Displaying information about array ports

Use the commands in this section to display information about array ports. The information displayed for an array port includes the name of its enclosure, and its ID and worldwide name (WWN) identifier.

To display the attributes of an array port that is accessible via a path, DMP node or HBA controller, use one of the following commands:

# vxdmpadm getportids path=path-name
# vxdmpadm getportids dmpnodename=dmpnode-name
# vxdmpadm getportids ctlr=ctlr-name

The following form of the command displays information about all of the array ports within the specified enclosure:

# vxdmpadm getportids enclosure=enclr-name

The following example shows information about the array port that is accessible via DMP node sdg:

# vxdmpadm getportids dmpnodename=sdg

NAME       ENCLR-NAME  ARRAY-PORT-ID pWWN
==============================================================
sdg        HDS9500V0   1A            20:00:00:E0:8B:06:5F:19