|
|
|
|
|
The following command lists attributes of all HBA controllers on the system:
CTLR-NAME ENCLR-TYPE STATE ENCLR-NAME
===============================================================
This output shows that the controller scsi1 is connected to disks that are not in any recognized DMP category as the enclosure type is OTHER.
The other controllers are connected to disks that are in recognized DMP categories.
All the controllers are in the ENABLED state which indicates that they are available for I/O operations.
The state DISABLED is used to indicate that controllers are unavailable for I/O operations. The unavailability can be due to a hardware failure or due to I/O operations being disabled on that controller by using the vxdmpadm disable command.
This form of the command lists controllers belonging to a specified enclosure and enclosure type:
# vxdmpadm listctlr enclosure=enc0 type=ACME
CTLR-NAME ENCLR-TYPE STATE ENCLR-NAME
===============================================================