 | ||
| Specify the RVG-specific parameters | ||
|---|---|---|
| Prev | Specifying the parameters for analysis | Next |
Complete the RVG Specific Parameters page, and then click .
For each RVG, select the tab and specify the following parameters:
indicates the bandwidth throttling for that RVG. The default is 0 (zero), which indicates that no bandwidth limit applies.
indicates the maximum expected outage times specific to that RVG, for example, the time during which the Secondary host for the RVG is unavailable. Enter the outage duration in days, hours, or minutes. The default is one hour.
indicates that the same bandwidth limit and outage duration apply to all RVGs. Select this check box to enable the All tab and disable the RVG-specific tabs.