To view path status

1. Make sure that the path you want to view the status for is displayed in the DMP DSMs tab in the right pane of the VEA console.

   If the DMP DSMs tab is not displayed, select a disk that uses that path in the tree view under the Disks folder. Then, in the right pane, click the DMP DSMs tab for the disk.

2. Select the path in the DMP DSMs tab.

   Select Properties from the path context menu that comes up.

   The Path Properties screen appears.

   The screen displays the following information for the selected path:

   Name	The name of the selected path.
   Status	DMP DSMs have two path state indicators: Healthy - The path is operational. Unhealthy - The path is not operational.
   Primary	Whether the path is primary or not.
   Port Number	The number of the physical port on the storage array that the selected path is connected to.
   Channel	The channel that is associated with the path.
   Target ID	The number that, when combined with the LUN, uniquely identifies a disk on the port.
   LUN	Logical Unit Number, the number that, when combined with the Target ID, uniquely identifies a disk on the port.
   Load Balancing Policy	Current load balance policy in effect.

3. Click OK to close the screen.