The vxdmpadm setattr command can be used to assign a meaningful name to an existing enclosure, for example:
# vxdmpadm setattr enclosure emc0 name=GRP1
This example changes the name of an enclosure from emc0 to GRP1.
The following command shows the changed name:
# vxdmpadm listenclosure all
ENCLR_NAME ENCLR_TYPE ENCLR_SNO STATUS ARRAY_TYPE LUN_COUNT FIRMWARE ==================================================================================== Disk Disk DISKS CONNECTED Disk 6 - GRP1 EMC 000292601383 CONNECTED A/A 1 5875 hitachi_usp-vm0 Hitachi_USP-VM 25847 CONNECTED A/A 1 6008 emc_clariion0 EMC_CLARiiON CK20007040035 CONNECTED CLR-A/PF 2 0324