To verify the upgrade using the NIM ADM utility

1. Verify that the alternate boot environment is active:

   # lspv | grep rootvg
   hdisk0         0009710fa9c79877    old_rootvg  
   hdisk1         0009710f0b90db93    rootvg									active

   If there are multiple boot disks for rootvg, run the following command to verify the disk the system has booted from:

   # bootlist -m normal -o
   hdisk1 blv=hd5 pathid=0

2. Verify that the version of the upgraded filesets on the alternate boot disk is 6.2.0.0.

   # lslpp -l | grep -i vrts

   Note:

   The VRTSsfcpi61 fileset still exists on the alternate boot disk. You need to manually uninstall the fileset.

   If you upgraded the operating system:

   # oslevel -s