This platform is supported only as a client.
  
Important Notes  Back to top
No new versions for NetBackup OpsCenter after 10.0.0.1

NetBackup 10.0 (including maintenance release 10.0.0.1) is the last NetBackup version to include NetBackup OpsCenter and OpsCenter Analytics.
Please refer to NetBackup OpsCenter last release and transition to NetBackup IT Analytics FAQ for more information.

Notes about Smart Meter in NetBackup 8.1.2

Smart Meter is a cloud-based application enabled by NetBackup 8.1.2 that provides real-time and accurate capacity usage categorized by workload. This new capability allows customers to proactively manage capacity and stay in compliance, and gives Veritas and its partners visibility into customer usage, which enables true-up conversations on an ongoing basis. NetBackup 8.1.2+ requires a Smart Meter registration key on each master server. You must obtain these keys and have them available during the installation or upgrade of your master server. To download these keys and learn more about Smart Meter, visit Veritas Smart Meter.

The End of Life (EOL) for NetBackup Master and Media Servers running on HPUX and AIX after NetBackup 8.1.1

Disclaimer: The End of Life (EOL) for NetBackup Master and Media Servers running on HPUX and AIX. This EOL does not apply to client support for either platform. These operating systems will no longer be supported commencing with the planned NetBackup release in mid CY2018.
Customers will need to migrate to a supported version of either a Linux or Solaris prior to attempting to upgrade to the planned End of Life release. To enable this NetBackup Engineering plans to release either a process or tool to assist customers in migrating from these platforms to a supported platform. Customers can also request a cost quote from Veritas Consulting services to perform the migration or if the customer has Business Critical Services (BCS) they can contract the BCS team for migration assistance.
Both platforms will remain supported on older versions of NetBackup and will follow the published Product End of Life Policy guidelines (https://www.veritas.com/support/en_US/article.000116439).

The End of Life (EOL) for NetBackup running on RedHat, Oracle and CentOS 6.7 and older after NetBackup 8.1.1

Disclaimer: The End of Life (EOL) for NetBackup running on RedHat, Oracle and CentOS 6.7 and older after NetBackup 8.1.1. These operating systems will no longer be supported commencing with the planned NetBackup release in mid CY2018. No changes in support to 6.8 and newer versions.

  
Install Information Back to top
Get ready for a newer version of NetBackup (10.3.0.1)
Procedure Overview:
  
Compatibility between NetBackup versions for Client Back to top
  • For compatibility between major versions, the latest available release of NetBackup is compatible with media servers and clients that run a release of NetBackup that is up to one major version behind. However, this compatibility ceases to be supported in any configuration once the previous major version has reached its End of Support Life.
    For information on Veritas End of Life Policy, refer to https://www.veritas.com/support/en_US/article.000116439
  • NetBackup does not support any scenario where a media server or client runs a software release update version that is higher than that of their Master server.
    For more information, refer to the NetBackup Release Notes and the NetBackup Upgrade Guide: https://www.veritas.com/support/en_US/article.000116412
    NetBackup Master Server NetBackup Media Server NetBackup Client
    8.07.07.0
    8.07.0.17.0, 7.0.1
    8.07.1, 7.1.0.x7.0, 7.0.1, 7.1, 7.1.0.x
    8.07.5, 7.5.0.x7.0, 7.0.1, 7.1, 7.1.0.x, 7.5, 7.5.0.x
    8.07.6, 7.6.0.x7.0, 7.0.1, 7.1, 7.1.0.x, 7.5, 7.5.0.x, 7.6, 7.6.0.x
    8.07.6.1, 7.6.1.x7.0, 7.0.1, 7.1, 7.1.0.x, 7.5, 7.5.0.x, 7.6, 7.6.0.x,7.6.1,7.6.1.x
    8.07.77.0, 7.0.1, 7.1, 7.1.0.x, 7.5, 7.5.0.x, 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7
    8.07.7.17.0, 7.0.1, 7.1, 7.1.0.x, 7.5, 7.5.0.x, 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1
    8.07.7.27.0, 7.0.1, 7.1, 7.1.0.x, 7.5, 7.5.0.x, 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2
    8.07.7.37.0, 7.0.1, 7.1, 7.1.0.x, 7.5, 7.5.0.x, 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3
    8.08.07.0, 7.0.1, 7.1, 7.1.0.x, 7.5, 7.5.0.x, 7.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3, 8.0
    8.17.77.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7
    8.17.7.17.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1
    8.17.7.27.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2
    8.17.7.37.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3
    8.18.07.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3, 8.0
    8.18.17.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3, 8.0, 8.1
    8.1.17.77.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7
    8.1.17.7.17.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1
    8.1.17.7.27.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2
    8.1.17.7.37.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3
    8.1.18.07.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3, 8.0
    8.1.18.17.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3, 8.0, 8.1
    8.1.18.1.17.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3, 8.0, 8.1, 8.1.1
    8.1.27.77.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7
    8.1.27.7.17.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1
    8.1.27.7.27.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2
    8.1.27.7.37.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3
    8.1.28.07.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3, 8.0
    8.1.28.17.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3, 8.0, 8.1
    8.1.28.1.17.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3, 8.0, 8.1, 8.1.1
    8.1.28.1.27.6, 7.6.0.x,7.6.1,7.6.1.x, 7.7, 7.7.1, 7.7.2, 7.7.3, 8.0, 8.1, 8.1.1, 8.1.2
    8.28.07.7.3, 8.0
    8.28.17.7.3, 8.0, 8.1
    8.28.1.17.7.3, 8.0, 8.1, 8.1.1
    8.28.1.27.7.3, 8.0, 8.1, 8.1.1, 8.1.2
    8.28.27.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2
    8.38.07.7.3, 8.0
    8.38.17.7.3, 8.0, 8.1
    8.38.1.17.7.3, 8.0, 8.1, 8.1.1
    8.38.1.27.7.3, 8.0, 8.1, 8.1.1, 8.1.2
    8.38.27.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2
    8.38.37.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3
    8.38.3.0.17.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3, 8.3.0.1
    8.38.3.0.27.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3, 8.3.0.1, 8.3.0.2
    8.3.0.18.17.7.3, 8.0, 8.1
    8.3.0.18.1.17.7.3, 8.0, 8.1, 8.1.1
    8.3.0.18.1.27.7.3, 8.0, 8.1, 8.1.1, 8.1.2
    8.3.0.18.27.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2
    8.3.0.18.37.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3
    8.3.0.18.3.0.17.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3, 8.3.0.1
    8.3.0.18.3.0.27.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3, 8.3.0.1, 8.3.0.2
    8.3.0.28.17.7.3, 8.0, 8.1
    8.3.0.28.1.17.7.3, 8.0, 8.1, 8.1.1
    8.3.0.28.1.27.7.3, 8.0, 8.1, 8.1.1, 8.1.2
    8.3.0.28.27.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2
    8.3.0.28.37.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3
    8.3.0.28.3.0.17.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3, 8.3.0.1
    8.3.0.28.3.0.27.7.3, 8.0, 8.1, 8.1.1, 8.1.2, 8.2, 8.3, 8.3.0.1, 8.3.0.2
  • Other general rules for compatibility:
    • OpsCenter/OpsCenter Analytics must always be running the same or higher Dot-Zero or Single-Dot or Double-Dot release as the master servers in the environment.
    • All components (master, media, client, console, and agent) on an individual system must be at the same version.
    • Backup images created under an older version of NetBackup will always be recoverable with a newer version of NetBackup
    • A new feature may not be functional until the master, media and client are updated.
    • Administration Consoles cannot be at an earlier version than the NetBackup server version they connect to via the "change server" functionality in the console
  
Late Breaking News - Available Hot Fixes for Client Back to top
Available hot fixes - for details and download information, consult the Update link in the table.

For more information about installation instructions, please review NetBackup 8.2 on Support site.
    Hot Fix Description Install Location
    UPD238422Bare Metal Restore Third-Party Products CD (3PPCD)Primary(Master) Server, Media Server, Client
    UPD344759NetBackup Java Administration Console Language Pack (article 100033052) Java Administration Console
    UPD102990NetBackup Self Service 8.2 MR2Primary(Master) Server, Media Server, Client
    UPD697144NetBackup Self Service 8.2 MR1Primary(Master) Server, Media Server, Client
    UPD751814NetBackup tool - NetBackup Catalog Consistency Repair Utility (NBCCR) (article 100005779)Primary(Master) Server, Media Server, Client
    UPD113412NetBackup 8.2 / 3.2 - Java version 1.8.0_251 (Etrack 4002141)Primary(Master) Server, Media Server, Client
    UPD881086NetBackup 8.2/3.2 Hotfix - Deliver JRE 1.8.0_241 (Etrack 3993649)Primary(Master) Server, Media Server, Client
    UPD171508NetBackup 8.2 / 3.2 Hotfix - MSDP EEB Bundle (Etrack 3981133)Primary(Master) Server, Media Server, Client
    UPD704001NetBackup 8.2/3.2 Hotfix -VMware backups crashes with status 50 occasionally on VM guests with XFS filesystems (Etrack -3993809).Primary(Master) Server, Media Server, Client
    UPD754616NetBackup 8.2 / 3.2 HotFix - EEB Bundle containing multiple nbsl and nbsl.exe fixes (Etrack 4002172)Primary(Master) Server, Media Server, Client
    UPD905141NetBackup 8.2 Hotfix - Java vulnerabilities in JRE (Etrack 3983638)Primary(Master) Server, Media Server, Client
    UPD305311NetBackup 8.2 Hotfix - Java Error 8021: unable to validate user or group for certificate management (Etrack 3985912)Primary(Master) Server, Media Server, Client
    UPD509141NetBackup 8.2 Hotfix - upgrade to VDDK 6.7.3 (Etrack 3985258)Primary(Master) Server, Media Server, Client
    UPD732180NetBackup 8.2 Hotfix - Slow MPX to tape after checkpoint unless DBM_NEW_IMAGE_DELAY = 1000 (Etrack 3997921)Primary(Master) Server, Media Server, Client
    UPD368923NetBackup 8.2/3.2 Hotfix - Slow replication jobs due to oversubscription (Etrack 3987486)Primary(Master) Server, Media Server, Client
    UPD395269NetBackup 8.2 Hotfix - upgrade libssh2 (Etrack 3983345)Primary(Master) Server, Media Server, Client
    UPD118880NetBackup 8.2 Hotfix - upgrade libcurl (Etrack 3983396)Primary(Master) Server, Media Server, Client
    UPD222595NetBackup 8.2 / 3.2 HotFix - HSTS Missing From HTTPS Server on Appliance (Etrack 4016984)Primary(Master) Server, Media Server, Client
    UPD829026NetBackup 8.2 / 3.2 Hotfix - Backups fail with status 50 and 150 under load after upgrade to 8.2 (Etrack 3983739)Primary(Master) Server, Media Server, Client
    UPD757732NetBackup 8.2 Hotfix - Cluster inoperable when configureCerts fails to renew Tomcat certificate (Etrack 3988675)Primary(Master) Server, Media Server, Client
    UPD255190NetBackup 8.2 HotFix - Upgrade of OpenSSL on Windows Master or Media Server (ET 4020077)Primary(Master) Server, Media Server, Client
    UPD450754NetBackup 8.2 HotFix - Upgrade of OpenSSL on NetBackup Windows Clients (ET 4021217)Primary(Master) Server, Media Server, Client
    UPD368014NetBackup 8.2 / 3.2 Hotfix - VMware virtual machine entered into emergency mode at first boot after successful restore. (Etrack 4032016)Primary(Master) Server, Media Server, Client
    UPD557376NetBackup 8.2 / 3.2 HotFix - EEB Bundle for nbdeployutil, netbackup.war, libVdb, and 2.17.1 Apache Log4j addressing CVE-2021-44228 and CVE-2021-45046 (Etrack 4021776)Primary(Master) Server, Media Server, Client
    UPD141452NetBackup 8.2 HotFix - Failure to install ADK 8.1 while creating the first Shared Resource Tree (SRT) on a NetBackup Bare Metal Restore (BMR) boot server(Etrack 4035231)Primary(Master) Server, Media Server, Client
    UPD574079VTS22-010 - Hotfix for Security Advisory impacting NetBackup 8.2 Clients (Etrack 4078504)Primary(Master) Server, Media Server, Client
    UPD621711VTS22-011 & VTS22-010 - Hotfix for Security Advisory impacting NetBackup 8.2 and Appliance 3.2 Master and Media Server (Etrack 4069659)Primary(Master) Server, Media Server, Client
    UPD726089NetBackup 8.2 Hotfix - Upgrade RabbitMQ to version 3.7.23 (Etrack 4041997)Primary(Master) Server, Media Server, Client
    UPD874768VTS22-015 - Hotfix for Security Advisory impacting NetBackup 8.2 Clients (Etrack 4090406)Primary(Master) Server, Media Server, Client
    UPD258907VTS22-015 - Hotfix for Security Advisory impacting NetBackup 8.2 and Appliance 3.2 Primary and Media Server (Etrack 4090407)Primary(Master) Server, Media Server, Client
    UPD162444NetBackup Primary Server Migration Tool 2.3.1Primary(Master) Server, Media Server, Client
    UPD714038NetBackup 8.1.2 - 10.1.1 - nbdb_unload performance impact when upgrading to NetBackup 10.2 or abovePrimary(Master) Server, Media Server, Client
NetBackup Documentation References:
  
Patches for Operating System for Client Back to top
Required PatchesThere is no information found for this section.
  
NetBackup Appliances Back to top
  • NetBackup Appliances are Veritas-branded devices offering backup and deduplication solutions for enterprise environments in an appliance form factor. For more information, see the "NetBackup Appliances" page.
NetBackup 5200 Series (Primary/Media Server/CloudCatalyst), 5300 Series (Media Server), Virtual, and Flex Appliances
  • The following tables list NetBackup 5200 Series, 5300 Series, and Virtual release versions, the Appliance models supported with each version, and the NetBackup Release version on which it is based.
  • There is also a table listing NetBackup Flex Appliance versions, the Appliance models supported with each version, and the Primary Server and Media Server versions supported with each version.
  • NOTE: References to NetBackup 5200 and 5220 Appliances have been removed from this document since these models are no longer supported.
NetBackup 5300 Series - Supported Versions
    NetBackup 5300 Series Appliance Release Supported NetBackup Appliance Models Based on NetBackup Release
    3.3.0.15340, 53308.3.0.1
    3.25340, 53308.2
    3.1.25340, 53308.1.2
    3.1.15340, 53308.1.1
    3.15340, 53308.1
    3.053308.0
NetBackup 5200 Series - Supported Versions
    NetBackup 5200 Series Appliance Release Supported NetBackup Appliance Models Based on NetBackup Release
    3.3.0.15250, CloudCatalyst 5240, 5240, 52308.3.0.1
    3.25250 , CloudCatalyst 5240, 5240, 5230[1]8.2
    3.1.2CloudCatalyst 5240, 5240, 52308.1.2
    3.1.1CloudCatalyst 5240, 5240, 52308.1.1
    3.1CloudCatalyst 5240, 5240, 52308.1
    3.05240, 52308.0
Footnotes
  • 1. The Veritas 5250 Appliance requires a revised version of 3.2.
NetBackup Virtual Appliance - Supported Versions
    NetBackup Virtual Appliance Release Based on NetBackup Release Supported Platforms
    3.3.0.18.3.0.1vSphere 6.0, 6.5, 6.7, 7.0
    3.28.2vSphere 6.0, 6.5, 6.7
    3.1.28.1.2vSphere 5.5, 6.0, 6.5
    3.1.18.1.1vSphere 5.5, 6.0, 6.5
    3.18.1vSphere 5.5, 6.0, 6.5
    3.08.0vSphere 5.5, 6.0
NetBackup Flex Appliance - Supported Versions
    NetBackup Flex Appliance Release Supported NetBackup Appliance Models Supported NetBackup Primary Server Versions Supported NetBackup Media Server Versions WORM (OST Target)
    2.1.25350 (Configuration A, B, C), 5340 (Configuration A, B, C, D, E, F, G, H, J), 5250 (Configuration A, B, C, D, E, F), 515010.1, 10.0.0.1, 10.0, 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.110.1, 10.0.0.1, 10.0, 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.117.0, 16.0.1, 16.0, 15.0.2, 15.0, 14.0.1, 14.0, 13.0.2, 13.0.1.1[1][2][3][4][5][6][7][8]
    2.1.15350 (Configuration A, B, C), 5340 (Configuration A, B, C, D, E, F, G, H, J), 5250 (Configuration A, B, C, D, E, F), 515010.1, 10.0.0.1, 10.0, 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.110.1, 10.0.0.1, 10.0, 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.117.0, 16.0.1, 16.0, 15.0.2, 15.0, 14.0.1, 14.0, 13.0.2, 13.0.1.1[1][2][3][4][5][6][7][8]
    2.15350 (Configuration A, B, C), 5340 (Configuration A, B, C, D, E, F, G, H, J), 5250 (Configuration A, B, C, D, E, F), 515010.0.0.1, 10.0, 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.110.0.0.1, 10.0, 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.116.0.1, 16.0, 15.0.2, 15.0, 14.0.1, 14.0, 13.0.2, 13.0.1.1[1][2][3][4][5][6][7]
    2.0.15350 (Configuration A, B, C), 5340 (Configuration A, B, C, D, E, F, G, H, J), 5250 (Configuration A, B, C, D, E, F), 51509.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.19.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.115.0.2, 15.0, 14.0.1, 14.0, 13.0.2, 13.0.1.1[1][2][3][4][5]
    2.05340 (Configuration A, B, C, D, E, F, G, H, J), 51509.0.0.1, 9.0, 8.3.0.2, 8.3.0.1, 8.29.0.0.1, 9.0, 8.3.0.2, 8.3.0.1, 8.214.0.1, 14.0, 13.0.2, 13.0.1.1[1][2][3]
    1.3.15340 (Configuration A), 51508.3.0.1, 8.2, 8.1.2, 8.1.1, 8.1[9]8.3.0.1, 8.2, 8.1.2, 8.1.1, 8.1[9]Not supported
    1.35340 (Configuration A), 51508.3.0.1, 8.2, 8.1.2, 8.1.1, 8.1[9]8.3.0.1, 8.2, 8.1.2, 8.1.1, 8.1[9]Not supported
Footnotes
  • 1. WORM storage server version 13.0.2 requires NetBackup primary and media server version 8.3.0.2 or later.
  • 2. WORM storage server version 14.0 requires NetBackup primary and media server version 9.0 or later.
  • 3. WORM storage server version 14.0.1 requires NetBackup primary and media server version 9.0.0.1 or later.
  • 4. WORM storage server version 15.0 requires NetBackup primary and media server version 9.1 or later.
  • 5. WORM storage server version 15.0.2 requires NetBackup primary and media server version 9.1.0.1 or later.
  • 6. WORM storage server version 16.0 requires NetBackup primary and media server version 10.0 or later.
  • 7. WORM storage server version 16.0.1 requires NetBackup primary and media server version 10.0.0.1 or later.
  • 8. WORM storage server version 17.0 requires NetBackup primary and media server version 10.1 or later.
  • 9. Veritas strongly recommends running NetBackup 8.2 or later with Flex Appliance.
Configuring Cloud Solutions with NetBackup CloudCatalyst Appliances
  • The table below shows when a NetBackup cloud configuration and device mappings RPM package is required for configuring cloud providers with NetBackup CloudCatalyst Appliances. "Included in release" means that version of the NetBackup Appliance software contains the information needed for configuring that cloud provider, so installing an RPM is not required.
  • Configuration for the cloud storage provider must be done using the Cloud Storage Configuration wizard in the NetBackup Administration Console. After this configuration is completed, you must manually create a backup policy for the deduplication (MSDP) pool catalog. For details, see the "NetBackup 52xx Appliance Initial Configuration Guide".
When to install a Cloud Configuration/Device Mappings RPM for NetBackup CloudCatalyst Appliance
    Cloud solution NetBackup Appliances running 3.2 NetBackup Appliances running 3.3.0.1
    ACP CS3 (S3)Included in releaseIncluded in release
    Alibaba Cloud Object Storage Service (OSS) (S3)Included in releaseIncluded in release
    Amazon Glacier (S3)Included in releaseIncluded in release
    Amazon Glacier Deep Archive (S3)Included in releaseIncluded in release
    Amazon GovCloud Glacier (S3)Included in releaseIncluded in release
    Amazon GovCloud Glacier Deep Archive (S3)Included in releaseIncluded in release
    Amazon GovCloud Simple Storage Service (S3)Included in releaseIncluded in release
    Amazon GovCloud Simple Storage Service - Infrequent Access (S3)Included in releaseIncluded in release
    Amazon Simple Storage Service (S3)Included in releaseIncluded in release
    Amazon Simple Storage Service - Infrequent Access (S3)Included in releaseIncluded in release
    Amazon Simple Storage Service - OneZone-Infrequent Access (S3)Included in releaseIncluded in release
    AT&T Cloud Storage (S3)Included in releaseIncluded in release
    China Mobile CMCC Cloud Storage (S3)Included in releaseIncluded in release
    China Telecom OOS (S3)Included in releaseIncluded in release
    Chunghwa Telecom Hicloud S3 (S3)Included in releaseIncluded in release
    Cloudian HyperStore Object Storage (S3)Included in releaseIncluded in release
    Dell EMC Elastic Cloud Storage (S3)Included in releaseIncluded in release
    Deutsche Telekom Open Telekom Cloud (S3)Included in releaseIncluded in release
    Fujitsu ETERNUS CD10000 (S3)Included in releaseIncluded in release
    Google Cloud Storage - Multi-Regional (S3)Included in releaseIncluded in release
    Google Cloud Storage - Regional (S3)Included in releaseIncluded in release
    Google Cloud Storage Coldline (S3)Included in releaseIncluded in release
    Google Cloud Storage Nearline (S3)Included in releaseIncluded in release
    Hitachi Vantara Content Platform (HCP) (S3)Included in releaseIncluded in release
    Hitachi Vantara Cloud Scale (S3)Not SupportedIncluded in release
    IBM Cloud Object Storage - Cold Vault (S3)Included in releaseIncluded in release
    IBM Cloud Object Storage - Flex (S3)Included in releaseIncluded in release
    IBM Cloud Object Storage - Private (S3)Included in releaseIncluded in release
    IBM Cloud Object Storage - Standard (S3)Included in releaseIncluded in release
    IBM Cloud Object Storage - Vault (S3)Included in releaseIncluded in release
    Infoniqa SWISS3CLOUD (S3)Included in releaseIncluded in release
    Kingsoft Standard Storage Service (KS3) - Standard (S3)Included in releaseIncluded in release
    Kingsoft Standard Storage Service (KS3) - Standard IA (S3)Included in releaseIncluded in release
    Microsoft Azure (Azure)Included in releaseIncluded in release
    Microsoft Azure Germany (Azure)Included in releaseIncluded in release
    Microsoft Azure Government (Azure)Included in releaseIncluded in release
    NEC Cloud IaaS (S3)Included in releaseIncluded in release
    NEC HYDRAstor HS3 and HS8 (4th Gen), iStorage HS3 and HS8 (4th Gen) and NEC Storage HS3 and HS8 (4th Gen) (S3)Included in releaseIncluded in release
    NEC HYDRAstor HS3 and HS8 (5th Gen), iStorage HS3 and HS8 (5th Gen) and NEC Storage HS3 and HS8 (5th Gen) (S3)Included in releaseIncluded in release
    NetApp StorageGRID Webscale Object Storage (S3)Included in releaseIncluded in release
    NooBaa (S3)Included in releaseIncluded in release
    Nutanix Objects (S3)Not supportedIncluded in release
    Oracle Cloud Infrastructure (S3)Included in releaseIncluded in release
    Orange Business Services Flexible Engine OBS (S3)Not supportedIncluded in release
    Quantum Active Archive and ActiveScale Systems (S3) (formerly HGST)Included in releaseIncluded in release
    Quantum Lattus Object Storage (S3)Included in releaseIncluded in release
    Red Hat Ceph Storage (S3)Included in releaseIncluded in release
    SandStone MOS (S3)Not supportedrIncluded in release
    Scality RING Storage (S3)Included in releaseIncluded in release
    SUSE Enterprise Storage (S3)Included in releaseIncluded in release
    SwiftStack Object Storage (S3)Included in releaseIncluded in release
    Telefonica Open Cloud (S3)Included in releaseIncluded in release
    Veritas Access (S3)Included in releaseIncluded in release
    Veritas Access 3340 Appliance (S3)Included in releaseIncluded in release
NetBackup 5200 Series, 5300 Series, and Virtual Appliance Supported Functionality
NetBackup 5200 Series, 5300 Series, and Virtual Appliances - Supported Functionality
    Functionality Minimum Appliance Release Supported Appliance Models Notes
    NetBackup Primary/Media Server3.25200 Series, VirtualThe Primary Server role is only supported on 5200 Series and Virtual Appliances. Key Management Service (KMS) and NetBackup Access Control (NBAC) are not supported when the Appliance is configured as a Primary Server.
    NetBackup Media Server3.25200 Series, 5300 Series, VirtualThe Primary Server in the NetBackup domain must be running a version of NetBackup equal to or newer than the NetBackup version on which the appliance is based.
    NetBackup CloudCatalyst Appliance3.25240 (Configuration G with 192 GB of memory), Virtual 
    Accelerator (for files and folders)3.25200 Series, 5300 Series, Virtual 
    Accelerator with NDMP3.25200 Series, 5300 Series, VirtualSupported with Dell EMC Isilon Scale-Out NAS filers, and NetApp AFF, FAS, and V series filers.

    When using this feature with a NetBackup Virtual Appliance, monitor the /dev/mapper/system-log partition to ensure it does not exceed 50% of capacity, and manage log files to increase remaining partition capacity. For information on managing accelerator track log files, see "About the track log for Accelerator for NDMP" .

    For more information on this feature, see the "About NetBackup Accelerator for NDMP" .
    Accelerator with VMware-type policies3.25200 Series, 5300 Series, Virtual 
    Auto Image Replication to MSDP/5200 Series or 5300 Series over Ethernet3.25200 Series, 5300 Series, Virtual 
    Auto Image Replication to MSDP/5200 Series or 5300 Series over Fibre Channel (FC)3.25200 Series, 5300 Series 
    Auto Image Replication to PDDO/5000 Series3.25200 Series, 5300 Series, Virtual 
    Client Deduplication / Client Direct over Ethernet3.25200 Series, 5300 Series, VirtualVeritas allows NetBackup Clients to write data directly to NetBackup Storage Server Appliances. The client hosts the deduplication plug-in that deduplicates the backup data. The plug-in sends only unique segments to the Storage Server, reducing network traffic and distributing CPU load. For the list of supported clients, see the "Deduplication Supported Operating Systems" section of the "NetBackup 8.0 - 8.x.x Operating System Software Compatibility List" .
    Copilot for Oracle3.25230, 5240, 5250, 5330, 5340, VirtualFor more information on this feature, see the "NetBackup Copilot for Oracle Configuration Guide" .
    Fibre Transport Media Server3.25230, 5240, 5250, 5330, 5340Supported with 8 Gb HBAs in NetBackup 5230, 5240, 5250, 5330, and 5340 Appliances.

    Supported with 16 Gb HBAs in NetBackup 5240 and 5340 Appliances.
    FIPS-compliant encryption3.25200 Series, 5300 Series, VirtualFIPS-compliant encryption, as defined by the Federal Information Processing Standards 140-2, can be enabled from the NetBackup Shell Menu. For more information, see the "NetBackup Appliance Security Guide" .
    Granular Recovery Technology (GRT)3.25200 Series, 5300 Series, Virtual 
    Granular Recovery Technology (GRT) with VMware-type policies3.25200 Series, 5300 Series, VirtualSupport for VMware-type backup policies with Application Protection options enabled for Exchange or SharePoint.
    Instant Data Access3.25230, 5240, 5250, 5330, 5340This feature allows you to create an Instant Access VM from a NetBackup backup image. The VM is available almost instantaneously, achieving a near-zero recovery time objective. NetBackup mounts the VM snapshot directly on the backup storage device to allow your ESXi host or cluster to treat the snapshot as a normal VM. For more information, see the "NetBackup Web UI VMware Administrator's Guide" .
    Instant Recovery for VMware3.25200 Series, 5300 Series, VirtualSupport for restoring virtual machines with Instant Recovery is described in the "NetBackup for VMware Administrator's Guide" .

    For details on supported platforms for instant recovery restore hosts, see "Support for NetBackup 7.7.x, 8.x, and 9.x in virtual environments" .
    iSCSI Initator - Hardware-assisted with TCP Offload Engine (TOE) card3.25240 (Configuration H), 5340 (Configurations A, B, C, D, and E)Supports backup of VMware virtual machines using VADP with SAN transport.

    For more information on this feature, see the "NetBackup Appliance iSCSI Guide" and the "NetBackup for VMware Administrator's Guide" .
    Key Management Service (KMS)3.25200 Series, 5300 SeriesKMS is supported with Appliances configured as either a Primary or a Media Server. With a NetBackupCLI administrator account in the NetBackup Appliance Shell Menu, an Appliance Primary Server can administrate KMS with tape devices connected to itself or another NetBackup Appliance. Regenerating the data encryption key is the only supported method of recovering KMS on an Appliance Primary Server.
    NetBackup Access Control (NBAC)3.25200 Series, 5300 SeriesSupported when the Appliance is configured as a Media Server only.

    Not supported when the Appliance is configured as a Primary Server.
    NDMP3.25200 Series, 5300 Series, VirtualSupported NDMP solutions are listed in the NDMP devices Vendor Compatibility section.
    NetBackup Cluster  There are no plans to support this feature.
    NetBackup OpenStorage Cloud and Third-Party Plug-in Support3.25200 Series, 5300 Series, VirtualSupported plug-ins are listed in the "Support with NetBackup Appliance" tables shown in the OST Cloud and OST Storage Servers Vendor Compatibility sections.


    For instructions on installing vendor plug-in packages on NetBackup Appliances, see "About OpenStorage plugin installation" .
    OpsCenter3.25200 Series, 5300 Series, Virtual 
    OpsCenter Managed Server3.25200 Series, 5300 Series, Virtual 
    Optimized Duplication (Opt_Dup) over Ethernet3.25200 Series, 5300 Series, VirtualSupported from 5200/5300 Series/Virtual to 5000 Series (MSDP to PDDO) and from 5200/5300 Series/Virtual to 5200/5300 Series/Virtual (MSDP to MSDP).
    Optimized Duplication (Opt_Dup) over Fibre Channel (FC)3.25200 Series, 5300 SeriesSupported from 5200/5300 Series to 5000 Series (MSDP to PDDO), and from 5200/5300 Series to 5200/5300 Series (MSDP to MSDP)
    Optimized Synthetics (Opt_Synth)3.25200 Series, 5300 Series, Virtual 
    Tape Drive Support3.25200 Series, 5300 SeriesSupported tape drives are listed in the "Support with NetBackup Appliance" tables shown in the Tape Drives Vendor Compatibility section. Shared Storage Option (SSO) is supported.
    Tape Library Support3.25200 Series, 5300 SeriesSupported tape libraries are listed with the notes "This library is also supported with NetBackup 5200 Series and 5300 Series Appliances" and "This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter" in the Tape Libraries Vendor Compatibility section. Use the NetBackup Device Configuration Wizard within the NetBackup Adminstration Console to configure robots and tape drives on the NetBackup Appliance.
    Universal Shares3.25240, 5250, 5330, 5340For more information on configuring Universal Shares, see Manage > Storage > Universal Shares
    Virtual Tape Library (VTL) Support3.25200 Series, 5300 SeriesSupported VTLs are listed in the "Support with NetBackup Appliance" tables shown in the Virtual Tape Libraries Vendor Compatibility section. Use the NetBackup Device Configuration Wizard within the NetBackup Adminstration Console to configure VTLs and emulated tape drives on the NetBackup Appliance.
NetBackup 5000 Series Appliances (Deduplication)
  • The following table lists NetBackup 5000 Series release versions, the Appliance models supported with each version, and the equivalent Deduplication Appliance software versions. Documentation for NetBackup Appliances is available here. Late breaking news related to NetBackup Appliances is available here.
  • NOTE: References to NetBackup 5000 and 5020 Appliances have been removed from this document since these models are no longer supported.
NetBackup 5000 Series - Supported Versions
    NetBackup 5000 Series Appliance Release Supported NetBackup Appliance Models NetBackup 5000 Series Appliance Software Version
    1.4.550306.6.5
NetBackup 5000 Series Appliance Supported Functionality
  • The following table lists NetBackup 5000 Series supported functionality and indicates the Appliance software version at which that functionality was first supported.
NetBackup 5000 Series - Supported Functionality
    Functionality Minimum Appliance Release Supported Appliance Models Notes
    Accelerator (for files and folders)1.4.55030 
    Auto Image Replication1.4.55030 
    Call Home1.4.55030 
    Client Deduplication / Client Direct over Ethernet1.4.55030Veritas allows NetBackup Clients to write data directly to NetBackup Storage Server Appliances. The client hosts the deduplication plug-in that deduplicates the backup data. The plug-in sends only unique segments to the Storage Server, reducing network traffic and distributing CPU load. For the list of supported clients, see the "Deduplication Supported Operating Systems" section of the "NetBackup 8.0 - 8.x.x Operating System Software Compatibility List" .
    Fibre Channel support for PDDO1.4.55030 
    Granular Recovery Technology (GRT)1.4.55030 
    Intelligent Platform Management Interface (IPMI) support1.4.55030 
    NetBackup OST Storage Server1.4.55030Supported OpenStorage functionality and Media Server platforms are listed in the OST Storage Servers section of OST Secondary Storage Solutions.
    Optimized Duplication (Opt_Dup)1.4.55030 
    Optimized Duplication (Opt_Dup) from PDDO to MSDP1.4.55030Supported from 5000 Series to 5200/5300 Series.
    Optimized Synthetics (Opt_Synth)1.4.55030 
    PureDisk Remote Office Appliance1.4.55030Supported clients: Apple Mac OS, Hewlett Packard Enterprise HP-UX, IBM AIX, Microsoft Windows, SUSE Linux Enterprise Server, Red Hat Enterprise Linux, Oracle Solaris. Supported application agents: Microsoft Exchange, Microsoft SQL, Oracle. For specific versions see the "NetBackup PureDisk 6.6.1 Compatibility List" .
    Virtual Local Area Network (VLAN)1.4.55030 
  
NetBackup Self Service Back to top
  • Veritas NetBackup Self Service offers large enterprises and service providers a single store front for all backup and recovery service offerings. Customers and business users can perform self-service backup and restore operations using intuitive, custom-designed interface themes. A single instance supports the registration of multiple tenants or business units to allow secure separation between clients. Codeless, visually-designed forms and process workflows cater to most self-service needs. Service Level Agreement (SLA) measurement, notification, chargeback, and reporting make it easy to manage the service.
  • NetBackup Self Service OS Platform Compatibility

    NetBackup Self Service Versions Supported Platforms Supported Databases
    NetBackup Self Service 8.0Windows Server 2008 R2
    Windows Server 2012/2012 R2
    Microsoft SQL Server 2012
    Microsoft SQL Server 2014
    NetBackup Self Service 8.1Windows Server 2012/2012 R2
    Windows Server 2016
    Microsoft SQL Server 2012
    Microsoft SQL Server 2014
    Microsoft SQL Server 2016
    NetBackup Self Service 8.1.2Windows Server 2012/2012 R2
    Windows Server 2016
    Microsoft SQL Server 2012
    Microsoft SQL Server 2014
    Microsoft SQL Server 2016
    NetBackup Self Service 8.2Windows Server 2012/2012 R2
    Windows Server 2016
    Microsoft SQL Server 2012
    Microsoft SQL Server 2014
    Microsoft SQL Server 2016
    Microsoft SQL Server 2017
    Azure SQL database
    Microsoft SQL Server on Amazon RDS
    NetBackup Self Service 8.3Windows Server 2012 R2
    Windows Server 2016
    Windows Server 2019
    Microsoft SQL Server 2012
    Microsoft SQL Server 2014
    Microsoft SQL Server 2016
    Microsoft SQL Server 2017
    Azure SQL database
    Microsoft SQL Server on Amazon RDS
  • NetBackup Master Server Compatibility

    • NetBackup Self Service does not require the NetBackup client software to be installed on the Web server or SQL server, However it is recommended to have the NetBackup Client software Installed.
    • The master server version remains restricted to the Netbackup client version or later versions incase the NetBackup Client software is installed on the Web Server or SQL server.
    NetBackup Self Service Versions NetBackup Versions Appliance Versions
    NetBackup Self Service 8.0NetBackup 7.7
    NetBackup 7.7.1
    NetBackup 7.7.2
    NetBackup 7.7.3
    NetBackup 8.0
    NetBackup Appliance 2.7.1
    NetBackup Appliance 2.7.2
    NetBackup Appliance 2.7.3
    NetBackup Appliance 3.0

    NetBackup Virtual Appliance 3.0
    NetBackup Self Service 8.1NetBackup 7.7
    NetBackup 7.7.1
    NetBackup 7.7.2
    NetBackup 7.7.3
    NetBackup 8.0
    NetBackup 8.1
    NetBackup 8.1.1
    NetBackup Appliance 2.7.1
    NetBackup Appliance 2.7.2
    NetBackup Appliance 2.7.3
    NetBackup Appliance 3.0
    NetBackup Appliance 3.1
    NetBackup Appliance 3.1.1

    NetBackup Virtual Appliance 3.0
    NetBackup Self Service 8.1.2NetBackup 7.7
    NetBackup 7.7.1
    NetBackup 7.7.2
    NetBackup 7.7.3
    NetBackup 8.0
    NetBackup 8.1
    NetBackup 8.1.1
    NetBackup 8.1.2
    NetBackup Appliance 2.7.1
    NetBackup Appliance 2.7.2
    NetBackup Appliance 2.7.3
    NetBackup Appliance 3.0
    NetBackup Appliance 3.1
    NetBackup Appliance 3.1.1
    NetBackup Appliance 3.1.2

    NetBackup Virtual Appliance 3.0
    NetBackup Self Service 8.2NetBackup 8.0
    NetBackup 8.1
    NetBackup 8.1.1
    NetBackup 8.1.2
    NetBackup 8.2
    NetBackup Appliance 3.0
    NetBackup Appliance 3.1
    NetBackup Appliance 3.1.1
    NetBackup Appliance 3.1.2
    NetBackup Appliance 3.2

    NetBackup Virtual Appliance 3.0
    NetBackup Self Service 8.3NetBackup 8.0
    NetBackup 8.1
    NetBackup 8.1.1
    NetBackup 8.1.2
    NetBackup 8.2
    NetBackup 8.3
    NetBackup 8.3.0.1
    NetBackup Appliance 3.0
    NetBackup Appliance 3.1
    NetBackup Appliance 3.1.1
    NetBackup Appliance 3.1.2
    NetBackup Appliance 3.2
    NetBackup Appliance 3.3.0.1

    NetBackup Virtual Appliance 3.0
    NetBackup Virtual Appliance 3.3.0.1
  • VMware vCloud Director Compatibility

    • The NetBackup master server must also support the vCloud Director version
    Self Service Versions vCloud Director Versions
    NetBackup Self Service 8.05.5, 5.6, 8.0, 8.10, 8.20, 9.0
    NetBackup Self Service 8.15.5, 5.6, 8.0, 8.10, 8.20, 9.0
    NetBackup Self Service 8.1.25.5, 5.6, 8.0, 8.10, 8.20, 9.0
    NetBackup Self Service 8.25.5, 5.6, 8.0, 8.10, 8.20, 9.0, 9.1
    NetBackup Self Service 8.2 MR15.5, 5.6, 8.0, 8.10, 8.20, 9.0, 9.1, 9.5 , 9.7
    [1][1]
    NetBackup Self Service 8.35.5, 5.6, 8.0, 8.10, 8.20, 9.0, 9.1, 9.5 , 9.7 , 10.0 , 10.1
    [1][1][1][1]
Footnotes
  • 1. VMware vCloud Director 9.5 and later requires VMware vCenter servers versions 6.5 and later .
  • NetBackup Self Service Supported Web Browsers

    • Microsoft Edge
    • Microsoft Internet Explorer 11
    • Mozilla Firefox
    • Google Chrome
    • Apple Safari [not recommended]
  
Software Compatibility List (SCL) for Client Back to top
  • NetBackup Client is supported on Windows 10 Enterprise, Professional and Education Edition for x86-64 architecture (Intel 64 and AMD64).
    BMR Boot Server is not supported on Windows 10.
Microsoft Windows 10 - NetBackup Client
    OS CPU Architecture OS Bits NetBackup Client NetBackup Bits NBAC SAN Client Minimum NetBackup Level
    Windows 10x86-6464Y64Y 8.0
  
SAN Media Server/SAN Client/FT Media Server for Client Back to top
  • • Unless otherwise noted the minimum NetBackup level for SAN Client support is NetBackup 6.5 GA.
  • SAN style backups via SAN Media Server
  • SAN media servers are NetBackup media servers that back up their own data. SAN media servers cannot back up data that resides on other clients. SAN media servers are useful for certain situations. For example, a SAN media server is useful if the data volume consumes so much network bandwidth that it affects your network negatively.
    • Enables LAN-free data protection with high performance access to shared resources.
    • Can share tape resources with NetBackup Master and Media Servers.
    • Can only back itself up, not other clients.
    • Software is installed stand-alone on each cluster node and linked to the virtual host via an application cluster.
    • When you define a backup policy for a SAN media server, add only the SAN media server as the client.
    • The NetBackup Shared Storage Option is able to use NetBackup SAN media servers.
    • There is no platform restriction regarding SAN Media Servers - any Media Server can be a SAN Media Server. The only difference is in the license authentication mechanism. Application and DB Agents are supported with the SAN Media Server.
  • SAN style backups via SAN Client
  • A NetBackup SAN client is a NetBackup client on which the Fibre Transport service is activated. The SAN client is similar to the SAN media server that is used for the Shared Storage Option; it backs up its own data. However, the SAN client is based on the smaller NetBackup client installation package, so it has fewer administration requirements and uses fewer system resources.
    • It connects to a NetBackup media server over Fibre Channel.
    • The NetBackup SAN Client Fibre Transport Service manages the connectivity and the data transfers for the FT pipe on the SAN clients. The SAN client FT service also discovers FT target mode devices on the NetBackup media servers and notifies the FT Service Manager about them.
    • Requires SAN connectivity with a Media Server running Fibre Transport Services (reference additional information below in regards to the FT Media Server).

    SAN client does not support the following types of backup:
    • SharePoint
    • Enterprise Vault
    • Exchange DAG or CCR backups through a passive node of an Exchange cluster
    • All other application and database agents are supported with the SAN Client.

    Note: SAN client does support the use of FlashBackup but all restores from FlashBackup backups will use the LAN connection, not the SAN connection.
  • SAN client and NetBackup Deduplication
  • • SAN Client is a NetBackup optional feature that provides high speed backups and restores of NetBackup clients. Fibre Transport is the name of the NetBackup high-speed data transport method that is part of the SAN Client feature. The backup and restore traffic occurs over a SAN.
    • SAN clients can be used with the deduplication option; however, the deduplication must occur on the media server, not the client. Configure the media server to be both a deduplication storage server (or load balancing server) and an FT media server. The SAN client backups are then sent over the SAN to the deduplication server/FT media server host. At that media server, the backup stream is deduplicated.
    • Do not enable client deduplication on SAN Clients. The data processing for deduplication is incompatible with the high-speed transport method of Fibre Transport. Client-side deduplication relies on two-way communication over the LAN with the media server. A SAN client streams the data to the FT media server at a high rate over the SAN.
  • FT Media Server
  • A NetBackup FT media server is a NetBackup media server on which the Fibre Transport services are activated. NetBackup FT media servers accept connections from SAN clients and send data to the storage units. The host bus adapters (HBAs) that accept connections from the SAN clients use a special NetBackup target mode driver to process FT traffic. The media server FT service controls data flow, processes SCSI commands, and manages data buffers for the server side of the FT pipe. It also manages the target mode driver for the host bus adaptors.
  
System Requirements for Client Back to top
NetBackup and Backup Exec are not compatible
NetBackup Binary Size
    Approximate binary size of the NetBackup client software for an initial install.
    OS - All Versions CPU Architecture 32-bit client 64-bit client Notes
    Windowsx86-64 494 MBCovers all compatible Windows x64 platforms.
  • * If you install NetBackup in a custom location on a Windows system, some portions of the software are installed on the system drive regardless of the primary application folder location. The space that is required on the system drive generally accounts for 40 to 50 percent of the total binary size that is listed in the above table.
Temporary Disk Space Requirement for Upgrades
    During an upgrade of NetBackup, 500 MBs of temporary disk space is required on the drive where Windows is installed.
Valid Characters in Host Names Requirement
    NetBackup requires host names to comply with RFC-1123, meaning only ASCII characters "a" thru "z", case insensitive, and digits "0" thru "9" and the hyphen character.
  
Bare Metal Restore File System/Volume Manager Support for Client Back to top
  • Listed in the table below are the available File Systems and Logical Volume Managers compatible with Bare Metal Restore 8.0 through 8.0.x. Support is conditional according to the published notes corresponding to the individual OS platforms.

    The table below contains scenarios that have been thoroughly tested with NetBackup. Due to the number of combinations, it is not possible to test all combinations for compatibility. If a particular scenario is not listed, it may work fine, but has not been explicitly tested by Veritas.

    OS File Systems Volume Managers Striping, Mirroring, RAID Notes
    Windows 10 x64 (64-bit)FAT32, NTFSWindows LDMAll 
  • Acronyms
    LDM - Logical Disk Manager
    LVM - Logical Volume Manager
    SFW - Storage Foundation for Windows
    SRT - Shared Resource Tool
    SVM - Solaris Volume Manager
    VxFS - Veritas File System
    VxVM - Veritas Volume Manager
  
Virtual Systems Compatibility for Client Back to top
  • This Statement of Support for NetBackup in a Virtual Environment document describes the extent of support for NetBackup within a virtual environment. Ideally, every NetBackup configuration supported in a traditional physical environment would also be supported in any virtual environment without qualification. While that is our mission, it is not always possible.

    Therefore, the purpose of this document is to:
    • Clarify differences between NetBackup support in physical vs. virtual environments
    • Describe general guidelines for support in virtual environments.
    • Describe impact upon specific NetBackup components: clients, servers, options, etc.
    • Provide references to related information.
VMware Compatibility
  • Virtual Systems Compatibility - Refer: Support for NetBackup in a Virtual Environment - https://www.veritas.com/content/support/en_US/article.100040093
    • For supported vSAN configurations, refer article https://kb.vmware.com/s/article/55071
    • NetBackup supports all minor patch releases (like: EP, U1x) unless otherwise noted.
    • Software Defined Data-Center(SDDC) environments which includes NSX, NSX-T or other networking technologies are transparent to NetBackup and are supported.
    • VMware Cloud on AWS(VMC) support starts from NetBackup 8.1.2
    • Google Cloud VMware Engine (GCVE) is supported on NetBackup 8.1 and later versions
    NetBackup Versions VDDK Versions vSphere Versions vCloud Director Versions Backup/Restore Host Versions
    8.26.7.2vSphere 7.0, 7.0 U1, 7.0 U2, 7.0 U3
    vSphere 6.7, 6.7 U1, 6.7 U2, 6.7 U3
    vSphere 6.5, 6.5 U1, 6.5 U2, 6.5 U3
    vSphere 6.0, 6.0 U1, 6.0 U2, 6.0 U3
    VMware vSAN 6.5, 6.6, 6.6.1, 6.7, 6.7 U1, 6.7 U2, 6.7 U3
    VMware vSAN 7.0, 7.0 U1, 7.0 U2, 7.0 U3

    Refer VMware VDDK release notes URL below for additional information on supported vCenter and ESXi versions.
    Service Provider Versions: 9.0, 9.1, 9.5, 9.7, 10, 10.1
    All 64 bit only:
    Windows Server 2016, 2012 R2, 2012, 2008 R2
    Windows 10
    Red Hat Enterprise Linux (RHEL) 6.8, 6.9, 6.10, 7.2, 7.3, 7.4, 7.5, 7.6
    SUSE Linux Enterprise Server (SLES) 11 SP4 12 SP3, 12 SP4, 15
    CentOS 7.4
  • Note the following:
    • NetBackup Web Client Plugin is not supported with VMware vSphere 7.0 U1,7.0 U2, 7.0 U3 on NetBackup 8.3, 8.3.0.1 and 8.3.0.2
    • NetBackup Web Client Plugin is not supported with VMware vSphere 7.0 and later updates on NetBackup 8.2
    • NetBackup Instant Access is not supported with VMware vSphere 7.0 U1, 7.0 U2, and 7.0 U3 on NetBackup 8.3 and 8.3.0.2
    • The EEB required for Instant Access with VMware vSphere 7.0 U1, 7.0 U2, and 7.0 U3 on 8.3.0.1 can be obtained from Veritas Technical Support. Refer https://www.veritas.com/support/en_US/article.100048721 for additional details.
    • VMware version information can also be obtained from the VMware Product Interoperability Matrix, and is subject to change by VMware. For the latest information, see the following: http://www.vmware.com/resources/compatibility/sim/interop_matrix.php
    • NetBackup supports installation of the backup host in a virtual machine (VMware "hotadd"). The guest operating systems that NetBackup supports for hotadd are the same as the above.
    • For the Linux VMware backup host or restore host, locales other than UTF-8 are not supported.
    • NetBackup 8.0 and later supports VMware Virtual Volumes (VVols)
    • NetBackup 8.1.2 introduces Instant Access for VMware for vCenter and ESXi versions 5.5 and later.
    • NetBackup supports all triple-dot versions of VMware vCloud Director, unless otherwise noted.
    • Install "VMware ESXi 6.0, Patch Release ESXi600-201511001 (2137545)" for consistent backups. This ESX patch is mandatory, according to VMware, to fix the data loss situation reported in VMware KB article 2136854.
    For more information about the cause and the resolution of this issue, see: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2136854
Hyper-V Servers Compatibility
  • Hyper-V is supported on Microsoft Windows Server Editions which are compatible with NetBackup Client. Refer to Operating System Compatibility table for details.
    Hyper-V Servers Compatibility - Reference Article: TECH127089 Statement of Support for NetBackup in a Virtual Environment: http://www.veritas.com/docs/000006177
    Note:
    • NetBackup Client must be installed on the Hyper-V server
    • Master and Media Server platform support as supported by the appropriate NBU release
    NetBackup Versions Hyper-V Server Versions System Center Virtual Machine Manager Versions Comments
    8.0
    8.1
    8.1.1
    8.1.2
    8.2
    8.3
    Hyper-V Server 2019
    Hyper-V Server 2016
    Hyper-V Server 2012 R2
    Hyper-V Server 2008 R2
    Hyper-V Server 2008SP2
    NetBackup Add-In and Hyper-V Intelligent Policy for
    • SCVMM 2012 R2
    • SCVMM 2016
    • SCVMM 2019
    • Hyper-V Intelligent Policy supported only for Hyper-V Server 2012 R2 (and associated updates), Hyper-V Server 2016, Hyper-V Server 2019.
    • VHD and VHDX support
  • File-level recovery from a Hyper-V backup is not supported in case of following scenarios.
     • Any guest OS volume that resides on a 4Kn virtual disk (VHDX file).
     • Files in guest OS that reside on REFS or NTFS deduplicated volume.

    WMI backup features and limitations:
     • WMI method is supported for Windows Server 2016 and above.
     • Requires a VM configuration version later than 5.
     • VMs can be hosted on either the NTFS, ReFS, Windows Storage Spaces, Storage Spaces Direct or SMB 3.0 file shares.
     • WMI backup method does not support backup or restore of user-created checkpoints of the VM.
     • Faster Hyper-V backup and recovery feature requires block-level incremental to be enabled and can only be saved to deduplication storage unit.

    VSS backup limitations:
     • VMs must reside on the NTFS file system (ReFS or NTFS Deduplication is not supported).
     • Block-level incremental backup is not supported.
     • Backing up VM's residing on SMB 3.0 file shares is not supported.

    Hyper-V Limitations
     • Backup of a Hyper-V guest OS that use VHD Sets or shared VHDX file is not supported.
     • Hyper-V Server 2019 and System Center Virtual Machine Manager 2019 is supported from NetBackup version 8.1.2
     • Hyper-V Server on windows Server Semi-Annual Channel builds are supported with partial functionality.
       Refer technote for additional details https://www.veritas.com/docs/100041472
Nutanix AOS versions and backup host
  • Supported Nutanix AOS versions and backup host operating systems
    NetBackup for Nutanix AHV protects Nutanix AHV virtual machines by integrating with Nutanix APIs for Data Protection.
    All minor versions of Nutanix AOS are supported unless specifically noted in the table below.
    NetBackup Versions Nutanix AOS Versions Backup/Restore Host Versions Notes
    8.2, 8.35.10
    5.11
    5.15
    5.17
    5.18, 5.19, 5.20, 6.0, 6.1 , 6.5
    [1][1]
    NetBackup 8.2 and 8.3 supported x86-64 platforms of Red Hat Enterprise Linux and SUSE Linux Enterprise Server will work as backup hosts.
     • Nutanix AOS 5.10 is supported with “BigData” and “Hypervisor” policy type.
     • Nutanix AOS 5.11 and later versions are supported with "Hypervisor” policy type only
     • NetBackup plug-in for Nutanix-AHV is required to enable "Hypervisor” policy on NetBackup 8.2, The Plugin can be downloaded from SORT/Download Centre. The EEB required to enable the support can be obtained from Veritas Technical Support
Footnotes
  • Note the following:
     • Going forward any new AOS versions and new feature sets will be supported with “Hypervisor” policy only. Veritas recommends switching to “Hypervisor” policy for Nutanix AHV protection. Refer: https://www.veritas.com/content/support/en_US/doc/127664414-140673866-0/v127666788-140673866
     • Refer Nutanix Acropolis Hypervisor (AHV) Administrator's Guide for knowing more on Nutanix-AHV VM protection. https://www.veritas.com/content/support/en_US/doc/127664414-140673866-0/v127666788-140673866

    • To backup other hypervisors like VMware ESX or a Hyper-V on a Nutanix Acropolis cluster, please see VMware ESX or a Hyper-V SCL for support matrix. To backup VMware ESX or a Hyper-V on a Nutanix Acropolis cluster, use a VMware policy or a Hyper-V, respectively.
    • NetBackup supports installation of the backup host in a virtual machine.
    • English only AHV is supported.
    • Backups are Crash Consistent.
    • AHV Community Edition is not supported.
    • Nutanix-AHV Plugin can be installed on NetBackup Master, Media or Client to be used as Nutanix Backup Host. Veritas recommends having NetBackup Media server as Backup-Host.
    • Backup of VMs having volume groups is not supported.
    • NetBackup currently does not support file-level recovery. Backup and recovery of the entire virtual machine for all guest operating systems is supported.
Red Hat Virtualization Compatibility
  • Supported RedHat Virtualization (RHV) Versions
    • NetBackup currently supports only x86-64 editions of RHV servers.
    NetBackup Versions RHV Versions
    8.24.2
    4.3
  • Note:
    • Support of Red Hat Virtulization Manager and Hypervisor starts from version 4.2.7
    • NetBackup 8.2 supported x86-64 platforms of Microsoft Windows Server, Red Hat Enterprise Linux and SUSE Linux Enterprise Server will work as backup hosts.
    • Application consistent backup needs RHV Guest Agent.
    • Pass through disk cannot be backed up by RHV agent. Please install NetBackup client inside the VM to protect data on such disks.
    • RHV 4.3.3 has issue in restoring thick provision disk. Till fix is available from RedHat, please restore disk as thin provision.
    • VMs in suspended state cannot be protected.
    • Cinder storage is currently not supported.
    • Backup of VMs based on a template (thin clone) may fail to delete snapshots created by the backup job. If such a condition is encountered, then subsequent backups would fail.
      This issue is related to a race condition in RHV Manager versions 4.2.x, 4.3.0 to 4.3.3. Red Hat recommends upgrading RHV Manager to 4.3.4 before protecting such VMs.
      Refer: https://access.redhat.com/support/policy/updates/rhev
OpenStack Virtualization Compatibility
  • Supported OpenStack Versions
    Distributions which include the following OpenStack versions are supported.
    Supported Hypervisor: KVM
    NetBackup Versions OpenStack Revisions Backup/Restore Host Versions
    8.2Mitaka, Newton, Ocata, Pike, Queens, Rocky, Stein, Train, Ussuri , Victoria[1][1]NetBackup 8.2 supported x86-64 platforms of Red Hat Enterprise Linux and SUSE Linux Enterprise Server will work as backup hosts.
Footnotes
  • 1. EEB for NetBackup 8.2 can be obtained from Veritas technical support
VMware vRealize Compatibility
    Veritas NetBackup plug-in for VMWare vRealize Version VMWare vRealize Orchestrator Versions NetBackup Versions
    1.07.5
    7.6
    NetBackup 8.1.2
    NetBackup 8.2
    NetBackup 8.3
    NetBackup 8.3.0.1
    1.17.5
    7.6
    NetBackup 8.1.2
    NetBackup 8.2
    NetBackup 8.3
    NetBackup 8.3.0.1
    2.08.3
    8.4
    NetBackup 8.2
    NetBackup 8.3
    NetBackup 8.3.0.1
  • Note:
    • NetBackup 8.2 and later versions support Backup Now for VMWare VM, AWS VM and AWS Volumes
    • NetBackup 8.2 and later versions support API Key Authentication in addition to standard Authentication.This is recommended
  
Client Selections for Backup Policies for Client Back to top
  • The information in the Client Selection column of the table below is the client type that should be selected when installing NetBackup as a client on the Operating System/Version and Architecture listed in this table.
  • Where support is shown for "Windows Server 2008" or "Windows Server 2008 R2" it is implied that Standard Edition, Enterprise Edition, Datacenter Edition, and Web Edition are supported.
    Where support is shown for "Windows Server 2012" or "Windows Server 2012 R2" it is implied that Standard Edition, Datacenter Edition, Essentials Edition, and Foundation Edition are supported.
  • NetBackup 8.1.2 and later will require Linux Kernel version 2.6.32 or higher
    OS CPU Architecture NetBackup 8.0 Client Selection
    Windows 10x86-64Windows-x64,Windows
  
Deduplication Supported Operating Systems for Client Back to top
  • Where support is shown for "Windows Server 2008" or "Windows Server 2008 R2" it is implied that Standard Edition, Enterprise Edition, Datacenter Edition, and Web Edition are supported.
    Where support is shown for "Windows Server 2012", or "Windows Server 2012 R2" it is implied that Foundation Edition, Essentials Edition, Standard Edition, and Datacenter Edition are supported.
  • Media Server Deduplication (MSDP) is supported in an Infrastructure as a Service (IaaS) environment on any cloud platform that meets minimum requirements. For additional details on minimum and recommended configurations see NetBackup Media Server Deduplication (MSDP) in the Cloud https://www.veritas.com/support/en_US/article.000004584.
    OS CPU Architecture Client Deduplication Minimum NetBackup Level
    Windows 10x86-64Yes8.0
  
Database and Application Agent Compatibility for Client Back to top
  • This Software Compatibility List (SCL) document describes the supported database and application agents for Veritas NetBackup 8.0 through 8.x
  • Database and application patch support: Major versions of database software have been qualified in Veritas Labs and are listed in the tables below. NetBackup supports minor versions, service packs, and patches of database software unless otherwise noted, with the exception of Microsoft Exchange, Microsoft SharePoint and Microsoft SQL Server.
  • Linux support: For Linux distributions shown in the tables below, NetBackup is supported on all "editions" and on all vendor GA updates (n.1, n.2, etc.) or service packs (SP1, SP2, etc.) unless otherwise noted in this document or in the NetBackup OS Compatibility List, http://www.veritas.com/docs/100032808
  • Database Appliances: 3rd party database hardware appliances are supported if the appliance OS/architecture and database software are listed in the Veritas NetBackup OS compatibility list http://www.veritas.com/docs/100032808 and in the Database and Application Agent compatibility list (this document). For example, some Oracle Exadata and Exalogic models are supported based upon this support statement. Please consult the vendor documentation to identify the embedded software versions.
  • End of life information: More information is available about certain NetBackup features, functionality, 3rd-party product integration, Veritas product integration, applications, databases, and OS platforms that Veritas intends to replace with newer and improved functionality, or in some cases, discontinue without replacement. Please see the SORT widget titled "NetBackup Future Platform and Feature Plans" at https://sort.veritas.com/netbackup.
Database Agents
  • The sections below contain information that is related to specific database agents and OS platforms.
  • SAP
    The NetBackup SAP Agent protects SAP Oracle environments by integrating with SAP BR*Tools. SAP BR*Tools may have a separate version from the SAP Kernel. Reference Technical Solution 51094 for details http://www.veritas.com/docs/000033132.
    SAP environments based on Microsoft SQL or DB2 databases are supported via the NetBackup Microsoft SQL and DB2 agents respectively.
    SAP supports Oracle and MAX-DB base environments.
  • Windows Server 2008
    When using a 32-bit OS on a x64 CPU the DB Agent is supported if the x86 CPU is listed in this compatibility list.
    Contents (for details click on the checkbox)
    MariaDBMySQLPostgreSQL
    SQLite
  
Snapshot Client - General Information for Client Back to top
  • This section contains Snapshot Client compatibility information for Veritas NetBackup 8.2 - 8.x.x. It covers NetBackup Server (which includes Enterprise Server and Server), Client, and Snapshot Client.
  • Veritas supports standard unaltered kernel/Operating System levels. Should an issue arise on a revised kernel, Operating System, or virtual system environment, Veritas support may request the recreation of the problem with the standard operating environment distribution.
  • Veritas InfoScale / Storage Foundation Compatibility
  • Veritas InfoScale/Storage Foundation file system and volume manager are supported as the Snapshot Client stack based on Operating System requirements of the InfoScale/Storage Foundation product. For specific OS compatibility information regarding InfoScale/Storage Foundation, please see "Veritas Services and Operations Readiness Tools (SORT)".
  • FlashBackup policy limitation: The NetBackup FlashBackup policy is not supported on Veritas File System (VxFS) layout versions 8 and beyond, versions 7 and earlier are supported.
  • Third-Party Products
  • When a problem may be related to product(s) from a third-party vendor with whom Veritas has a cooperative or collaborative relationship on such product(s), then Veritas will work with that vendor in an attempt to resolve the problem, but resolution is not guaranteed. When Veritas does not have such a support relationship in place with the third-party vendor, or when the vendor ceases to support such product(s), then our ability to support Veritas Licensed Software operating with such vendor's product(s) may be limited, affected, or prevented (and such third party product(s) may cease to be part of Veritas-supported configuration(s)). Veritas support may be limited by the hardware or software vendor due to their support lifecycle. Should a vendor announce End of Support for a product, Veritas support may be limited.
  • Oracle Agent Support
  • Oracle ASM Environment is not supported.
Snapshot Client - Considerations
    Subject Notes
    Support assumptionsFor details on supported operating systems, please refer to the "NetBackup 8.0 - 8.x.x Operating System Software Compatibility List" .

    1. Where support is shown for "Windows Server 2008 Enterprise Edition" it also means that the other editions of Windows Server 2008 and Windows Server 2008 R2 are supported. Only the x64 (64-bit) editions of the OS are supported as a NetBackup Media Server. Server Core Installation Option is not supported as a NetBackup Media Server.
    2. Where support is shown for "Windows Server 2012 Datacenter" it also means that the other editions of Windows Server 2012, Windows Storage Server 2012, Windows Server 2012 R2, and Windows Storage Server 2012 R2 are supported.
    3. Where support is shown for "Windows Server 2016 Datacenter" it also means that the other editions of Windows Server 2016 and Windows Storage Server 2016 are supported.
    4. Where support is shown for "Windows Server 2019 Datacenter" it also means that the other editions of Windows Server 2019 are supported.
    Operating system support dropped 1. CentOS 6 is not supported as a media server with NetBackup 9.0 and later.
    2. Red Hat Enterprise Linux 6 is not supported as a media server with NetBackup 9.0 and later.
    3. Solaris (all versions) on SPARC and x86-64 will not be supported as a media server with NetBackup 10.0 and later.
    4. SUSE Linux Enterprise Server 11 is not supported as a media server with NetBackup 8.3 and later.
    5. SUSE Linux Enterprise Server 12 GA through SP2 are not supported as a media server with NetBackup 8.3 and later.
    6. Windows 2008 and 2008 R2 are not supported by Microsoft as of January 14, 2020.
  
Snapshot Client - VSS Snapshot Providers Support for Microsoft Windows Considerations for Client Back to top
    Subject Notes
    Support assumptions- Array vendor tables have been removed from this section as Veritas NetBackup has an open support policy for Microsoft Volume Shadow Copy Service (VSS) snapshots.

    - Support is implied if an array vendor supplies and actively supports a VSS provider, or when using a Veritas InfoScale/Storage Foundation VxVM provider, or when using the Microsoft Default System provider.

    - Support includes Local, Alternate Client, FlashBackup-Windows Local, and FlashBackup-Windows Alternate Client snapshot methods.

    - Support extends to NetBackup application agents, Windows virtual machines using VMware RDM disks or Hyper-V Pass-Thru disks, and NetBackup for Hyper-V backups of VM snapshots.

    - Snapshot roll back (Snapshot Client Instant Recovery) is not supported, use the copy back method instead.

    - Consult with your array vendor on VSS provider availability.
  
Encryption and Security Solutions for Client Back to top
  • NetBackup Client Encryption is compatible with all disk storage units (DSU), tape drives, tape libraries, and virtual tape libraries supported by NetBackup.
  • Note: Any DSU type supported by NetBackup can be used with client encryption, although encryption prevents deduplication by Media Server Dedupe, OpenStorage devices, or VTLs.
  • NetBackup Client Encryption is supported on all NetBackup client platforms except OpenVMS, and is not supported with BMR or SAN client.
Symantec Security Information Manager
  • NetBackup Client is supported with Symantec Security Information Manager (SSIM) v4.8 and later.
  
File System Compatibility for Client Back to top
  • NetBackup supports backing up file data on all POSIX compliant file systems. The table below represents the platform configurations that have been tested for compatibility with ACLs and other extended attributes. Unless otherwise noted in the table below, ACLs and other extended attributes are not supported.

    NetBackup has improved its integration with the Veritas File System (VxFS) product to ensure interoperability on all compatible VxFS versions. If you run a VxFS version that is older than VxFS 4.0 then you need to install new VxFS libraries on the client to back up the systems that run VxFS. You can search and download the appropriate VxFS libraries to your system from Patch Central on the Veritas Support Web site. See, https://sort.veritas.com/patch/finder

    Note :
    • For Linux Operating Systems, the backup and restore of extended attributes set by the chattr command on XFS, ZFS, BTRFS etc. is not supported
    • Cross platform restore of extended attributes is not supported.
    File System ACL Other Extended Attributes or Named Data Streams Notes / Exceptions
    NTFSYesYesRegarding the Microsoft Windows Server data deduplication feature:
    - Optimized Backup occurs for NTFS deduplication volumes when possible. Per Microsoft design, any restore from Optimized Backup is non-optimized. This means, after restore, files are in non-optimized form until the next optimization is run by the OS schedule. Be sure adequate space is available for restore.
    - By design, TIR is not supported on NTFS deduplication volumes.
    - FlashBackup is not supported with NTFS deduplication volumes.
  
NetBackup OpsCenter Web Browser Requirements Back to top
    Web Browser Versions Notes
    Microsoft Internet Explorer- 7.x, 8.x, 9.0, 10.0, 11.0
    - 32-bit and 64-bit
    - IE 7.0 and later versions may display a security certificate warning page when you access OpsCenter. Reference "Disabling security certificate warnings permanently from browsers" instructions in the NetBackup OpsCenter Administrator's Guide.
    - It may not be possible to view reports, jobs, or audit data when exporting from IE 9.0. Alternatively, IE 9.0 may show a "Internet Explorer Cannot Download" error when exporting reports, jobs, or auditing data from OpsCenter.
    - Reference "Exporting OpsCenter reports or data with IE 9.0" instructions in the NetBackup OpsCenter Administrator's Guide.
    - Extra steps are required to access the OpsCenter console using Internet Explorer version 7 or 8 on a 32-bit Windows computer. For more information, see "About web browser considerations" in the NetBackup OpsCenter Administrator's Guide.
    - NetBackup 7.7.2 and later support OpsCenter with IE 11
    - The NetBackup OpsCenter Administrator's Guide and other Guides are available by selecting the appropriate NetBackup version link at http://www.veritas.com/docs/000003214
    Mozilla Firefox- 3.0, 3.5.x, 3.6.x, 9.0.1 and above for OpsCenter 7.0 to 7.5.
    - 15.0 and later versions for OpsCenter 7.6 and later.
    - 32-bit and 64-bit
    - 27.0 and later versions for OpsCenter 8.0 and later
    - Mozilla Firefox may display an Untrusted Connection page when you access OpsCenter. Reference "Disabling the Untrusted Connection page in Mozilla Firefox" instructions in the Veritas OpsCenter Administrator's Guide.
  
NetBackup OpsCenter Backup Product Support Back to top
  • There are two OpsCenter products: Veritas NetBackup OpsCenter and Veritas NetBackup OpsCenter Analytics.

    OpsCenter does not require any license and is included with the NetBackup Enterprise Server and Server products. OpsCenter provides single deployment configuration and user interface for monitoring, alerting, and reporting functionality. It provides monitoring, management and administration capabilities for NetBackup as well as operational reporting for other products as designated in the following table.

    OpsCenter Analytics is the licensed version of OpsCenter. In addition to the features available in the unlicensed OpsCenter version, Analytics offers report customization, chargeback reporting and support for third-party data protection products as designated in the following table. The primary objectives of this product are to help organizations assess their compliance with business standards, e.g., service level agreements, and assist in effective business planning, e.g., future backup requirements via backup trend analysis.

    Listed in the table below are the backup and archiving products and versions supported by OpsCenter and OpsCenter Analytics.
    Backup Product Version Support Level Analytics License Required
    Veritas NetBackup7.7 and higher versionsAll supported NetBackup platforms by Remote Agent.
    Native OpsCenter agent for Windows 2008 (SP2 and R2) and Solaris 10 and 11.
    BCS customer are entitled to receive support for the legacy products until 2019. Refer to https://www.veritas.com/support/en_US/business-critical-services/support-extensions-program.html
    No
    Veritas NetBackup ApplianceSee NetBackup Hardware Compatibility List for Appliance support information.
    http://www.veritas.com/docs/000025228
    Data collection happens automatically by NBSLNo
    Veritas NetBackup PureDisk6.2, 6.2.2, 6.5, 6.5.1, 6.5.1.2, 6.6, 6.6.0.1, 6.6.0.2, 6.6.0.3, 6.6.1, 6.6.1.2, 6.6.3a, 6.6.5PureDisk supported platform (PDOS) by the OpsCenter integrated Agent. You do not need a separate Agent to collect data from PureDisk. You can use the inbuilt Agent of the OpsCenter Server for data collection.
    To create or configure the data collector, select the Agent that is installed as Integrated Agent.
    No
  
NetBackup OpsCenter Operating System Requirements Back to top

NetBackup OpsCenter Binary Size
    Approximate binary sizes for NetBackup OpsCenter Agent, Server, and ViewBuilder software.
    OS - All Versions CPU Architecture Agent Server ViewBuilder
    Windows Serverx86-64261MB742MB234MB
NetBackup OpsCenter Physical Memory Requirement
    OS/Version CPU Architecture Minimum Memory Requirement
    Windows 10x86-648 GB
Valid Characters in Host Names Requirement
    NetBackup OpsCenter requires host names to comply with RFC-1123, meaning only ASCII characters "a" thru "z", case insensitive, and digits "0" thru "9" and the hyphen character.
  
NetBackup Administration Consoles Back to top
  • The NetBackup Java Administration Console is an interface to configure and manage NetBackup installed on the same machine. The interface can run on any NetBackup Java-capable system.

    The Backup Archive and Restore (BAR) console is an interface to the NetBackup client. The Backup, Archive, and Restore utility performs backups and archives for the system on which it is installed and restores for this system and other clients.

    For information on how to install the consoles mentioned above reference the NetBackup Installation Guides. And for information on usage reference the NetBackup Administrator's Guides.

    The table below is a list of the platforms that support the NetBackup-Java Administration Console and the Backup Archive and Restore Interface.
    Note: If a supported NetBackup client is not listed in the table below the client is supported for backup and restore, but it does not support any of the available graphical interfaces.
  • Where support is shown for "Windows Server 2008" or "Windows Server 2008 R2", it is implied that Standard Edition, Enterprise Edition, Datacenter Edition, and Web Edition are supported.
  • Where support is shown for "Windows Server 2012" or "Windows Server 2016" it is implied that Standard Edition, Datacenter Edition, Essentials Edition, and Foundation Edition are supported.
  • Where support is shown for "Windows Server 2019" it is implied that Standard Edition, Datacenter Edition, Essentials Edition are supported.
  • Administrative consoles for supported versions of NetBackup are included in the NetBackup installation packages.
    Starting at version 8.1, console versions are installed for all versions of NetBackup that are not beyond their End of Support Life (EOSL).
    For information on supported versions of NetBackup see https://sort.veritas.com/eosl.
    OS CPU Architecture NetBackup-Java Administration Console Backup, Archive, and Restore Interface
    Windows 10x64YY
  
NetBackup in the Cloud Back to top
Core NetBackup Deployments in the Cloud
  • NetBackup supports cloud-based Primary Servers and Media Servers as part of extending data protection into workloads in the cloud. For more information, see the "360 Data Management" page.
Core NetBackup Deployments in the Cloud - Considerations
Core NetBackup Deployments in the Cloud - Links to Solution Information
  • NetBackup is supported on any cloud infrastructure environment that meets NetBackup's minimum resource requirements. Solution briefs have been created for the cloud infrastructures listed in the table below.
Core NetBackup Deployments in the Cloud - Deployment Templates
    Contents (for details click on the checkbox)
    AmazonMicrosoft
NetBackup CloudPoint In-Cloud Data Protection
  • NetBackup CloudPoint In-Cloud Data Protection is available in NetBackup 8.3 and later.
NetBackup CloudPoint In-Cloud Data Protection - System Requirements
NetBackup CloudPoint In-Cloud Data Protection - Supported File Systems
  • NetBackup CloudPoint In-Cloud Data Protection is supported with the following operating systems and file systems:
NetBackup CloudPoint In-Cloud Data Protection - File system support
    Operating System Supported File Systems
    Linuxext3, ext4, xfs[1]
    WindowsNTFS
Footnotes
  • 1. ext2 snapshots are not application-consistent due to underlying OS limitations.
NetBackup CloudPoint In-Cloud Data Protection - High Level Feature Support
  • NetBackup CloudPoint In-Cloud Data Protection high level feature support information is listed in the tables below, organized by vendor.
    Contents (for details click on the checkbox)
    NetBackup CloudPoint In-Cloud Data Protection High Level Feature Support - Amazon Web ServicesNetBackup CloudPoint In-Cloud Data Protection High Level Feature Support - Google Cloud PlatformNetBackup CloudPoint In-Cloud Data Protection High Level Feature Support - Microsoft Azure
NetBackup CloudPoint In-Cloud Data Protection - Restore Options from Snapshots
  • NetBackup CloudPoint In-Cloud Data Protection support for snapshot restore options is listed in the tables below, organized by vendor.
    Contents (for details click on the checkbox)
    NetBackup CloudPoint In-Cloud Data Protection Restore Options - Amazon Web ServicesNetBackup CloudPoint In-Cloud Data Protection Restore Options - Google Cloud PlatformNetBackup CloudPoint In-Cloud Data Protection Restore Options - Microsoft Azure
NetBackup CloudPoint In-Cloud Data Protection Replication Support Across Regions
  • NetBackup CloudPoint In-Cloud Data Protection support for replication across regions is listed in the tables below, organized by cloud vendor.
    Contents (for details click on the checkbox)
    NetBackup CloudPoint In-Cloud Data Protection Replication Support - Amazon Web Services
NetBackup CloudPoint In-Cloud Data Protection Replication Support Across Accounts
  • NetBackup CloudPoint In-Cloud Data Protection support for replication across accounts is listed in the tables below, organized by vendor.
    Contents (for details click on the checkbox)
    NetBackup CloudPoint In-Cloud Data Protection Replication Support - Amazon Web Services
NetBackup CloudPoint In-Cloud Data Protection Restore Options for Snapshots Replicated Across Regions
  • NetBackup CloudPoint In-Cloud Data Protection support for restore options for snapshots replicated across regions is listed in the tables below, organized by vendor.
    Contents (for details click on the checkbox)
    NetBackup CloudPoint In-Cloud Data Protection Replicated Snapshot Restore Support - Amazon Web Services
NetBackup CloudPoint In-Cloud Data Protection Restore Options for Snapshots Replicated Across Accounts
  • NetBackup CloudPoint In-Cloud Data Protection support for restore options for snapshots replicated across accounts is listed in the tables below, organized by vendor.
    Contents (for details click on the checkbox)
    NetBackup CloudPoint In-Cloud Data Protection Replicated Snapshot Restore Support - Amazon Web Services
NetBackup CloudPoint In-Cloud Data Protection Supported Regions
  • Region support for cloud providers is listed in the tables below, organized by provider.
NetBackup CloudPoint In-Cloud Data Protection - Supported Regions
    Cloud Provider Supported Regions
    Amazon Web ServicesAfrica (Cape Town), Asia Pacific (Hong Kong), Asia Pacific (Mumbai), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), Asia Pacific (Tokyo), AWS GovCloud (US-East), AWS GovCloud (US-West), Canada (Central), China (Beijing), China (Ningxia), Europe (Frankfurt), Europe (Ireland), Europe (London), Europe (Milan), Europe (Paris), Middle East (Bahrain), South America (Sao Paulo), US East (N. Virginia), US East (Ohio), US West (N. California), US West (Oregon)
    Google Cloud PlatformAsia-East1 (zones a, b, c), Asia-East2 (zones a, b, c), Asia-Northeast1 (zones a, b, c), Asia-Northeast2 (zones a, b, c), Asia-South1 (zones a, b, c), Asia-Southeast1 (zones a, b, c), Australia-Southeast1 (zones a, b, c), Europe-North1 (zones a, b, c), Europe-West1 (zones b, c, d), Europe-West2 (zones a, b, c), Europe-West3 (zones a, b, c), Europe-West4 (zones a, b, c), Europe-West6 (zones a, b, c), NorthAmerica-Northeast1 (zones a, b, c), SouthAmerica-East1 (zones a, b, c), US-Central1 (zones a, b, c, f), US-East1 (zones b, c, d), US-East4 (zones a, b, c), US-West1 (zones a, b, c), US-West2 (zones a, b, c), US-West3 (zones a, b, c), US-West4 (zones a,b,c)
    Microsoft AzureAll regions
NetBackup CloudPoint In-Cloud Data Protection - Database Applications
  • NetBackup CloudPoint In-Cloud Data Protection support for database applications is listed in the tables below, organized by vendor.
    Contents (for details click on the checkbox)
    MongoDBMicrosoft SQLOracle
  
NetBackup Snapshot Manager Back to top
  • Starting with NetBackup 8.3, you can add CloudPoint servers from the NetBackup web UI. You can manage CloudPoint and control discovery of assets from the NetBackup webUI, REST API, and CLI without interacting with the CloudPoint interfaces.
  • You can upgrade to NetBackup Snapshot Manager from CloudPoint 2.x and later. If you are using a standalone CloudPoint server and want to use it along with NetBackup, you can migrate your CloudPoint server. For more information, see the Veritas NetBackup CloudPoint Install and Upgrade Guide.
NetBackup Snapshot Manager / CloudPoint - Considerations
    Subject Notes
    Vendor support considerations1. All storage configurations shown in the tables below were tested with drivers and firmware supported by the storage array vendors. Check with these vendors for minimum driver and firmware levels, specific driver and firmware support, support for the stated Veritas products, and other functional options.
    2. Veritas supports hardware products listed below that include virtualization capability, but Veritas does not support compatibility issues that can be attributed to the virtualization feature. Veritas requires any compatibility issue to be reproduced in a non-virtualization environment. If the issue is confirmed to be related to Veritas products, Veritas will support its software at the same level as when that software is not running with hardware virtualization products. Veritas will cooperate with virtualization vendors, and attempt to assist in the diagnosis of problems found between the virtualization and Veritas products.
    3. Minor ("double-dot") versions of the software listed in the tables below are also supported. (Example: "v5.0" means versions v5.0.1, v5.0.2, etc. are also supported.)
NetBackup Snapshot Manager / CloudPoint - Vendor Compatibility
    Contents (for details click on the checkbox)
    Dell EMCHewlett Packard EnterpriseHitachi Vantara
    HuaweiInfinidatNetApp
    NutanixPure Storage
  
Support for Workloads with Image Sharing in Cloud Back to top
  • Image Sharing in Cloud is supported with either MSDP Direct Cloud Tiering or CloudCatalyst. Workload support is listed in the tables below.
Support for Image Sharing using MSDP Direct Cloud Tiering
  • Image sharing using MSDP Direct Cloud Tiering is supported with any of the S3 cloud providers listed in the Vendor Compatibility tables below, and with Microsoft Azure Blob storage.
  • MSDP Direct Cloud Tiering is supported with NetBackup 8.3 and later.
Support for Image Sharing using CloudCatalyst
  • Image sharing using CloudCatalyst is supported with any of the S3 cloud providers listed in the Vendor Compatibility tables below, and with Microsoft Azure Blob storage.
Image Sharing in Cloud - Supported Workloads
    Workload NetBackup Start of Support Notes
    Basic backups of files and folders8.2 
    Bare Metal Restore (BMR)Not supportedDuplication of images is supported. Restores can be done from another NetBackup media server.
    DB28.2 
    Enterprise Vault8.2 
    Hadoop8.2 
    Hbase8.2 
    Hyper-V8.2 
    Informix8.2 
    Lotus Notes8.2 
    MariaDB8.2 
    Microsoft Exchange Server8.2 
    Microsoft SharePoint8.2 
    Microsoft SQL Server8.2 
    MySQL8.2 
    NDMP8.2 
    NutanixNot supportedDuplication of images is supported. Restores can be done from another NetBackup media server.
    OpenStackNot supportedDuplication of images is supported. Restores can be done from another NetBackup media server.
    Oracle8.2 
    Postgres8.2 
    RHV8.2 
    SAPNot supportedDuplication of images is supported. Restores can be done from another NetBackup media server.
    Sybase8.2 
    VMware8.2 
  
NetBackup Future Platform and Feature Plans Back to top
  • Veritas is committed to providing the best possible data protection experience for NetBackup customers on the widest variety of platforms, operating systems, databases, applications, and hardware. Veritas is continuously reviewing NetBackup's support of these items to ensure the proper balance of supporting their General Availability release, the very latest versions of new software, hardware and introducing new features and functionality and maintaining support for existing and older versions of these products and NetBackup functionality. While Veritas is continually adding support for new features, platforms, operating systems, and applications, it may be also necessary to improve, replace, or remove support in NetBackup for lesser used, older features, functionality, software, OS, databases, applications, integration with other products, and hardware that are no longer supported or nearing their end of support life from the manufacturer from NetBackup Compatibility Lists.

    To better help its customers to plan for these upcoming changes to the support status of these items in NetBackup, Veritas will provide advanced notification as soon as possible as listed below. Veritas intends to list the older product functionality, features, hardware, OS, and 3rd party software products that will no longer be supported in the next release of NetBackup. If possible, these items are listed at least six months before that release.

    The information below lists certain features, functionality, 3rd-party and Veritas products, applications, databases, and OS/Platforms for which Veritas intends to replace with newer and improved functionality, or in some cases, discontinue without replacement. The last release of NetBackup to proliferate support of the item is provided. Technotes in the Notes column contain additional details about available replacement options. Where a major, minor or release update version is specified, the feature or platform is supported through the last Maintenance Update (patch) of that release. Where 'All' is specified, it is supported for all versions or variations of the family of the relevant or supported platforms.

    Check this site frequently for updated information for NetBackup. If an item listed below will cause significant business impacts, contact your Veritas Sales Account Team. Please note that the official NetBackup Support Lifecycle for your existing NetBackup product version won't be affected or altered in any way. For the official Veritas Support Lifecycle Policy of all NetBackup versions, see https://www.veritas.com/content/support/en_US/terms/support-fundamentals.html.

    Information in the following table contains plans starting with NetBackup 7.5. For information concerning no longer supported platforms, consult the following section of the report.

    Information in the following table was last updated on 2023-10-23.
    Date Added/Modified Feature/Functionality/OS/Platform NetBackup Area OS/Platform OS/Platform Version CPU Architecture Last Supported Release Notes
    2022-04-19AllOpsCenterAllAllAll10.0.0.1 
    2021-06-03VMware Cloud Director 9.0, 9.1, 9.5AllAllAllAll9.0.0.1VMware Cloud Director 9.0, 9.1, 9.5 to be not supported from NetBackup 9.1 onwards.
  
End of Life (EOL) announcement and platforms no longer supported by NetBackup Back to top
  • The following Operating System and Application Versions/Architectures in the 8.x.x versions of NetBackup will be End of Life.
    Platform and Application Versions CPU Architecture OS Bits NetBackup Last NetBackup Release Supported
    Red Hat Enterprise Linux (RHEL) 6.8, 6.9 and 6.10ALL64Master, Media and Client8.3
    SUSE Linux Enterprise Server 11ALL64Master, Media and Client8.2
    SUSE Linux Enterprise Server 12 SP2 or olderALL64Master, Media and Client8.2
    Windows 7ALL64Client8.2
    Windows VistaALL64Client8.2
    Windows Server 2008 and 2008 R2ALL64Master, Media and Client8.2
    Red Hat Enterprise Linux and SUSE Linux Enterprise Serverz/Architecture64Media Server8.2
    VMware vSphere 5.5x86-6464VMware Agent8.1.2
    Hewlett Packard Enterprise HP-UX (All Versions)IA6464Master and Media Server8.1.1
    IBM AIX (All Versions)POWER64Master and Media Server8.1.1
    Red Hat Enterprise Linux (RHEL) 6.7 or olderx86-6464Master, Media and Client8.1.1
    CentOS 6.7 or olderx86-6464Media and Client8.1.1
    Oracle Linux 6.7 or olderx86-6464Media and Client8.1.1
  
Documentation Back to top