If you configured SFHA on the CP server cluster, perform the following procedure to set up shared storage for the CP server database.
The installer can set up shared storage for the CP server database when you configure CP server for the SFHA cluster.
Veritas recommends that you create a mirrored volume for the CP server database and that you use the VxFS file system type.
To set up shared storage for the CP server database
For example:
# vxdg init cps_dg disk1 disk2
For example:
# vxassist -g cps_dg make cps_vol volume_size layout=mirror
The CP server configuration utility only supports vxfs file system type. If you use an alternate file system, then you must configure CP server manually.
Depending on the operating system that your CP server runs, enter the following command: