Home > Veritas Storage Foundation™ Volume Manager Manual Pages

VXATTACHD (1M)

Maintenance Commands

NAME
SYNOPSIS
DESCRIPTION
NAME
vxattachd - site monitoring daemon

SYNOPSIS
/etc/vx/bin/vxattachd [mail_address...]

DESCRIPTION
The vxattachd daemon monitors Veritas Volume Manager (VxVM) for disks being attached, and reattaches a detached site if the disks that belong to that site become accessible.
vxattachd analyzes the output of the vxnotify command, and waits for a failed disk to attach. When a disk is attached, vxattachd attempts to online the disk, and tries to reattach the failed site. If a site is successfully reattached, vxattachd starts recovery using vxrecover, and sends mail to root (by default) or to other specified users.
Mail Notification
By default, vxattachd sends mail to root with information about the disk status of any attempts to reattach the site. To send mail to other users, add the user login name to the line that starts vxattachd in the startup script, /etc/init.d/vxvm-recover, and reboot the system. For example, if the line appears as:
```
vxattachd root &
```
and you want mail also to be sent to user1 and user2, change the line to read:
```
vxattachd root user1 user2 &
```
Alternatively, kill the vxsite process, and restart it from the command line with the required mail addresses as arguments.
The mail notification has a format that is similar to the following:
```
Subject : Volume Manager site reattach on host 
```
hostname Reattached site sitename in disk-group diskgroup
Reattachment Procedure
If a disk from a detached site becomes accessible again, vxattachd checks whether the relocation daemon, vxrelocd, is running. If vxrelocd is running, vxattachd attempts to reattach the site. The relocation daemon can then try to relocate the failed subdisks using space on the available disks in the disk group. If the failed objects are successfully relocated, vxrelocd changes the state of the site to RECOVER, and starts the recovery of volumes at the site. When all the plexes at a site have been recovered, the plexes are put into the ACTIVE state, and the state of the site is set to ACTIVE.
If vxrelocd is not running, vxattachd only reattaches a site when all the disks from that site become accessible. After successfully reattaching a site, vxattachd changes the site state to ACTIVE, and initiates recovery using vxrecover. When all the plexes from a site have been recovered, the plexes are put into the ACTIVE state, and the state of the site is set to ACTIVE.
vxattachd does not attempt to reattach a site that has been explicitly detached by an administrator. The state OFFLINE is set for sites that have been detached by using the following command:
```
vxdg -g 
```
dg_name
```
 detachsite 
```
sitename
Disabling vxattachd
If you do not want a site to be recovered automatically, kill the vxattachd daemon, and prevent it from restarting. To kill the daemon, run the following command from the command line, and locate the process table entry for vxattachd:
```
ps -ef
```
Execute the command:
```
kill -9 
```
PID
Substitute the process ID of the vxattachd process for PID. To prevent vxattachd from being restarted, comment out the line that starts vxattachd in the startup script /etc/init.d/vxvm-recover.

FILES

/etc/init.d/vxvm-recover

The startup file for vxattachd.

SEE ALSO
kill(1), mailx(1), ps(1), vxdg(1M), vxrelocd(1M), vxintro(1M), vxnotify(1M), vxrecover(1M)
Last updated: 18 Oct 2006
Copyright ©2009 Symantec Corporation
All rights reserved.

VXATTACHD (1M)

Table of contents