OS: Solaris Sparc
OS Version: 5.8, 5.9, 5.10
Fixes Applied for Products:
	VRTSvcs - Veritas Cluster Server by Symantec

Additional Instructions:
Please read the instructions below before installing the patch.

 PATCH VRTSvcs 5.0MP3 HF5 for Veritas Cluster Server 5.0MP3
===============================================================

 Patch Date:  07 October, 2009

This README provides information on:
 * BEFORE GETTING STARTED
 * CRC AND BYTE COUNT
 * FIXES AND ENHANCEMENTS INCLUDED IN THE PATCH
 * PACKAGES AFFECTED BY THE PATCH
 * INSTALLING THE PATCH
 * UNINSTALLING THE PATCH


BEFORE GETTING STARTED:
----------------------
This patch only applies to:
	VRTSvcs running on Solaris Sparc 5.8, 5.9 or 5.10

Ensure that you are running the supported configurations before
installing this patch.


FIXES AND ENHANCEMENTS INCLUDED IN THE PATCH: 
--------------------------------------------
Etrack Incidents: 1709464, 1819540

SDR's of Fixed Symantec Incidents:
--------------------------------
Symantec Incident : 1819540
Symptom:
	SMTP notification email should contain Entity name in subject line.
	This is an enhancement requested by a customer.
Defect Description:
	The email from notifier says the following in Subject 
	"Subject: VCS Warning, CPU Usage exceeded the threshold on the system".
	It doesn't contain the Entity name and Entity type in the notification. 
Resolution:
	The notification email has been modified to include 
	the Entity type and Entity name as per the customer request.

SDR of Previous Hot-Fix(s):
--------------------------
e1709464:Typo in hastart script. LANG and LC_ALL do not get unset if 
         they are not present in the environment or empty string(""). 


PACKAGES AFFECTED BY THE PATCH:
-------------------------------
This patch updates the following VCS package(s) 
	VRTSvcs from 5.0MP3 or higher to 5.0MP3 HF5


INSTALLING THE PATCH:
--------------------
The following steps should be run on the nodes in the VCS cluster,
where the patch is going to be installed:

Stopping VCS on the cluster node:
--------------------------------
To stop the cluster on all nodes follow the given steps:
1. Ensure that "/opt/VRTS/bin" directory is included in your PATH
   environment variable so you can execute all the VCS commands. Refer
   to "Veritas Cluster Server Installation Guide" for more information.

2. Verify that the version of VRTSvcs is 5.0MP3 or later for Solaris Sparc.

3. Freeze all the service groups persistently:
	# haconf -makerw
	# hagrp -freeze [group] -persistent
	# haconf -dump -makero

3. From any one node, execute the following command to stop the cluster:
	# hastop -all -force

4. Verify that the cluster is stopped on all nodes by running 
   the hasys command:
	# hasys -state

5. On all nodes, make sure that both had and hashadow processes 
   are stopped.

6. Stop the VCS CmdServer on all nodes:
	# CmdServer -stop


Installing the Patch:
--------------------
1. Un-compress the downloaded patch from Symantec.
   Change directory to the unzipped patch location. 
   Install the VRTSvcs 5.0MP3HF5 patch using the following command:
	# patchadd 141268-04

2. Verify that the new patch has been installed:
	# showrev -p | grep 141268-04
   You will find the following output on display with the patch 
   installed properly:

   Patch: 141268-04  Obsoletes:  Requires: Incompatibles: Packages: VRTSvcs


Re-starting VCS on the cluster node:
-----------------------------------
At this time, you can start cluster services on the cluster nodes.
1. On one node, please verify that VCS configuration is valid.
	# hacf -verify /etc/VRTSvcs/conf/config/

2. If the configuration is valid, start VCS:
	# hastart
   On all other nodes, start VCS by issuing hastart(1m) once the first node 
   goes to LOCAL_BUILD or RUNNING state.

3. Unfreeze all the groups:
	# haconf -makerw
	# hagrp -unfreeze [group] -persistent
	# haconf -dump -makero


UNINSTALLING THE PATCH:
-----------------------
Steps to remove the Patch from a cluster node:
---------------------------------------------
1. Follow the steps provided under "Stopping VCS on the cluster node" 
   section above, to stop VCS on the node & unload any drivers, as required.

2. Remove the patch by the following command:
	# patchrm 141268-04

3. Verify that the patch has been removed from the system:
	# showrev -p | grep 141268-04

   There shall be no result on the output.

4. Restart the node following the steps under 
   "Re-starting VCS on the cluster node" section above.