Verifying I/O fencing configuration
Prev Setting up disk-based I/O fencing manually Next

Verifying I/O fencing configuration

Verify from the vxfenadm output that the SCSI-3 disk policy reflects the configuration in the /etc/vxfenmode file.

To verify I/O fencing configuration

  1. On one of the nodes, type:
    # vxfenadm -d

    Output similar to the following appears if the fencing mode is SCSI3 and the SCSI3 disk policy is dmp:

    I/O Fencing Cluster Information:
================================

Fencing Protocol Version: 201
Fencing Mode: SCSI3
Fencing SCSI3 Disk Policy: dmp
Cluster Members:

   * 0 (sys1)
   1 (sys2)

RFSM State Information:
   node 0 in state 8 (running)
   node 1 in state 8 (running)

  2. Verify that the disk-based I/O fencing is using the specified disks.

    # vxfenconfig -l
Prev Up Next
Modifying VCS configuration to use I/O fencing Home Setting up server-based I/O fencing manually