Modifying log levels for VRTSweb
Customize the log levels for VRTSweb.
To modify log levels from the command line
-
On the system where VRTSweb is installed, run the following command from the VRTSweb install directory:
webgui log [server=
level] [webapps=
level] [other=
level
]
You can specify any of the following values for the variable level for each Web server component: FINE|FINER|FINEST|CONFIG|INFO|WARNING|SEVERE.
Set the level to a lower value to generate more logs. FINEST is the lowest level while SEVERE is the highest level.
For example:
webgui log server=FINEST webapps=INFO Other=ERROR
webgui log server=INFO
To modify log levels from rom the Web console
-
Access the Web server on a configured port. For example, http://hostname:8181/
-
Click the Configuration tab.
-
Click Configure Logging on the left side of the Configuration page.
-
In the Configure Logging dialog box:
Click the thumbnail above to view full-sized image.
-
Select the logging levels for the Web server, Web applications, and for other components.
-
Enter the name and password for a user having superuser privileges on the Web server system.
-
Click OK.