Add or initialize one or more disks
|
|
Prompts for one or more disk device addresses, and a disk group
to which these are to be added.
|
|
When initializing disks into a new disk group, you are prompted to choose
whether this disk group should be compatible with the
Cross-platform Data Sharing (CDS) feature.
|
|
You are also given the alternative of
initializing the disk but leaving it unallocated to a disk group.
A default disk name is assigned with the format,
diskgroup##, such that
the names are unique within all imported disk groups.
You are prompted to specify whether to designate the disks as spares
for the disk group.
|
Remove a disk
|
|
Prompts for a disk, by disk media name.
The disk is checked
to ensure that no subdisks reside on the disk.
If the disk is in use,
the operation fails with a recommendation to first move all
volumes off the disk.
If this disk is the last disk in a group,
you are also prompted whether to remove the disk group
from the system.
|
|
The operation then calls vxdg rmdisk to remove the
disk from its disk group.
If this is the last disk in its disk group,
vxdg deport is used instead.
|
Remove a disk for replacement
|
|
Prompts for a disk by disk media name.
The disk is checked
for volumes that would lose all mirrors as a result of the operation.
If such volumes exist, those volumes are listed and
you are prompted whether to continue the operation.
|
|
The operation calls vxdg -k rmdisk to dissociate
the media record from the physical disk.
If there are formatted disks available that have
disk headers but no disk group,
you are prompted whether to use one of these disks as a
replacement.
|
Replace a failed or removed disk
|
|
Prompts for a disk media name.
The named media record must be dissociated from a disk.
If the media record is not in the
removed state,
unused disks are scanned for matching disk IDs.
If a disk with a matching disk ID is found,
you are prompted whether to reattach that disk.
|
|
If a matching disk is not used,
you are prompted for a new disk,
by device address.
If the named replacement disk has a valid disk header,
but is not allocated to a disk group,
you are prompted
whether to reinitialize the disk.
If the named replacement
disk is listed as allocated to a disk group or to another host,
you are prompted whether to continue the operation.
|
|
If the device is initialized, vxdisksetup is called to
set up public and private regions
and to create the disk header.
|
|
Given an initialized disk,
the operation replaces the
disk in a disk group with vxdg -k adddisk.
|
Mirror volumes on a disk
|
|
Prompts for a disk, by media name.
It then prompts
for a destination disk within the same disk group, also by media
name.
Specifying no destination disks indicates that any disk can be
the destination.
The operation calls vxmirror to mirror the volumes.
|
Move volumes from a disk
|
|
Prompts for a disk, by media name.
It then prompts
for a possible list of destination disks, also by disk media name.
Specifying no destination disks indicates that any disk is suitable.
The operation calls vxevac to move subdisks
off the disk.
|
Enable access to (import) a disk group
|
|
Prompts for a disk group name.
The operation calls vxdg import to import the disk group stored
on that disk.
|
Remove access to (deport) a disk group
|
|
Prompts for a disk group name.
The prompt
lists alternate disk groups and the disks
(media name and access name)
that they contain.
The operation calls vxdg
deport.
|
Enable (online) a disk device
|
|
Prompts for a disk device.
The prompt
lets you display the disks on the system.
The operation
functions only for disks currently offline.
It then makes the disk accessible.
|
Disable (offline) a disk device
|
|
Prompts for a disk device.
The prompt
lets you display the disks on the system.
The operation
functions only for disks currently online, but not part of
any disk group.
It then marks the disk as offline such that VxVM no
longer tries to access the disk.
|
Mark a disk as a spare for a disk group
|
|
Sets up a disk as a spare device for its disk group.
A spare disk can be used to automatically replace a
disk that has failed.
No space can be used on a disk that is marked as a spare.
|
Turn off the spare flag for a disk
|
|
Removes a disk from the list of spare disks,
and returns its space to the general pool of available space.
|
Unrelocate subdisks back to a disk
|
|
Moves subdisks which were hot-relocated following a disk failure
back to the original disk, or to a disk with a different name,
possibly with a different offset.
|
Exclude a disk from hot-relocation use
|
|
Sets up a disk to be excluded from use by hot-relocation.
The disk is marked as nohotuse and it cannot be used by
hot-relocation to replace a disk that has failed.
However, it remains available to be used as free space
for its disk group.
|
Make a disk available for hot-relocation use
|
|
Turns off the nohotuse flag on a disk.
Use this option to make a disk available
for hot-relocation use. This only applies to disks that were
previously excluded from hot-relocation use.
|
Prevent multipathing/Suppress devices from VxVMs view
|
|
Excludes devices from VxVMs view.
The option to prevent paths from being multi-pathed
by the dynamic multi-pathing (DMP) driver, vxdmp, is deprecated.
|
|
There are three ways of specifying the devices on which these operations
are to be performed:
|
o
|
As a controller for all devices connected through the controller.
|
o
|
As a physical pathname for all devices under that path.
|
o
|
As a combination of the Vendor ID and Product ID (VID:PID)
for all devices of that type.
|
|
|
|
The option to define pathgroups and suppress all but
one path in the pathgroup is deprecated.
|
Allow multipathing/Unsuppress devices from VxVMs view
|
|
Makes devices visible to VxVM again. This operation can be performed
only on devices that were previously specified using
the "Prevent multipathing/Suppress devices from VxVMs view" option.
The option to allow paths to be multi-pathed
by the dynamic multi-pathing (DMP) driver, vxdmp,
is deprecated.
|
List currently suppressed/non-multipathed devices
|
|
Lists all devices suppressed from VxVMs view.
|
Change the disk naming scheme
|
|
Changes the disk naming scheme from the
hdisk# format to enclosure-based.
Alternatively, if the existing naming scheme is enclosure-based,
it is changed to hdisk# format.
|
|
This option is equivalent to using the
vxddladm set namingscheme={ebn|osn} command.
|
|
Note: Devices with very long device names (for example, Fibre Channel
devices that include worldwide name (WWN) identifiers) are always
represented by enclosure-based names.
This operation has no effect on such devices.
|
Change/Display the default disk layouts
|
|
Allows you to change or display the default disk format
and private region length that are used when initializing
disks.
|
List disk information
|
|
Displays a list of disks. You can also
choose to list detailed information about the disk at a specific
disk device address.
|
Dynamic reconfiguration operations
|
|
Enables you to change the LUN configuration dynamically,
without performing a reconfiguration reboot on the host.
Dynamic reconfiguration operations include
adding, removing or replacing LUNs, and replacing host bus adapters (HBAs).
See the Storage Foundation Administrator's Guide for more information.
|
|