NetBackup 9.0 and later. 3. Solaris (all versions) on SPARC and x86-64 will not be supported as a media server with NetBackup 10.0 and later. 4. SUSE Linux Enterprise Server 11 is not supported as a media server with NetBackup 8.3 and later. 5. SUSE Linux Enterprise Server 12 GA through SP2 are not supported as a media server with NetBackup 8.3 and later. 6. Windows 2008 and 2008 R2 are not supported by Microsoft as of January 14, 2020. |
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
Snapshot Client - Array-based Snapshot Methods for Client | Back to top |
This feature is not supported on this platform.
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
Snapshot Client - Software-based Snapshot Methods for Client | Back to top |
This feature is not supported on this platform.
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
Encryption and Security Solutions for Client | Back to top |
- NetBackup Client Encryption is compatible with all disk storage units (DSU), tape drives, tape libraries, and virtual tape libraries supported by NetBackup.
- Note: Any DSU type supported by NetBackup can be used with client encryption, although encryption prevents deduplication by Media Server Dedupe, OpenStorage devices, or VTLs.
- NetBackup Client Encryption is supported on all NetBackup client platforms except OpenVMS, and is not supported with BMR or SAN client.
Symantec Security Information Manager
- NetBackup Client is supported with Symantec Security Information Manager (SSIM) v4.8 and later.
- For more information on SSIM, see https://support.symantec.com/en_US/dpl.52517.html
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
File System Compatibility for Client | Back to top |
There is no information found for this section.
- NetBackup Software Compatibility Documentation:
- NetBackup 8.0 - 8.x.x Operating System Software Compatibility List (last updated on March 11, 2024)
- 8.0 - 8.x.x OS Software Compatibility List Updates
NetBackup OpsCenter Web Browser Requirements | Back to top |
Web Browser | Versions | Notes |
Microsoft Internet Explorer | - 7.x, 8.x, 9.0, 10.0, 11.0
- 32-bit and 64-bit | - IE 7.0 and later versions may display a security certificate warning page when you access OpsCenter. Reference "Disabling security certificate warnings permanently from browsers" instructions in the NetBackup OpsCenter Administrator's Guide.
- It may not be possible to view reports, jobs, or audit data when exporting from IE 9.0. Alternatively, IE 9.0 may show a "Internet Explorer Cannot Download" error when exporting reports, jobs, or auditing data from OpsCenter. - Reference "Exporting OpsCenter reports or data with IE 9.0" instructions in the NetBackup OpsCenter Administrator's Guide. - Extra steps are required to access the OpsCenter console using Internet Explorer version 7 or 8 on a 32-bit Windows computer. For more information, see "About web browser considerations" in the NetBackup OpsCenter Administrator's Guide. - NetBackup 7.7.2 and later support OpsCenter with IE 11 - The NetBackup OpsCenter Administrator's Guide and other Guides are available by selecting the appropriate NetBackup version link at http://www.veritas.com/docs/000003214 |
Mozilla Firefox | - 3.0, 3.5.x, 3.6.x, 9.0.1 and above for OpsCenter 7.0 to 7.5.
- 15.0 and later versions for OpsCenter 7.6 and later. - 32-bit and 64-bit - 27.0 and later versions for OpsCenter 8.0 and later | - Mozilla Firefox may display an Untrusted Connection page when you access OpsCenter. Reference "Disabling the Untrusted Connection page in Mozilla Firefox" instructions in the Veritas OpsCenter Administrator's Guide. |
- NetBackup Software Compatibility Documentation:
- NetBackup 8.0 - 8.x.x Operating System Software Compatibility List (last updated on March 11, 2024)
- 8.0 - 8.x.x OS Software Compatibility List Updates
NetBackup OpsCenter Backup Product Support | Back to top |
-
There are two OpsCenter products: Veritas NetBackup OpsCenter and Veritas NetBackup OpsCenter Analytics.
OpsCenter does not require any license and is included with the NetBackup Enterprise Server and Server products. OpsCenter provides single deployment configuration and user interface for monitoring, alerting, and reporting functionality. It provides monitoring, management and administration capabilities for NetBackup as well as operational reporting for other products as designated in the following table.
OpsCenter Analytics is the licensed version of OpsCenter. In addition to the features available in the unlicensed OpsCenter version, Analytics offers report customization, chargeback reporting and support for third-party data protection products as designated in the following table. The primary objectives of this product are to help organizations assess their compliance with business standards, e.g., service level agreements, and assist in effective business planning, e.g., future backup requirements via backup trend analysis.
Listed in the table below are the backup and archiving products and versions supported by OpsCenter and OpsCenter Analytics.
Backup Product | Version | Support Level | Analytics License Required |
Veritas NetBackup | 7.7 and higher versions | All supported NetBackup platforms by Remote Agent.
Native OpsCenter agent for Windows 2008 (SP2 and R2) and Solaris 10 and 11. BCS customer are entitled to receive support for the legacy products until 2019. Refer to https://www.veritas.com/support/en_US/business-critical-services/support-extensions-program.html | No |
Veritas NetBackup Appliance | See NetBackup Hardware Compatibility List for Appliance support information.
http://www.veritas.com/docs/000025228 | Data collection happens automatically by NBSL | No |
Veritas NetBackup PureDisk | 6.2, 6.2.2, 6.5, 6.5.1, 6.5.1.2, 6.6, 6.6.0.1, 6.6.0.2, 6.6.0.3, 6.6.1, 6.6.1.2, 6.6.3a, 6.6.5 | PureDisk supported platform (PDOS) by the OpsCenter integrated Agent. You do not need a separate Agent to collect data from PureDisk. You can use the inbuilt Agent of the OpsCenter Server for data collection.
To create or configure the data collector, select the Agent that is installed as Integrated Agent. | No |
- NetBackup Software Compatibility Documentation:
- NetBackup 8.0 - 8.x.x Operating System Software Compatibility List (last updated on March 11, 2024)
- 8.0 - 8.x.x OS Software Compatibility List Updates
NetBackup OpsCenter Operating System Requirements | Back to top |
-
OpsCenter Analytics has the same Operating System requirements as OpsCenter.
Check the Operating Systems server table for the exact version of NetBackup in which OpsCenter server support started.
Veritas Cluster Server (VCS) support for OpsCenter 7.1 Server, OpsCenter 7.5 Server, OpsCenter 7.6 Server and OpsCenter 7.7.1 in cluster mode:
VCS versions 4.3, 5.0 MP3 and 5.1 on Solaris
VCS versions 4.2 RP2, 5.1 and 5.1 SP1 on Windows
Veritas Cluster Server (VCS) support for OpsCenter 7.7.2, OpsCenter server 7.7.3, OpsCenter server 8.0, OpsCenter server 8.1 in cluster mode:
VCS version 6.1 on Windows 2008 R2 SP1 and Windows 2012 R2.
OpsCenter Agent and OpsCenter View Builder installations are not supported in a cluster environment.
32-bit View Builder binaries are used on 64-bit platforms.
OS | CPU Architecture | OpsCenter Server | OpsCenter Agent | OpsCenter View Builder |
SUSE Linux Enterprise Server 15 | x86-64 | Yes | No | No |
NetBackup OpsCenter Binary Size
-
Approximate binary sizes for NetBackup OpsCenter Agent, Server, and ViewBuilder software.
OS - All Versions | CPU Architecture | Agent | Server | ViewBuilder |
SUSE Linux Enterprise Server | x86-64 | 752MB |
NetBackup OpsCenter Physical Memory Requirement
OS/Version | CPU Architecture | Minimum Memory Requirement |
SUSE Linux Enterprise Server 15 | x86-64 | 8 GB |
Valid Characters in Host Names Requirement
-
NetBackup OpsCenter requires host names to comply with RFC-1123, meaning only ASCII characters "a" thru "z", case insensitive, and digits "0" thru "9" and the hyphen character.
- Software compatibility and release notes documentation is contained in:
- NetBackup 8.0 - 8.x.x Operating System Software Compatibility List (last updated on March 11, 2024)
- 8.0 - 8.x.x OS Software Compatibility List Updates
- NetBackup Release Notes
- NetBackup Self Service Release Notes
NetBackup Administration Consoles | Back to top |
-
The NetBackup Java Administration Console is an interface to configure and manage NetBackup installed on the same machine. The interface can run on any NetBackup Java-capable system.
The Backup Archive and Restore (BAR) console is an interface to the NetBackup client. The Backup, Archive, and Restore utility performs backups and archives for the system on which it is installed and restores for this system and other clients.
For information on how to install the consoles mentioned above reference the NetBackup Installation Guides. And for information on usage reference the NetBackup Administrator's Guides.
The table below is a list of the platforms that support the NetBackup-Java Administration Console and the Backup Archive and Restore Interface.
Note: If a supported NetBackup client is not listed in the table below the client is supported for backup and restore, but it does not support any of the available graphical interfaces.
- Where support is shown for "Windows Server 2008" or "Windows Server 2008 R2", it is implied that Standard Edition, Enterprise Edition, Datacenter Edition, and Web Edition are supported.
- Where support is shown for "Windows Server 2012" or "Windows Server 2016" it is implied that Standard Edition, Datacenter Edition, Essentials Edition, and Foundation Edition are supported.
- Where support is shown for "Windows Server 2019" it is implied that Standard Edition, Datacenter Edition, Essentials Edition are supported.
-
Administrative consoles for supported versions of NetBackup are included in the NetBackup installation packages.
Starting at version 8.1, console versions are installed for all versions of NetBackup that are not beyond their End of Support Life (EOSL).
For information on supported versions of NetBackup see https://sort.veritas.com/eosl.
OS | CPU Architecture | NetBackup-Java Administration Console | Backup, Archive, and Restore Interface |
SUSE Linux Enterprise Server 11, 12, 15 | x64 | Y | Y |
- NetBackup Software Compatibility Documentation:
- NetBackup 8.0 - 8.x.x Operating System Software Compatibility List (last updated on March 11, 2024)
- 8.0 - 8.x.x OS Software Compatibility List Updates
NetBackup in the Cloud | Back to top |
Core NetBackup Deployments in the Cloud
- NetBackup supports cloud-based Primary Servers and Media Servers as part of extending data protection into workloads in the cloud. For more information, see the "360 Data Management" page.
Core NetBackup Deployments in the Cloud - Considerations
Subject | Notes |
Support assumptions | 1. NetBackup is supported on any cloud infrastructure environment that meets NetBackup's minimum resource requirements.
For details on operating systems supported by NetBackup, please refer to the
"NetBackup 8.0 - 8.x.x Operating System Software Compatibility List"
.
For details on NetBackup minimum resource requirements, please refer to
"Installation and upgrade requirements for UNIX and Linux"
or
"Installation and upgrade requirements for Windows and Windows clusters"
in the NetBackup Installation Guide.
2. Veritas does not certify the cloud compute layer or the cloud block storage layer. They are assumed to work as similar physical resources do. 3. NetBackup-certified cloud object storage support is listed in the vendor tables in the Cloud Storage Solutions section of this HCL. 4. NetBackup deployment templates are available for some operating systems and cloud infrastructure solutions. Supported templates are listed in the vendor tables below. For a quicker and easier NetBackup deployment, Veritas strongly recommends using these templates for deploying NetBackup instead of doing a manual NetBackup installation. For examples, see Setting up NetBackup CloudCatalyst in AWS and NetBackup in the Cloud - Guidelines for AWS Deployments . |
Core NetBackup Deployments in the Cloud - Links to Solution Information
- NetBackup is supported on any cloud infrastructure environment that meets NetBackup's minimum resource requirements. Solution briefs have been created for the cloud infrastructures listed in the table below.
Core NetBackup Deployments in the Cloud - Deployment Templates
Contents (for details click on the checkbox) | ||
---|---|---|
Amazon | Microsoft |
NetBackup CloudPoint In-Cloud Data Protection
- NetBackup CloudPoint In-Cloud Data Protection is available in NetBackup 8.3 and later.
NetBackup CloudPoint In-Cloud Data Protection - System Requirements
NetBackup CloudPoint In-Cloud Data Protection - Supported File Systems
- NetBackup CloudPoint In-Cloud Data Protection is supported with the following operating systems and file systems:
NetBackup CloudPoint In-Cloud Data Protection - File system support
Operating System | Supported File Systems |
Linux | ext3, ext4, xfs[1] |
Windows | NTFS |
Footnotes
- 1. ext2 snapshots are not application-consistent due to underlying OS limitations.
NetBackup CloudPoint In-Cloud Data Protection - High Level Feature Support
- NetBackup CloudPoint In-Cloud Data Protection high level feature support information is listed in the tables below, organized by vendor.
Contents (for details click on the checkbox) | ||
---|---|---|
NetBackup CloudPoint In-Cloud Data Protection High Level Feature Support - Amazon Web Services | NetBackup CloudPoint In-Cloud Data Protection High Level Feature Support - Google Cloud Platform | NetBackup CloudPoint In-Cloud Data Protection High Level Feature Support - Microsoft Azure |
NetBackup CloudPoint In-Cloud Data Protection - Restore Options from Snapshots
- NetBackup CloudPoint In-Cloud Data Protection support for snapshot restore options is listed in the tables below, organized by vendor.
Contents (for details click on the checkbox) | ||
---|---|---|
NetBackup CloudPoint In-Cloud Data Protection Restore Options - Amazon Web Services | NetBackup CloudPoint In-Cloud Data Protection Restore Options - Google Cloud Platform | NetBackup CloudPoint In-Cloud Data Protection Restore Options - Microsoft Azure |
NetBackup CloudPoint In-Cloud Data Protection Replication Support Across Regions
- NetBackup CloudPoint In-Cloud Data Protection support for replication across regions is listed in the tables below, organized by cloud vendor.
Contents (for details click on the checkbox) | ||
---|---|---|
NetBackup CloudPoint In-Cloud Data Protection Replication Support - Amazon Web Services |
NetBackup CloudPoint In-Cloud Data Protection Replication Support Across Accounts
- NetBackup CloudPoint In-Cloud Data Protection support for replication across accounts is listed in the tables below, organized by vendor.
Contents (for details click on the checkbox) | ||
---|---|---|
NetBackup CloudPoint In-Cloud Data Protection Replication Support - Amazon Web Services |
NetBackup CloudPoint In-Cloud Data Protection Restore Options for Snapshots Replicated Across Regions
- NetBackup CloudPoint In-Cloud Data Protection support for restore options for snapshots replicated across regions is listed in the tables below, organized by vendor.
Contents (for details click on the checkbox) | ||
---|---|---|
NetBackup CloudPoint In-Cloud Data Protection Replicated Snapshot Restore Support - Amazon Web Services |
NetBackup CloudPoint In-Cloud Data Protection Restore Options for Snapshots Replicated Across Accounts
- NetBackup CloudPoint In-Cloud Data Protection support for restore options for snapshots replicated across accounts is listed in the tables below, organized by vendor.
Contents (for details click on the checkbox) | ||
---|---|---|
NetBackup CloudPoint In-Cloud Data Protection Replicated Snapshot Restore Support - Amazon Web Services |
NetBackup CloudPoint In-Cloud Data Protection Supported Regions
- Region support for cloud providers is listed in the tables below, organized by provider.
NetBackup CloudPoint In-Cloud Data Protection - Supported Regions
Cloud Provider | Supported Regions |
Amazon Web Services | Africa (Cape Town), Asia Pacific (Hong Kong), Asia Pacific (Mumbai), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), Asia Pacific (Tokyo), AWS GovCloud (US-East), AWS GovCloud (US-West), Canada (Central), China (Beijing), China (Ningxia), Europe (Frankfurt), Europe (Ireland), Europe (London), Europe (Milan), Europe (Paris), Middle East (Bahrain), South America (Sao Paulo), US East (N. Virginia), US East (Ohio), US West (N. California), US West (Oregon) |
Google Cloud Platform | Asia-East1 (zones a, b, c), Asia-East2 (zones a, b, c), Asia-Northeast1 (zones a, b, c), Asia-Northeast2 (zones a, b, c), Asia-South1 (zones a, b, c), Asia-Southeast1 (zones a, b, c), Australia-Southeast1 (zones a, b, c), Europe-North1 (zones a, b, c), Europe-West1 (zones b, c, d), Europe-West2 (zones a, b, c), Europe-West3 (zones a, b, c), Europe-West4 (zones a, b, c), Europe-West6 (zones a, b, c), NorthAmerica-Northeast1 (zones a, b, c), SouthAmerica-East1 (zones a, b, c), US-Central1 (zones a, b, c, f), US-East1 (zones b, c, d), US-East4 (zones a, b, c), US-West1 (zones a, b, c), US-West2 (zones a, b, c), US-West3 (zones a, b, c), US-West4 (zones a,b,c) |
Microsoft Azure | All regions |
NetBackup CloudPoint In-Cloud Data Protection - Database Applications
- NetBackup CloudPoint In-Cloud Data Protection support for database applications is listed in the tables below, organized by vendor.
Contents (for details click on the checkbox) | ||
---|---|---|
MongoDB | Microsoft SQL | Oracle |
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
NetBackup Snapshot Manager | Back to top |
- Starting with NetBackup 8.3, you can add CloudPoint servers from the NetBackup web UI. You can manage CloudPoint and control discovery of assets from the NetBackup webUI, REST API, and CLI without interacting with the CloudPoint interfaces.
- You can upgrade to NetBackup Snapshot Manager from CloudPoint 2.x and later. If you are using a standalone CloudPoint server and want to use it along with NetBackup, you can migrate your CloudPoint server. For more information, see the Veritas NetBackup CloudPoint Install and Upgrade Guide.
NetBackup Snapshot Manager / CloudPoint - Considerations
Subject | Notes |
Vendor support considerations | 1. All storage configurations shown in the tables below were tested with drivers and firmware supported by the storage array vendors.
Check with these vendors for minimum driver and firmware levels, specific driver and firmware support, support for the stated Veritas products, and other functional options.
2. Veritas supports hardware products listed below that include virtualization capability, but Veritas does not support compatibility issues that can be attributed to the virtualization feature. Veritas requires any compatibility issue to be reproduced in a non-virtualization environment. If the issue is confirmed to be related to Veritas products, Veritas will support its software at the same level as when that software is not running with hardware virtualization products. Veritas will cooperate with virtualization vendors, and attempt to assist in the diagnosis of problems found between the virtualization and Veritas products. 3. Minor ("double-dot") versions of the software listed in the tables below are also supported. (Example: "v5.0" means versions v5.0.1, v5.0.2, etc. are also supported.) |
NetBackup Snapshot Manager / CloudPoint - Vendor Compatibility
Contents (for details click on the checkbox) | ||
---|---|---|
Dell EMC | Hewlett Packard Enterprise | Hitachi Vantara |
Huawei | Infinidat | NetApp |
Nutanix | Pure Storage |
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
Support for Workloads with Image Sharing in Cloud | Back to top |
- Image Sharing in Cloud is supported with either MSDP Direct Cloud Tiering or CloudCatalyst. Workload support is listed in the tables below.
Support for Image Sharing using MSDP Direct Cloud Tiering
- Image sharing using MSDP Direct Cloud Tiering is supported with any of the S3 cloud providers listed in the Vendor Compatibility tables below, and with Microsoft Azure Blob storage.
- MSDP Direct Cloud Tiering is supported with NetBackup 8.3 and later.
- For more information on image sharing using MSDP Direct Cloud Tiering, see "About Image Sharing using MSDP cloud".
Support for Image Sharing using CloudCatalyst
- Image sharing using CloudCatalyst is supported with any of the S3 cloud providers listed in the Vendor Compatibility tables below, and with Microsoft Azure Blob storage.
- For more information on image sharing using CloudCatalyst, see "About automated disaster recovery in cloud using CloudCatalyst".
Image Sharing in Cloud - Supported Workloads
Workload | NetBackup Start of Support | Notes |
Basic backups of files and folders | 8.2 | |
Bare Metal Restore (BMR) | Not supported | Duplication of images is supported. Restores can be done from another NetBackup media server. |
DB2 | 8.2 | |
Enterprise Vault | 8.2 | |
Hadoop | 8.2 | |
Hbase | 8.2 | |
Hyper-V | 8.2 | |
Informix | 8.2 | |
Lotus Notes | 8.2 | |
MariaDB | 8.2 | |
Microsoft Exchange Server | 8.2 | |
Microsoft SharePoint | 8.2 | |
Microsoft SQL Server | 8.2 | |
MySQL | 8.2 | |
NDMP | 8.2 | |
Nutanix | Not supported | Duplication of images is supported. Restores can be done from another NetBackup media server. |
OpenStack | Not supported | Duplication of images is supported. Restores can be done from another NetBackup media server. |
Oracle | 8.2 | |
Postgres | 8.2 | |
RHV | 8.2 | |
SAP | Not supported | Duplication of images is supported. Restores can be done from another NetBackup media server. |
Sybase | 8.2 | |
VMware | 8.2 |
- NetBackup Hardware Compatibility Documentation:
- NetBackup 8.2 - 8.x.x Hardware and Cloud Storage Compatibility List (last updated on October 05, 2023)
- NetBackup Hardware Compatibility Documentation: Introduction
NetBackup Future Platform and Feature Plans | Back to top |
-
Veritas is committed to providing the best possible data protection experience for NetBackup customers on the widest variety of platforms, operating systems, databases, applications, and hardware. Veritas is continuously reviewing NetBackup's support of these items to ensure the proper balance of supporting their General Availability release, the very latest versions of new software, hardware and introducing new features and functionality and maintaining support for existing and older versions of these products and NetBackup functionality. While Veritas is continually adding support for new features, platforms, operating systems, and applications, it may be also necessary to improve, replace, or remove support in NetBackup for lesser used, older features, functionality, software, OS, databases, applications, integration with other products, and hardware that are no longer supported or nearing their end of support life from the manufacturer from NetBackup Compatibility Lists.
To better help its customers to plan for these upcoming changes to the support status of these items in NetBackup, Veritas will provide advanced notification as soon as possible as listed below. Veritas intends to list the older product functionality, features, hardware, OS, and 3rd party software products that will no longer be supported in the next release of NetBackup. If possible, these items are listed at least six months before that release.
The information below lists certain features, functionality, 3rd-party and Veritas products, applications, databases, and OS/Platforms for which Veritas intends to replace with newer and improved functionality, or in some cases, discontinue without replacement. The last release of NetBackup to proliferate support of the item is provided. Technotes in the Notes column contain additional details about available replacement options. Where a major, minor or release update version is specified, the feature or platform is supported through the last Maintenance Update (patch) of that release. Where 'All' is specified, it is supported for all versions or variations of the family of the relevant or supported platforms.
Check this site frequently for updated information for NetBackup. If an item listed below will cause significant business impacts, contact your Veritas Sales Account Team. Please note that the official NetBackup Support Lifecycle for your existing NetBackup product version won't be affected or altered in any way. For the official Veritas Support Lifecycle Policy of all NetBackup versions, see https://www.veritas.com/content/support/en_US/terms/support-fundamentals.html.
Information in the following table contains plans starting with NetBackup 7.5. For information concerning no longer supported platforms, consult the following section of the report.
Information in the following table was last updated on 2023-10-23.
Date Added/Modified | Feature/Functionality/OS/Platform | NetBackup Area | OS/Platform | OS/Platform Version | CPU Architecture | Last Supported Release | Notes |
2022-04-19 | All | OpsCenter | All | All | All | 10.0.0.1 | |
2021-06-03 | VMware Cloud Director 9.0, 9.1, 9.5 | All | All | All | All | 9.0.0.1 | VMware Cloud Director 9.0, 9.1, 9.5 to be not supported from NetBackup 9.1 onwards. |
- NetBackup Software Compatibility Documentation:
- NetBackup 8.0 - 8.x.x Operating System Software Compatibility List (last updated on March 11, 2024)
- 8.0 - 8.x.x OS Software Compatibility List Updates
End of Life (EOL) announcement and platforms no longer supported by NetBackup | Back to top |
- The following Operating System and Application Versions/Architectures in the 8.x.x versions of NetBackup will be End of Life.
Platform and Application Versions | CPU Architecture | OS Bits | NetBackup | Last NetBackup Release Supported |
Red Hat Enterprise Linux (RHEL) 6.8, 6.9 and 6.10 | ALL | 64 | Master, Media and Client | 8.3 |
SUSE Linux Enterprise Server 11 | ALL | 64 | Master, Media and Client | 8.2 |
SUSE Linux Enterprise Server 12 SP2 or older | ALL | 64 | Master, Media and Client | 8.2 |
Windows 7 | ALL | 64 | Client | 8.2 |
Windows Vista | ALL | 64 | Client | 8.2 |
Windows Server 2008 and 2008 R2 | ALL | 64 | Master, Media and Client | 8.2 |
Red Hat Enterprise Linux and SUSE Linux Enterprise Server | z/Architecture | 64 | Media Server | 8.2 |
VMware vSphere 5.5 | x86-64 | 64 | VMware Agent | 8.1.2 |
Hewlett Packard Enterprise HP-UX (All Versions) | IA64 | 64 | Master and Media Server | 8.1.1 |
IBM AIX (All Versions) | POWER | 64 | Master and Media Server | 8.1.1 |
Red Hat Enterprise Linux (RHEL) 6.7 or older | x86-64 | 64 | Master, Media and Client | 8.1.1 |
CentOS 6.7 or older | x86-64 | 64 | Media and Client | 8.1.1 |
Oracle Linux 6.7 or older | x86-64 | 64 | Media and Client | 8.1.1 |
- NetBackup Software Compatibility Documentation:
- NetBackup 8.0 - 8.x.x Operating System Software Compatibility List (last updated on March 11, 2024)
- 8.0 - 8.x.x OS Software Compatibility List Updates
Documentation | Back to top |
Product Documentation
- NetBackup 8.2 API - Getting Started
- - NetBackup Documentation Landing Page (Including links for all PDFs individually, and PDFs in a single .zip file)
- NetBackup 8.2 Administrator's Guide, Volume II
- NetBackup 8.2 Administrator's Guide, Volume I
- NetBackup Add-in for Microsoft SCVMM Console Guide
- NetBackup AdvancedDisk Storage Solutions Guide
- NetBackup Cloud Administrator's Guide
- NetBackup Commands Reference Guide
- NetBackup Deduplication Guide
- NetBackup for DB2 Administrator's Guide
- NetBackup for Hyper-V Administrator's Guide
- NetBackup for Lotus Notes Administrator's Guide
- NetBackup for Microsoft SharePoint Server Administrator's Guide
- NetBackup for Microsoft SQL Server Administrator's Guide
- NetBackup for Nutanix Acropolis Hypervisor (AHV) Administrator's Guide
- NetBackup for OpenStack Administrator's Guide
- NetBackup for Oracle Administrator's Guide
- NetBackup for VMware Administrator's Guide
- NetBackup in Highly Available Environments Administrator's Guide
- NetBackup Installation Guide
- NetBackup Network Ports Reference Guide
- NetBackup OpenStorage Solutions Guide for Disk
- NetBackup OpsCenter 8.2 Administrator's Guide
- NetBackup Plug-in for VMware vSphere Client (HTML5) Guide
- NetBackup Replication Director Solutions Guide
- NetBackup Security and Encryption Guide
- NetBackup Self Service Configuration Guide
- NetBackup Self Service Installation Guide
- NetBackup Snapshot Client Administrator's Guide
- NetBackup Status Codes Reference Guide
- NetBackup Troubleshooting Guide
- NetBackup Upgrade Portal
- NetBackup Vault Administrator's Guide
- NetBackup Web UI Backup Administrator's Guide
- NetBackup Web UI Cloud Administrator's Guide
- NetBackup Web UI RHV Administrator's Guide
- NetBackup Web UI Security Administrator's Guide
- NetBackup Web UI VMware Administrator's Guide
- NetBackup WebSocket Service (NBWSS) Reference Guide
- Veritas NetBackup Emergency Engineering Binary Guide
- Veritas NetBackup for MariaDB Administrator's Guide
- Veritas NetBackup for MySQL Administrator's Guide
- Veritas NetBackup for PostgreSQL Administrator's Guide
- Veritas NetBackup for SQLite Administrator's Guide
- Veritas Service and License Agreements
- Veritas Smart Meter Getting Started Guide
Installation/Upgrade Documentation
- How to perform a consistency check of the NetBackup EMM and BMR databases
- Links to the latest NBCC / NBCCR downloads
- NetBackup Replication Director Tools for NetApp Storage Systems
- NetBackup Upgrade Guide
- Veritas NetBackup Upgrade Quick Start Guide
- What's new in NetBackup releases
- NetBackup Release Notes
- NetBackup Self Service Release Notes
- Veritas Download Center
Late Breaking News
Compatibility Lists
Performance and Tuning Guidelines
- ERROR CODE: error 26 bpbrm jobs failing with status 26
- Information on resource allocation within NetBackup
- Insufficient system file descriptors can cause performance issues and possible growth in the EMM_DATA.db file
- Minimum O/S ulimit settings on UNIX platforms
- NetBackup OpsCenter Performance and Tuning Guide
- NetBackup pre-install check detects insufficient space to perform upgrade
- Recommended NetBackup UNIX / Linux semaphore tuning values (Linux/Solaris/HP-UX/AIX)
Product End of Life Information
Other Related Documentation