Dynamic Multi-Pathing (DMP) can display the attributes of the enclosures, including the enclosure type, enclosure serial number, status, array type, number of LUNs, and the firmware version, if available.
To display the attributes of a specified enclosure, use the following DMP command:
# vxdmpadm listenclosure emc0 ENCLR_NAME ENCLR_TYPE ENCLR_SNO STATUS ARRAY_TYPE LUN_COUNT FIRMWARE ================================================================================== emc0 EMC 000292601383 CONNECTED A/A 30 5875
To display the attrtibutes for all enclosures in a system, use the following DMP command:
# vxdmpadm listenclosure all
ENCLR_NAME ENCLR_TYPE ENCLR_SNO STATUS ARRAY_TYPE LUN_COUNT FIRMWARE ==================================================================================== Disk Disk DISKS CONNECTED Disk 6 - emc0 EMC 000292601383 CONNECTED A/A 1 5875 hitachi_usp-vm0 Hitachi_USP-VM 25847 CONNECTED A/A 1 6008 emc_clariion0 EMC_CLARiiON CK20007040035 CONNECTED CLR-A/PF 2 0324