The following is a sample of LLT over UDP in the etc/llttab file.
set-node sys1 set-cluster clus1 link eth1 udp - udp 50000 - 192.168.10.1 - link eth2 udp - udp 50001 - 192.168.11.1 - link-lowpri eth0 udp - udp 50004 - 10.200.58.205 - set-addr 1 eth1 192.168.10.2 set-addr 1 eth2 192.168.11.2 set-addr 1 eth0 10.200.58.206 set-bcasthb 0 set-arp 0