OpForce5.0MP1+Eh1849665

 Basic information
Release type: Hot Fix
Release date: 2009-09-25
OS update support: None
Technote: None
Documentation: None
Popularity: 526 viewed    downloaded
Download size: 13.81 MB
Checksum: 718220577

 Applies to one or more of the following products:
Provisioning Manager 5.0 MP1 On Solaris 10 SPARC

 Obsolete patches, incompatibilities, superseded patches, or other requirements:
None.

 Fixes the following incidents:
1849665

 Patch ID:
None.

Readme file
Patch ID: OpForce5.0MP1+Eh1849665
Release Date: 25th September 2009
Synopsis: Support for Intel 82575EB NIC and Adaptec 5805 RAID controller
Apply to Release: 5.0 MP1 
Affected Architecture(s): SPARC
Etract ID(s): 1849665
Also Includes: N/A
Conflicting Patches: None
Other Required Patches: None

Keywords: Intel 82575EB, igb drivers, 2.6.18 Kernel, aacraid drivers


Rollback possible: Yes

Rollback Procedure: 
./setup.sh uninstall

If you have already applied this patch once already, use the backed up
default-2.6.18.krn-Pre-Opforce5.0MP1+1849665,
upgrade-i686-Linux-2.6.18.tgz-Pre-Opforce5.0MP1+1849665,
default-autoeth-131072-2.6.18.gz-Pre-Opforce5.0MP1+1849665,
default-autoeth-65536-2.6.18.gz-Pre-Opforce5.0MP1+1849665,
elemental.jar-Pre-Opforce5.0MP1+1849665

instead of the newly created backups(listed above).


Description: 

  This patch addresses the following issues:
	Support for Intel 82575EB NIC and Adaptec 5805 RAID controller
   
  This patch 
	Adds new files 
		default-2.6.18.krn  
		default-autoeth-65536-2.6.18.gz  
		upgrade-i686-Linux-2.6.18.tgz
        Modifies files
		/opt/veritas/opforce/tomcat/shared/lib/elemental.jar


Patch Installation Instructions:  

To apply this patch on a Linux or Solaris OpForce server:


  If you have already applied this patch once already, use the backed up
default-2.6.18.krn-Pre-Opforce5.0MP1+1849665,
upgrade-i686-Linux-2.6.18.tgz-Pre-Opforce5.0MP1+1849665,
default-autoeth-131072-2.6.18.gz-Pre-Opforce5.0MP1+1849665,
default-autoeth-65536-2.6.18.gz-Pre-Opforce5.0MP1+1849665,
elemental.jar-Pre-Opforce5.0MP1+1849665
  present on your system and use them to rollback the patch, if needed.


  1. Create a patch directory, and extract:
       OpForce5.0MP1+Eh1849665.tar
  2. Change directory to the patch directory.
  3. Run ./setup.sh
  4. After installing this patch new AOS named .OpBoot(TM) Standard X86 (2.6.18 kernel) 256MB. is available in VPM UI.	
  5. Select new ActiveOS for Target
  6. Reboot targets in Admin State with new ActiveOS
  

Importatnt: 
Targets machines using AOS 揙pBoot(TM) Standard X86 (2.6.18 kernel) 256MB� should be removed or AOS should be changed before uninstalling this patch. 
If not then the target machine has to be removed from list of computing devices and rediscovered again.