vxdiskadd - add one or more disks for use with Veritas Volume Manager
The vxdiskadd utility configures disks for use by Veritas Volume Manager (VxVM). vxdiskadd prompts the user for a disk group name and disk name for the disks. If no disk group name specified, the disks will be left as unassigned replacement disks for future use. A new disk group may be created that will become the disks disk group. If a disk group is specified for the disks, the user is prompted for whether the disks should be designated as spares for the disk group. For new disks, all space on the disk becomes free space in the disks disk group. vxdiskadd interactively allows initialization to be done for all the disks specified or allows the user to ask to make the decision for each disk individually.
One or more disks may be specified with a disk_address_pattern_list. The basic form of a disk address is enclosurename_# or hdisk#. Controller addresses are typically of the form scsi# for SCSI controllers or fscsi# for Fibre Channel controllers. This address may be specified to indicate that all disks on that controller should be used. For example scsi2 may be used to specify all disks on SCSI controller 2. A disk address of the form enclosurename_ indicates that all disks in the specified enclosure are to be used. For example, enc1_ specifies all disks in the enclosure named enc1. More than one disk address or address pattern may be specified on the command line. The word all may be used to specify all disks on the system. Disk address names relate directly to device node names in the /dev/vx/dmp and /dev/vx/rdmp directories. Here are more examples:
all: all disks scsi3: all disks on controller hdisk12: a single disk xyz_0 : a single disk xyz_ : all disks on the enclosure whose name is xyz
The files /etc/vx/cntrls.exclude, /etc/vx/disks.exclude and /etc/vx/enclr.exclude may be used to exclude controllers or disks from use by vxdiskadd. Each line of cntrls.exclude specifies the address of a controller to exclude, for example, scsi2. Each line of disks.exclude specifies a disk to exclude, for example, hdisk12. Each line of enclr.exclude specifies the name of an enclosure to exclude, for example, enc0.
All courses of action that do not involve clear failure conditions require prompts from the user, with defaults supplied as appropriate. Help is made available at every prompt. Entering ? in response to a prompt displays a context-sensitive help message.
Reconnecting a drive that was temporarily inaccessible This situation is detected automatically by noting that the specified drive has a disk ID that matches a disk media record with no currently associated physical disk. After reconnection, any stale plexes referring the disk are reattached, and any stopped volumes referring the disk are restarted. This reattach action is performed by calling the vxrecover utility. Initialization of a disk with reserved regions Initialization of the disk is performed by calling vxdisksetup. Adding a disk to an existing disk group This operation can be performed independently of the initialization of the disk drive. The operation adds the disk to the group so that its storage is added to the free space pool in that disk group. The vxassist utility can subsequently allocate from that free space. Creation of new disk groups in which to import a new disk If disks are added that are required to be put into a disk group that does not exist, the option of creating the disk group is offered.
Some environments provide guidelines to optimize VxVMs interaction with intelligent storage systems. If these guidelines are present, VxVM follows the guidelines when adding disks to disk groups. If the operation fails due to these guideline(s), you are prompted to use the force option. The force option ignores any such storage-specific guidelines.
/etc/vx/cntrls.exclude Specifies the address of controllers to exclude from vxdiskadd operations. /etc/vx/disks.exclude Specifies the address of disks to exclude from vxdiskadd operations. /etc/vx/enclr.exclude Specifies the address of enclosures to exclude from vxdiskadd operations.
EFI disks cannot be added to a disk group that is compatible with the Cross-platform Data Sharing (CDS) feature, nor can they be formatted as CDS disks.
vxassist(1M), vxdisk(1M), vxdiskadm(1M), vxdisksetup(1M), vxintro(1M), vxrecover(1M)
|VxVM 4.0||vxdiskadd (1M)|