The broadcast address is set explicitly for each link in the following example.
Display the content of the /etc/llttab file on the first node galaxy:
galaxy # cat /etc/llttab
set-node galaxy set-cluster 1 link link1 /dev/udp - udp 50000 - 192.168.9.1 192.168.9.255 link link2 /dev/udp - udp 50001 - 192.168.10.1 192.168.10.255
Verify the subnet mask using the ifconfig command to ensure that the two links are on separate subnets.
Display the content of the /etc/llttab file on the second node nebula:
nebula # cat /etc/llttab
set-node nebula set-cluster 1 link link1 /dev/udp - udp 50000 - 192.168.9.2 192.168.9.255 link link2 /dev/udp - udp 50001 - 192.168.10.2 192.168.10.255
Verify the subnet mask using the ifconfig command to ensure that the two links are on separate subnets.