Table: Remote cluster attributes lists the RemoteCluster attributes. These attributes apply to remote clusters.
Table: Remote cluster attributes
Remote cluster Attributes |
Definition |
---|---|
AdministratorGroups (system use only) |
List of operating system user account groups that have administrative privileges on the cluster. This attribute applies to clusters running in secure mode.
|
Administrators (system use only) |
Contains list of users with Administrator privileges.
|
CID (system use only) |
The CID of the remote cluster. |
ClusState (system use only) |
Indicates the current state of the remote cluster as perceived by the local cluster.
|
ClusterAddress (user-defined) |
Specifies the remote cluster's virtual IP address, which is used to connect to the remote cluster by the local cluster.
|
ClusterName (system use only) |
The name of cluster.
|
ClusterUUID (system use only) |
Unique ID assigned to the cluster by Availability Manager.
|
ConnectTimeout (user-defined) |
Specifies the time in milliseconds for establishing the WAC to WAC connection.
|
DeclaredState (user-defined) |
Specifies the declared state of the remote cluster after its cluster state is transitioned to FAULTED. See Disaster declaration.
The value can be set to one of the following values:
|
EngineVersion (system use only) |
Specifies the major, minor, maintenance-patch, and point-patch version of VCS. The value of EngineVersion attribute is in hexa-decimal format. To retrieve version information: Major Version: EngineVersion >> 24 & 0xff Minor Version: EngineVersion >> 16 & 0xff Maint Patch: EngineVersion >> 8 & 0xff Point Patch: EngineVersion & 0xff
|
Guests (system use only) |
List of operating system user accounts that have Guest privileges on the cluster. This attribute is valid for clusters running in secure mode.
|
OperatorGroups (system use only) |
List of operating system user groups that have Operator privileges on the cluster. This attribute is valid for clusters running in secure mode.
|
Operators (system use only) |
List of users with Cluster Operator privileges.
|
RemoteConnectInterval (user-defined) |
Specifies the time in seconds between two successive attempts to connect to the remote cluster.
|
SocketTimeout (user-defined) |
Specifies the time in seconds for WAC to WAC heartbeat. If no IAA is received in the specified time, connection with the remote WAC is assumed to be broken.
|
SourceFile (system use only) |
File from which the configuration is read. Do not configure this attribute in main.cf. Make sure the path exists on all nodes before running a command that configures this attribute.
|
VCSFeatures (system use only) |
Indicates which VCS features are enabled. Possible values are: 0 - No features are enabled (VCS Simulator) 1 - L3+ is enabled 2 - Global Cluster Option is enabled Even though the VCSFeatures is an integer attribute, when you query the value with the haclus -value command or the haclus -display command, it displays as the string L10N for value 1 and DR for value 2.
|
VCSMode (system use only) |
Denotes the mode for which VCS is licensed. Even though the VCSMode is an integer attribute, when you query the value with the haclus -value command or the haclus -display command, it displays as the string UNKNOWN_MODE for value 0 and VCS for value 7.
|
WACPort (system use only) |
The TCP port on which the wac (Wide-Area Connector) process on the remote cluster listens for connection from other clusters.
|
More Information