Listing the targets configured from a Host Bus Adapter or a port


Listing the targets configured from a Host Bus Adapter or a port
Prev	How to administer the Device Discovery Layer	Next

You can obtain information about all the targets configured from a Host Bus Adapter or a port. This includes the following information:

Alias	The alias name, if available.
HBA-ID	Parent HBA or port.
State	Whether the device is Online or Offline.
Address	The hardware address.

To list the targets

To list all of the targets, use the following command:

# vxddladm list targets

The following is a sample output:

TgtID       Alias HBA-ID State  Address
-----------------------------------------------------------------
c2_p0_t0    -     c2     Online 50:0A:09:80:85:84:9D:84
c3_p0_t1    -     c3     Online iqn.1992-08.com.netapp:sn.84190939

To list the targets configured from a Host Bus Adapter or port

You can filter based on a HBA or port, using the following command:

# vxddladm list targets [hba=hba_name|port=port_name]

For example, to obtain the targets configured from the specified HBA:

# vxddladm list targets hba=c2

TgtID      Alias HBA-ID State   Address
--------------------------------------------------------------
c2_p0_t0   -     c2     Online  50:0A:09:80:85:84:9D:84

Prev	Up	Next
Listing the ports configured on a Host Bus Adapter	Home	Listing the devices configured from a Host Bus Adapter and target