To display the log map length and alignment
# vxprint [ -g diskgroup ] -lv volume
For example, to print information for the volume vol1 in disk group dg1:
# vxprint -g dg1 -lv vol1
logging: type=REGION loglen=0 serial=0/0 mapalign=0 maplen=0 (disabled)
This indicates a log map alignment (logmap_align) value of 0, and a log map length (logmap_len) value of 0.
If the log map is set and enabled, the command and results may be in the following form:
# vxprint -lv drlvol Disk group: dgTestSol Volume: drlvol info: len=20480 type: usetype=fsgen state: state=ACTIVE kernel=ENABLED cdsrecovery=0/0 (clean) assoc: plexes=drlvol-01,drlvol-02,drlvol-03 policies: read=SELECT (round-robin) exceptions=GEN_DET_SPARSE flags: closed writecopy writeback logging: type=REGION loglen=528 serial=0/0 mapalign=16 maplen=512 (enabled) apprecov: seqno=0/0 recovery: mode=default recov_id=0 device: minor=46000 bdev=212/46000 cdev=212/46000 path=/dev/vx/dsk/dgTestSol/drlvol perms: user=root group=root mode=0600 guid: {d968de3e-1dd1-11b2-8fc1-080020d223e5}