|
hasim -start system_name
|
Starts VCS Simulator. The variable system_name represents the system that will transition from the LOCAL_BUILD state to the RUNNING state.
|
|
hasim -setupclus clustername -simport port_no [-wacport port_no] [-sys systemname]
|
Creates a simulated cluster and associates the specified ports with the cluster.
|
|
hasim -deleteclus <clus>
|
Deletes the specified cluster. Deleting the cluster removes all files and directories associated with the cluster.
Before deleting a cluster, make sure the cluster is not configured as a global cluster.
|
|
hasim -start clustername_sys1 [-clus clustername] [-disablel10n]
|
Starts VCS Simulator on the cluster specified by clustername.
If you start VCS Simulator with the -disablel10n option, the simulated cluster does not accept localized values for attributes. Use this option when simulating a UNIX configuration on a Windows system to prevent potential corruption when importing the simulated configuration to a UNIX cluster.
|
|
hasim -stop
|
Stops the simulation process.
|
|
hasim -poweroff system_name
|
Gracefully shuts down the system.
|
|
hasim -up system_name
|
Brings the system up.
|
|
hasim -fault system_name
resource_name
|
Faults the specified resource on the specified system.
|
|
hasim -faultcluster clustername
|
Simulates a cluster fault.
|
|
hasim -clearcluster clustername
|
Clears a simulated cluster fault.
|
|
hasim -getsimconfig cluster_name
|
Retrieves information about VCS Simulator ports.
|
|
hasim -hb [..]
|
Equivalent to standard hahb command.
|
|
hasim -disablel10n
|
Disables localized inputs for attribute values. Use this option when simulating UNIX configurations on Windows systems.
|
|
hasim -clus [...]
|
Equivalent to standard haclus command.
|
|
hasim -sys [...]
|
Equivalent to standard hasys command.
|
|
hasim -grp [...]
|
Equivalent to standard hagrp command.
|
|
hasim -res [...]
|
Equivalent to standard hares command.
|
|
hasim -type [...]
|
Equivalent to standard hatype command.
|
|
hasim -conf [...]
|
Equivalent to standard haconf command.
|
|
hasim -attr [...]
|
Equivalent to standard haattr command.
|
