You can configure the virtual IP of the cluster to use to connect to the Cluster Manager (Java Console) or to specify in the RemoteGroup resource.
See the Veritas Cluster Server Administrator's Guide for information on the Cluster Manager.
See the Veritas Cluster Server Bundled Agents Reference Guide for information on the RemoteGroup agent.
To configure the virtual IP of the cluster
Review the required information to configure the virtual IP of the cluster.
Confirm whether you want to use the discovered public NIC on the first system.
Active NIC devices discovered on galaxy: bge0 Enter the NIC for Virtual IP of the Cluster to use on galaxy: [b,q,?](bge0)
Confirm whether you want to use the same public NIC on all nodes.
Is bge0 to be the public NIC used by all systems [y,n,q,b,?] (y)
Enter the virtual IP address for the cluster.
Enter the Virtual IP address for the Cluster: [b,q,?] 192.168.1.16
Confirm the default netmask or enter another one:
Enter the netmask for IP 192.168.1.16: [b,q,?] (255.255.240.0)
Verify and confirm the Cluster Virtual IP information.
Cluster Virtual IP verification: NIC: bge0 IP: 192.168.1.16 Netmask: 255.255.240.0
Is this information correct? [y,n,q] (y)