Home > Veritas Storage Foundation™ Volume Manager Manual Pages
VXDMPINQ (1M) |
|
Maintenance Commands |
Table of contents
vxdmpinq - display SCSI inquiry data
/etc/vx/diag.d/vxdmpinq
[-cdh]
[-e evpd_value]
[-p page_code]
device_name
The vxdmpinq utility returns SCSI inquiry data for
the specified raw disk device
specified by its full pathname
(for example,
/dev/rdsk/c0t0d0s2 or /dev/vx/vdmp/c0t0d0s2).
The returned vendor and product identification values
can be used with the vxdiskadm and vxdmpadm
commands.
-
-c
-
Summarizes inquiry data as a colon-separated list on a single line.
-
-d
-
Returns detailed inquiry data.
-
-e evpd_value
-
Specifies the value of the enable vital product data (EVPD) bit
to be used with the SCSI inquiry command
(possible values are 0 or 1, default value is 0).
-
-h
-
Prints a help message on the usage of the command.
-
-p page_code
-
Specifies the page code to be used with the SCSI inquiry command (default
value is 0). The page code field specifies which page of vial product data
should be returned if evpd_value is set to 1.
The value of page_code must be set to 0 if the value of evpd_value
is set to 0.
vxdiskadm(1M),
vxdmpadm(1M)
Last updated: 31 Aug 2008
Copyright ©2009 Symantec Corporation
All rights reserved.