Configuring the fire drill service group
Prev	Setting up campus clusters	Next

---

Configuring the fire drill service group

Perform the following steps to configure the fire drill service group.

To configure the fire drill service group

1. Configure a fire drill service group similar to the application service group with the following exceptions:
   • The AutoFailOver attribute must be set to 0.
   • Network-related resources must not be configured.
   • The diskgroup names for the DiskGroup and the Mount resources in the fire drill service group must be appended with "_fd".

     For example, if the value of the DiskGroup attribute in the application service group is ccdg, then the corresponding value in the fire drill service group must be ccdg_fd.

     If the value of the BlockDevice attribute for the Mount resource in the application service group is /dev/vx/dsk/ccdg/ccvol, then the corresponding value in the fire drill service group must be /dev/vx/dsk/ccdg_fd/ccvol.

2. Add a resource of type DiskGroupSnap. Define the TargetResName and the FDSiteName attributes for the DiskGroupSnap resource.

   See Veritas Cluster Server Bundled Agent Reference Guide for attribute descriptions.

3. Create a dependency such that the DiskGroup resource depends on the DiskGroupSnap resource.
4. Create a group dependency such that the fire drill service group has an offline local dependency on the application service group.