Renaming an enclosure

The vxdmpadm setattr command can be used to assign a meaningful name to an existing enclosure, for example:

# vxdmpadm setattr enclosure enc0 name=GRP1

This example changes the name of an enclosure from enc0 to GRP1.

Note:

The maximum length of the enclosure name prefix is 23 characters.

The following command shows the changed name:

# vxdmpadm listenclosure all

ENCLR_NAME    ENCLR_TYPE    ENCLR_SNO                STATUS
============================================================
other0        OTHER        OTHER_DISKS               CONNECTED
jbod0         X1           X1_DISKS                  CONNECTED
GRP1          ACME         60020f20000001a90000      CONNECTED