dsminfo
|
Displays the information about the DSM.
|
arrayinfo
|
Displays the information about an array.
|
deviceinfo
|
Displays the information about a device (that is, a hard disk in an array).
|
pathinfo
|
Provides the information about a path.
|
arrayperf
|
Displays the performance statistics about an array.
|
deviceperf
|
Displays the performance statistics about a device.
|
pathperf
|
Displays the performance statistics about the paths that are connected to a device.
|
allperf
|
Displays the performance statistics for all paths for all devices.
|
iostat
|
Displays the I/O statistics for a single disk, all disks in an array, or all the disks of all the arrays in the host.
|
cleardeviceperf
|
Resets the performance I/O statistics of a device.
|
cleararrayperf
|
Resets the performance I/O statistics of an array that contains the specified disk.
|
clearallperf
|
Resets the performance I/O statistics of all arrays under the control of the DMP DSMs that the specified disk belongs to.
|
setdsmscsi3
|
Enables or disables SCSI3 support for the DMP DSMs that control the specified disk. On Windows Server operating systems, can enable or disable SCSI3 support for Veritas DSMs that are installed but with storage not yet connected.
|
setarrayscsi3
|
Enables or disables SCSI3 support in the registry of the array that contains the specified disk.
|
setattr dsm
|
Sets DSM attributes.
|
setattr array
|
Sets the array attributes.
|
setattr device
|
Sets the device attributes.
|
setattr path
|
Sets the path attributes.
|
set isislog
|
Alters the trace level of the VEA/ISIS log dynamically. |
rescan
|
Rescans all the storage system objects on the computer. |
disk list
|
Lists the details of all the disks on the managed server. |
getdsmattrib
|
Displays the information for installed Veritas DSMs with no storage connection. |
getmpioparam
|
Displays MPIO parameters for installed Veritas DSMs
|
setmpioparam
|
Sets MPIO parameters for installed Veritas DSMs |