Error Code details
V-5-1-5321
Severity: Error 
Component: Volume Manager 
Message:
vxnetd threads are not running on secondary host %s.
Description:

The message appears when you try to start or resume the replication on the Primary, while the required vxnetd daemon does not run on the Secondary.

 

Veritas solutions
Solution 1 Vote: [Useful] [Not useful]
Last Modified: 2012-06-29 01:29:11 PDT
Platform: Generic
Release: Generic
Content:
  1. Check if the vxnetd daemon uses the same port on all the hosts.

    The vxnetd daemon runs as a kernel thread. And it should listen on the configured port, which is 4145 by default. Run command vrport on all the hosts and check whether they use the same vxnetd port.

    For example, the following output shows that the vxnetd port is 4145 as the heartbeat indicates. And every host in the replication setup should report the same port.

    # vrport
    heartbeat=4145
    vradmind=8199
    vxrsyncd=8989
    data=Anonymous-Ports
  1. Verify that vxnetd is running on the system.

    Check if the vxnetd daemon listens on the port. Enter:

    # netstat –an | grep port

    If vxnetd daemon is not running, start it. Enter:

    # /etc/init.d/vxnm-vxnetd start

For more information, see www.symantec.com/docs/TECH75455.

 

User solutions
No user solutions yet.

 

Read and accept Terms of Service