To add a new datastore with disk disk_0 and disk_1

• Add a new datastore with disk disk_0 and disk_1:

  # svsdatastore add disk_0 disk_1

To add a new datastore with disk disk_0 and disk_1 with a size of 10G

• Add a new datastore with disk disk_0 and disk_1 with a size of 10G:

  # svsdatastore add -s 10g disk_0 disk_1

To add a new datastore with disk disk_0 and disk_1 with a size of 10G on the mount point

• Add a new datastore with disk disk_0 and disk_1 with a size of 10G on the mount point:

  # svsdatastore add -s 10g -m /mntpt disk_0 disk_1

To delete the datastore associated with mount point

• Delete the datastore associated with mount point:

  # svsdatastore delete -m /mntpt

To resize the datastore associated with mount point to the size of 15G

• Resize the datastore associated with mount point to the size of 15G:

  # svsdatastore resize -m /mntpt -s 15g

To add a virtual IP "10.192.111.222" with the netmask "255.255.240.0" on network interface "NIC"

• Add a virtual IP "10.192.111.222" with the netmask "255.255.240.0" on network interface "NIC":

  # svsdatastore addvip -i 10.192.111.222 -n 255.255.240.0 -e eth0

To remove Virtual IP "10.192.111.222" from the configuration

• Remove Virtual IP "10.192.111.222" from the configuration:

  # svsdatastore deletevip -i 10.192.111.222

To display the datastore configuration

• Display the datastore configuration:

  # svsdatastore display
  CNFS metadata filesystem : /locks
  
  # MOUNTPOINT          SIZE    SHARE OPTIONS
  /defragvol            250G    rw,no_root_squash
  
  # Virtual IP          STATE
  10.209.87.147         ONLINE on swlx65