Sample configuration
Prev Deploying Replicated Data Clusters: New application installation Next

Sample configuration

The sample setup has four servers, two for the primary zone and two for the secondary zone. The nodes will form two separate clusters, one at the primary zone and one at the secondary zone.

The procedures in this section are illustrated by a sample deployment and use the following names to describe the objects created and used during the installation and configuration. These names apply to the FileShare application. If you work with a different application, your names will be different.

Zone

Object Name

Description

Primary zone

SYSTEM1 & SYSTEM2

First and second nodes of the primary zone

FS

File Share server name

FS_SG

File Share service group

FS_SG_DG

Disk group names

FS_REPLOG

Replicator log volume required by Volume Replicator

Secondary zone

Note:

All the other parameters are the same as on the primary zone.

SYSTEM3 & SYSTEM4

First and second nodes of the secondary zone

RDS and Volume Replicator Components

FS_RVG

RVG name for File Share server

Prev Up Next
IPv6 support Home Configuring the storage hardware and network